Used Schaffer 2026 for sale (1,966)

Condition: used, mileage: 353,185 km, power: 350 kW (475.87 HP), first registration: 10/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: brown, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes-Benz 1848 LS, First registration: 10/2021 * Wheelbase: 3,700 mm * MOT valid until 11/2026 * Retarder * Euro 6 * German vehicle Special equipment: Bljdsxw Apajpfx Aafoc Axle load measuring device, work lights, audio system: digital radio DAB / DAB+, Comfort package, Media package, Safety package, MirrorCam exterior mirror base: chrome/body color, CB radio, aluminum air tanks, air horn, cab: movable entry, cab: air suspension, cab: shaving mirror, front suspension: 7.5 t, 2-leaf springs, tinted windscreen with sun visor strip, without radiator grille shutter, without aerodynamic underbody paneling, gearbox: 12-speed, type G 281-12, urea tank (AdBlue): 75 liters, rear end integral, automatic climate control, 3-piece mudguards, fuel tank: 570 l aluminum, left, 2-cylinder air compressor, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, rear overhang 1,050 mm, smoker package, rain sensor, retarder, fifth wheel coupling: manually lubricated, additional remote key (2), fleet management interface, seat cover/upholstery: front passenger seat velour, seat cover/upholstery: driver seat velour, cab seats: comfort air-sprung driver’s seat, electric sun blind for windscreen, sound system, external stowage hatch left, additional 12V/15A socket in front passenger footwell, additional 12V socket, automatic daytime running lights, preparation/switch for lift axle on trailer/semi-trailer, preparation for 4 surround cameras (display in instrument monitor), straight front axle, curtain for sleeper cab. Additional equipment: Emission standard EURO 6, storage over windscreen with lid, axle configuration: 4x2, front axle load 7.5 t, Actros 5, Actros L cab, heated approach/front mirror, trailer electrical and brake connection low, trailer socket 24V / 15-pin, step at driver’s cab left, exhaust on right outer side, Powertrain 2 package, MirrorCam exterior mirror camera, battery: 220 Ah, batteries arranged side by side, rear axle differential lock, torque increase in 12th gear, compressed air connection in cab, air drying unit with condensation monitoring, medium air drying unit, automatic driving light activation (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), driver assistance system: Lane Keeping Assist, cab: chrome interior package, cab: hydraulic tilting system, cab: L BigSpace, 2.50 m, flat floor, LED contour lights, suspension: steel/air, electric windows, vehicle without rear window, regulated 100 A alternator, speed limiter system, rear axle with active lubrication, unregulated, rear axle crown wheel 440, body/chassis: tractor unit, lower comfort bunk, comfort central locking, electronically regulated power steering, multifunction steering wheel, air intake behind cab, heated air dryer, engine: 12.8 l - 350 kW R6 diesel (OM 471), engine version OM 471, usage: short-haul, undefined wheelbase, wheelbase version 3,700 mm, curb mirror, residual heat utilization, disc brakes front and rear axles, remote key (2), side marker lights LED flashing, cab seats: passenger seat with functional adjustment, cab seats: foldable driver backrest, front spray protection, front axle stabilizer, storage compartments with lids behind driver and passenger seats.

Condition: used, electric motor, three-phase motor -Handover: in its current condition as inspected -Drive shaft: Damage, see photos Bodpfev N U Trex Aafslc Manufacturer: B

Condition: ready for operation (used), Siemens 6FC5357-0BA21-1AE1 NCU 572.2 Version: B SN:T-K32026206, used, normal signs of use, 100% functional, scope of delivery as per photos Bledpfx Aei Envxsafoc

Condition: new, Thermo Scientific 10PK, 500mL LABTAINER, AEGIS5-14 SH30961.14 exp. 2026.02.28 1 box, brand new never used. Blodpfx Aevv Razjafec

Condition: ready for operation (used), Siemens 1FT5074-0AC01-0 - Z Permanent Magnet Motor Z= see type plate, SN:E1S64234902026, the motor was overhauled at Siemens and then stored for a long time, used, normal signs of wear, 100% functional, scope of delivery as per photos Bsdoi D Sv Tspfx Aafslc

Condition: new, Siemens 1FT7066-5AF71-1CG1 synchronous motor SN:YFE6610254202026, unused in original packaging, 100% functional, delivery as per photos. Bjdpfxsx Du Dpo Aafslc

Condition: ready for operation (used), SEW R17 DR63S4/BR/TF 0.12kW, brake V 220-266 AC, serial number: 01.7389636401.0002.16, used, in good condition, 100% functional, scope of delivery as per photos. Bodpow D Ncvjfx Aafolc

Condition: new, Brinkmann SGL802 / 390-Z+002 SN:0411003202-61066001, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bodpoi D Hitofx Aafelc

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC Bsdpfxjx Eyhfj Aafelc -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: used, mileage: 1,001 km, power: 15 kW (20.39 HP), gearing type: other, fuel type: diesel, color: grey, empty load weight: 1,600 kg, number of seats: 2, first registration: 07/1938, Year of construction: 1938, driver cabin: other, Equipment: trailer coupling, Vehicle location: Bovenden, Manufacturer/Brand: Kramer Model series: K-series Model: K 18 (K 18 M) Construction: Carrying frame Production period: 1936?1950 Number of units: 6768 Dimensions Dead weight: 1650 kg Length: 2820 mm Width: 1450 mm Height: 1440 mm Wheelbase: 1800 mm Ground clearance: 250 mm Track width: 1250 mm front: 1250 mm Rear: 1250 mm Turning radius without steering brake: 2500 mm Blodpjvhlklefx Aafoc Standard tires: front: 5.50 x 16 rear: 8.00 x 20 Engine Rated power: 11.7-14.6 kW, 16?20 hp Rated speed: 1500 rpm Number of cylinders: 1 Displacement: 1639 cm³ Fuel: Diesel Cooling system: Evaporative cooling Drive system Drive type: Rear-wheel drive Gearbox: 4/1 gearbox Maximum speed: 15 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, empty load weight: 570 kg, maximum load weight: 2,030 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 300 mm, loading space volume: 2.6 m³, color: silver, construction height: 930 mm, working width: 2,100 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium drop sides foldable all round, * IMMEDIATELY AVAILABLE * incl. aluminium drop sides foldable all round Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600kg - Unladen weight: 570 kg - Payload: 2,030 kg - Interior dimensions: 426 x 204 x 30 cm (L x W x H) - Overall exterior dimensions: 564 x 210 x 93 cm (L x W x H) - Loading sill height: 69cm - Tires: 165R13 steel rim - Brakes: Yes - Support wheel: Yes, automatic - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Side walls: Anodized aluminium, double-walled - Side wall height: 30cm - Removable side walls: Four walls can be folded down - Side wall hinges: 4 on the side / 3 at the front + rear - Removable corner stanchions: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: V-drawbar - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 8 recessed inside, + 8x under loading area - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant side member chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - corner stanchions with insertion option for attachments or grids - maintenance-free rubber spring axles - axle with continuous axle beam and independent wheel suspension - 8 folding lashing recesses, recessed in the floor frame profile - 8 lashing eyes under the loading area - recessed long lever locks - sturdy V-drawbar - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - reversing lights - large reversing light - large rear view mirror - rear view mirror - rear view mirror - rear view mirror - rear view mirror - rear view mirror. plug - reversing light - large safety lighting - lighting recessed in the rear frame - integrated rear fog light - 13-pin plug - support wheel in the middle - registration certificate Plug - Support wheel in the middle - Registration papers: Vehicle registration document (ZBII) & COC papers Accessories can be retrofitted - please enquire: - Perforated railing on dropside - High front grille - High tarpaulin - Dropside attachment - Aluminium cover - Corrugated grille attachment 65cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bsdpfxju Htqus Aafolc

Condition: as good as new (ex-display), Miltenyi Biotec Cytokine Vial Adapter 170-076-627 exp. 2026.02.20 Total stock 24 boxes, 2 pcs per box, price is for one box only Bljdpfx Aevv If Usafec Brand new never used. Please check out our other listings as well.

Condition: new, Thermo Scientific 10PK, 1000mL LABTAINER, AEGIS5-14 SH30961.15 exp. 2026.03.31 Bodpfevv Ra Ijx Aafelc One box, brand new never used. Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, Submission of a bid obligates timely collection by 27/02/2026! TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Free lift: 1,670 mm Fork length: 1,200 mm Blsdpfx Asyfpa Ajafsc MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated sideshift Load backrest Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min Bsdpfx Aajyfn Ewsfjlc MACHINE DETAILS Connected load: 4 kW Voltage: 400 V Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings 2 fully automatic vessel drain valves KN 1.230

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Bjdjyfnqtspfx Aafjlc Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe Bedex Hwfqopfx Aafelc - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 Bledpfx Aaox Hxz Hsfec - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 Bsdpjx Hwn Sjfx Aafolc - Diameter for deep holes: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA - Bar clamping diameter: from 3 to 20 mm - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min Blsdpsx Hwlwsfx Aafjc - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V Bljdpfx Aaex Hwhfofec - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck Blsdpex Hwguofx Aafsc

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm Blodpfex Hwf Rox Aafjc The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz Bedpfx Aajx Hwanefolc - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1310370, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 18 m/min, total height: 2,200 mm, total length: 1,500 mm, total width: 1,500 mm, overall weight: 2,000 kg, bar diameter (max.): 35 mm, controller manufacturer: FANUC, controller model: SERIES oi-TD, bar diameter (min.): 26 mm, TAKAMAZ XL-100 CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz Bljdpjx E T Tzefx Aafjc - Connected load: 23 kVA - Chuck size: 6 inches - Max. swing diameter over bed: 320 mm - Max. bar diameter: 26/35 mm - Spindle bearing diameter: 75 mm - 12-position turret - Max. X-axis travel: 120 mm - Max. Z-axis travel: 280 mm Note: The item must be collected definitively between 04 and 12 March 2026 on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck