Used Roeder for sale (130)

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front Todpfx Afsxacfyo Tef - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled Tjdpfx Afevri Nmo Tjf - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Year of construction: 2011, condition: excellent (used), Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 Tsdpfxjlnixis Af Tjf max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier Todpfxstpnlde Af Tof - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 290192, type of input current: three-phase, input voltage: 400 V, Equipment: type plate available, Parquet production line by German company Schroeder pake 70 (the Mercedes among parquet machines). The line is designed for planing short elements. The line consists of: 1. Jointer 2. Schroeder belt conveyor, year 1992, type SV 3. Schroeder feeder, year 1992, type MA 4. Belt conveyor/transport belt, year 1992, type B25 5. Planer (parquet planer), year 1990, type Pake 70 — This is a planer with precise chain feed, suitable for planing short elements. Processing width: max 150 mm, min 30 mm; thickness max 60 mm; equipped with 4 spindles. Tedpfoxc Tw Eex Af Tof 6. Conveyor with right/left turner or Schroeder belt conveyor, year 1992, type Pakue 5 7. Tenoner/cross-cutting machine Schroeder, year 1997, type Pakue-5 — Used for cross-processing of parquet or boards. Maximum length 1200 mm, minimum length 180 mm. Besides parquet and boards, the line can also be used to produce micro-jointed battens.

Condition: excellent (used), Year of construction: 1986, Window patch machine Tjdpswb Dqpjfx Af Tof Heiber & Schroeder Year 1986 Model WP1

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear Tedpfx Afoxacd Nj Tef - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Fortuna Automat Grüße 4 E 30-part roll press With moulding deactivation Dough input: 1200–3300 grams Tjdpfxexcqgdj Af Tef Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Knives made of stainless steel Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: reconditioned (used), Year of construction: 1997, machine/vehicle number: 06143797, Schröder 61 Needle injector Year of construction 1997 Suitable for meat with bone and fresh meat 60 cycles per minute with 40mm advance per stroke Tsdpfx Ajrw Arajf Tsf Hourly capacity 3000 KG

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard Tsdpfx Afjxc Ei Ho Tjf - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal Tsdpfx Ajw U Srysf Tjf - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801

Condition: good (used), Year of construction: 1999, functionality: fully functional, total length: 1,200 mm, total width: 150 mm, Workpiece dimensions: - Length from 300 to 1200 mm; - Width from 70 to 150 mm; - Thickness from 10 to 25 mm; Maximum feed speed: 20–25 m/min. Tsdpow Smcnjfx Af Tof

Condition: used, Year of construction: 2003, sheet width 1020 mm plate thickness 4.0 mm distance between columns 1100 mm stroke of upper beam 250 mm Lower beam adjustment 50.0 Tsdpfxjxab Slj Af Tof back stop - adjustable max. 750 mm control POS 400 total power requirement 4.4 kW weight 1960 kg range L-W-H 2065 x 1500 x 1425 mm Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch - 1x set of bending tools - Emergency stop button at the front - Original operating instructions

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tjdpfx Aow Einujf Tjf Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation

Year of construction: 2010, condition: ready for operation (used), Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t. Tsdokvpgfepfx Af Tef

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm Tjdjw Sthdepfx Af Tof - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch Tsdexabc Rspfx Af Tof - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2000, A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible. Tsdpfx Afjwtg Hke Tjf

Condition: used, Year of construction: 2008, machine/vehicle number: 150344, Order No. 25052 Technical Specifications: - Maximum working width: 2020 mm - Maximum material thickness at 40 kg/mm² strength: 2 mm - Bending angle adjustment: 0 - 135° - Upper beam clamping via eccentric lever + foot pedal - Maximum opening width/stroke of the upper beam: 100 mm - Height adjustment of the lower beam: 25 mm Tjdsv Rbq Topfx Af Tjf - Space requirement: approx. W 2950 x H 1200 x D 800 mm - Weight: approx. 1450 kg

Condition: used, Year of construction: 1996, sheet width 2040 mm Todpfx Aexaa Edjf Tef plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO total power requirement 5.5 kW weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Todpfjt R Tq Isx Af Tsf

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190459, Offer 25316 Technical Data: - Max. working width: 2,040 mm - Max. material thickness at 40 kg/mm² tensile strength: 3.0 mm - CNC position control POS 400 for 9-program memory - Bending angle adjustment: 6° to 135° - Maximum opening width / stroke of the upper beam: 250 mm - Height adjustment: - Bending beam: 50 mm Tedoxc Egrjpfx Af Tjf - Lower beam: 50 mm - Upper beam drive: 400 V / 2.2 kW - Bending beam drive: 400 V / 2.2 kW - Electric foot switch - Manual backgauge - Segmented box and pan (gooseneck) tooling - Required space: approx. W 3,100 x H 1,450 x D 2,200 mm - Weight: approx. 2,800 kg

Condition: used, Year of construction: 1991, sheet width 2050 mm Todpow U U Uksfx Af Tsf plate thickness 3.5 mm distance between columns 2100 mm stroke of upper beam 250 mm adjustment UW 80.0 mm work height max. 920 mm total power requirement 6.0 kW weight 2910 kg range L-W-H 3185 x 875 x 1450 mm Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Tedpjtphubjfx Af Tjf

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Technical data: - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm Tsdsu Eq Rpspfx Af Tsf - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg