Used Ra 630 for sale (16,504)

Condition: new, Year of construction: 2026, RA-800 ASPHALT RECYCLER A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). Isdpfet Ifxlex Ahvjap ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection.

Condition: new, Year of construction: 2026, Available in stock Worldwide delivery Diesel engine. Drum capacity (0,8 m3). Fuel tank for 50l (equipped with a fuel level indicator). Control panel with indicators. Mixing of asphalt inside the tank. Front loading/unloading. More options: Bucket + trailer Trailer Ijdpfx Aed Swnvjhvsap No trailer, no bucket

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). Iajdpfx Ahsvrw Anevjp ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: excellent (used), Veneer gluing machine 630 TFW/Mini - Throat depth: 630 mm - 220 Volt Iaedpfjytv Snox Ahvop - 30 kg - 880 x 370 mm x 550 mm height

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 103 mm, turning diameter: 630 mm, center height: 315 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 11 rpm, overall weight: 3,300 kg, Parallel Lathe ZMM-SIBIMEX CU 630/2000 Year of manufacture: 2007 CE certification Excellent overall condition Centre height: 315 mm Max turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 430 mm Iodpjytpqqofx Ahvsap Swing in gap: 830 mm Spindle bore: 103 mm Bed width: 400 mm Motor power: 11 kW Weight approx.: 3300 kg Number of speeds: 11 Spindle speed: 11.5 - 1250 rpm Machine complete with steadies Self-centering chuck Live tailstock Elbo axis readout Rapid feeds Machine complies with safety regulations

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight Ijdpfx Ajv Sq Rljhvsap

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 615 mm, total width: 2,420 mm, total length: 1,175 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, electrical fuse: 16 A, year of last overhaul: 2026, opening width: 30 mm, working width: 615 mm, type of input current: three-phase, Fritsch Rollfix 3/630 Dough Sheeter for all dough types – sheeting and laminating robust engineering machine is mobile NEW belts DGUV V3 inspected – exclusively by us Ijdpfxeytlz Ss Ahvoap Connection: 400V, 16A-CEE plug Used machine – refurbished & SAB tested with warranty + spare parts service Options: Maintenance contract Spare parts box Service package Delivery service Commissioning & training Many more TOP-quality dough sheeters in stock!

Year of construction: 1964, condition: excellent (used), Description to follow! Isdpfx Ahoytg U Tjveap

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in a galvanized housing with sound insulation -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm Iedpfxeb A H Raj Ahvoap -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Condition: like new (used), functionality: fully functional, VENEER SPLICER machine model KUPER FWM 630 T second hand machine volt. 220 single-phase Iedpfx Ahoyuy Ehevjap CE compliant machine : YES

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3-meter guillotine shear from Amada Iaedjytbxtopfx Ahvjp Model: GPS 630 Capacity: 3100 x 6 mm Electric back gauge Year of manufacture: 1994

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 630 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a professional Griggio PSA 630 thickness planer in good condition. The machine comes from a customer operation and is technically fully functional. Technical specifications: + Manufacturer: Griggio + Model: PSA 630 + Year of manufacture: 2007 + Motor power: 5.5 kW + Planing width: 630 mm + Cutterhead: Tersa knife cutterhead (quick knife change) + Number of knives: 4 (new) + Cutterhead speed: approx. 5,000 rpm + Feed speed: infinitely adjustable + Max. planing height: approx. 300 mm + Min. workpiece height: approx. 4 mm + Extraction port: approx. 120 mm + Power connection: 400 V / 3 phase + Weight: approx. 650 kg Equipment: + Sturdy cast iron construction + Precision planing table with height adjustment and digital display + Tersa system for quick knife change + Powerful industrial motor Condition: + Well-maintained, good condition + Fully operational + Ready for immediate use Inspection and test run possible by arrangement. Loading can be organized. Ijdpfx Ahoyuvgbjvoap Please contact us if you have any questions. Location: 39340 Haldensleben Price: €5,350

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph Iodpfx Ahsku Abisvsap knives: 30 pieces concave, multiple rotatable rotor diameter: 260 mm Rotor design: EcoRings Control system: PLC Siemens S7-1200 cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm

Year of construction: 2000, condition: used, Used Ras Reinhardt 62.30 TURBObend Plus cnc folder for sale Iaodpfxjf Ar Ihj Ahvsp We had two of these Ras folders in stock, one has sold and this is the last one left in stock available for sale. Ras cnc sheet metal panel folder / Ras cnc electric motor driven folder for sale. Model: 62.30 Turbo bend plus Capacity: 3metre x 2mm Year: 2000 Back gauge: 9 powered fingers Cnc graphic touch screen control: Series 5000 We are also interested in buying used Ras folders that are for sale or for part exchange, examples below: Bending machines RAS Flexibend 73.30 RAS GIGAbend 76.30 RAS We can deliver and install in your factory at additional cost with a Ras folder service engineer in mainland uk, delivery can be arranged overseas or we can load to your transport.

Year of construction: 2003, condition: excellent (used), Amada GS 630 sheet metal hydraulic cutting machine for sale G Series Hydraulic Shear – Video at the bottom of this listing Iaodpfsimwcqsx Ahvep Specification: Model: 630 Max Plate Thickness mild steel (mm): 6.35 Max Plate Thickness stainless steel (mm) 4 Max Cut Length (mm) 3050 Max Stroke / min 35 Motor Size (Kw) 5.5 Machine Weight (Kg) 6150 Back gauge speed (mm/s) 100 Back gauge Range (mm) 10-1000

Condition: used, Year of construction: 2009, Teach-in lathe VDF BOEHRINGER - DUS 630 Ti MACH-ID 9453 Iajdpjyr D Dcjfx Ahvop Make: VDF BOEHRINGER Type: DUS 630 Ti Control: Siemens Sinumrik Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm Iajdex Imrcjpfx Ahvop • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Condition: ready for operation (used), Year of construction: 2010, number of axes: 3, This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. • 6-station rotary table • 2 honing stations • 2 measuring stations • 1 brushing station Additional equipment • Robot feeder (enables full automation) Iaodpex D Rinefx Ahvop

Year of construction: 2019, condition: ready for operation (used), This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. It's mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information. • Condition: From industrial environment, fully functional, ready for immediate use • Drive: 11 kW • Transmission: 2-speed manual • Cutting speed ranges: 27–142 m/min and 410–2200 m/min • Guides: Complete roller guide incl. guide rollers • Table: Feed table with 4 T-slots • Safety: Mushroom emergency stop button • Technical data: • Saw blade length: 5180 mm • Max. cutting height: 460 mm • Max. cutting width: 605 mm • Table size: 740 × 785 mm • Table load: 250 kg • Operating voltage: 400 V Additional equipment • Extra protective cabin (can be dismantled for long workpieces) • LED work light • Machine mounted on steel plate (stability base) Iodpfsx D Hqbox Ahvjap • Spare saw blades included

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm Iedpfxsyf I U So Ahvjap • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4 Isdpfxjyap Uij Ahvjap

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Iaedpfx Aeyallkshvep Extra Information Machine still under power Technical Specification Taper Size ISO 40

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Iaodpsyaizijfx Ahvjp

Condition: ready for operation (used), Year of construction: 2013, number of axes: 3, This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. • 6-station rotary table • 2 honing stations • 2 measuring stations • 1 brushing station Additional equipment • Robot feeder (enables full automation) Iaedpsx D Rihjfx Ahvsp

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door Iajdpfxjx D Rqro Ahvop • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled