Used Printed Circuit Board Assembly for sale (17,505)

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Ljdjgwqk Sopfx Af Eeru Conveyors system between the machines included.

Condition: good (used), Year of construction: 2008, Hydraulically height-adjustable lifting cart by Witte - Alufix for loading coordinate measuring machines (CMM) With Hovercraft air bearing plate Lredpfx Ajw Nylkjf Eju Hydraulic lift cart with height adjustment from approx. 660 to 950 mm. Table surface is coated and equipped with a roller on the broad side to bridge height differences between the table and the measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy sliding and positioning of heavy workpieces on coordinate measuring machines. The surface features a 50 mm grid of holes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and are fitted with M6 threaded inserts at the bottom. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted workpiece to be moved very easily. Usable surface area (aluminum): approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive industry, etc. Dimensions: approx. 1000 x 800 x 660/950 mm (LxWxH). Weight: approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are operational and ready for demonstration in our warehouse—see “further offers from this seller.”

Condition: used, Spacer board hill Ledpew Tzgwjfx Af Ejru

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Lrodpfx Afsw Tcu No Eju Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: good (used), Steel Hall 15 x 17 m – with Complete Electrical Installation, Gates, Windows & Structural Calculations For sale is a solidly built steel hall measuring 15 x 17 m with a clearance height of 4.10 m. • Year of construction: 2004 • Dismantled: 2024 – fully disassembled, ready for transport • Structure: heavy-duty steel beams, very robust • Equipment: • 2 electric entrance gates (height 4.10 m) • 1 entrance door • 3 windows with roller shutters • complete electrical sub-distribution including gate controls • lighting, sockets, switches & wiring included • Documentation: full structural calculations available ✅ Ideal as a workshop, warehouse, machinery hall or for agricultural use. ✅ All components included – ready for immediate assembly. ✅ Crane loading on site possible. 👉 Collection by buyer, price negotiable. 👉 Pictures and further information available on request. Ljdpfxsw Tcmrs Af Eoru

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Lsdpfx Ajfgpfmsf Ejru Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 2,620 mm, table height: 1,114 mm, total width: 850 mm, total length: 1,869 mm, pressing force: 30 t, table width: 600 mm, table length: 600 mm, overall weight: 2,900 kg, Weight approx. 2,900 kg Ljdevhcykspfx Af Esru Table top size 600x600x100 mm, plus 50 mm free space behind the top up to the back of the press Fixing points of the table in 600, 800, 1000 mm. Ram travel 400 mm Motor 3 KW 60 liter hydraulic tank Speed downwards 10 mm/sec. Upwards 24 mm/second

Condition: good (used), functionality: fully functional, machine/vehicle number: 552410, Year of construction: 1974, Manufacturer: Bobst, Switzerland Model: Autoplatine SP 1420 E – 600 T Type: Die Cutting Machine / Autoplatine Year of manufacture: 1974 Machine No.: 552410 Technical specifications: - Max. sheet size: 1420 x 1020 mm - Min. sheet size: 700 x 500 mm - Speed: up to 4,500 sheets/hour - Power supply: 380 V, 50 Hz Features: - Robust construction for carton and corrugated board - Automatic platen die cutting - Pile feeder and delivery Lredpfx Ajw Rb Ezjf Eeu - Mechanical control with operator panel - Proven Swiss quality

Condition: new, Year of construction: 2025, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION * Pneumatic drive – working pressure 7–9 BAR Ljdpfxol D Nkze Af Ejru * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers AVAILABLE IMMEDIATELY – we ship to every country in EUROPE

Condition: ready for operation (used), Siemens 462007.7605.02 Board from Siemens 6SC6115-5VA01, used, minor signs of use, 100% functional, scope of delivery as per photos Lsdpfei Edbnjx Af Eeru

Condition: used, Year of construction: 2006, functionality: fully functional, Slightly used assembly tables from Ruchser. We have used them to assemble Schüco windows and doors. We are selling them because our production has ceased. Lrjdpfsw Nyk Tex Af Eeu

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg Lsdpfx Aohalvdjf Eoru dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V Lrjdpfsvntdmsx Af Esu – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Ljdpjibx S Nefx Af Eeru Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: new, power: 330 kW (448.67 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab Lrjdpfx Aotv T Avsf Eju * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * RR, not applicable * Emission standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Standard component layout * Fuel tank on the left * DAF Connect * Warranty Plus Driveline – 3 years / 300,000 km Options * Exterior sun visor * LED headlights, cornering and fog lights * Central locking, 3 keys, 2 remote controls * Lower cab step in Crystal White * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver’s seat: Luxury Air * Armrests on both sides of driver’s seat * Passenger seat: Cinema and table, fabric cover * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Electric roof hatch * Accessory power supply: Standard + 2x 40 A * ECAS remote with extended features * Preparation for toll system * Digital tachograph, VDO 1C, Version G2V2 * Speed limiter setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Antennas: DAB radio prep., 2x mobile, GNSS extra, CB * Wireless charger * Reversing warning system * Front axle: 8.00 t, air suspension, 161 N * Air suspension front: Medium * F1,315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1,315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2,315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 engine, 330 kW/449 hp, cab badge: 450 * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 ratio * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assistant * Wheelbase 4.60 m / rear overhang 2.55 m * Longitudinal beams 260/7.0 mm, continuous inner reinforcement * 545-litre aluminium fuel tank left, height 620 mm * Application with drawbar, type plate, up to max. GVW * Crossmember D137 + Rockinger coupling D130 * Pneumatic trailer coupling, rotary coupling * Electrical connection for trailer, 24 V / 15-pin * Hard-wired body builder signals and warnings * Side marker lights * Body mounting method BAM 1, console type B * Tail lift application * Fixed steering right, no first right * Alternator 130 A, batteries 2 x 210 Ah AGM * Battery energy monitoring Body: ZIKUN Swing-Board I body Technical data: Through-loading length: 7,250 mm Load length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Loading height: approx. 1,199 mm Overall height: approx. 3,549 mm Substructure: robust lightweight construction ZIKUN folding swing mechanism Fixed roof powder-coated RAL 9010 Pure White Collision protection: welded steel impact bar on both sides as bumper protection. --PVC mudguards on rear axle --Holder for wheel chock + 2 chocks --Red position lamps above tail lift --Contour marking: side in white, rear in red The entire body sandblasted, primed, and painted in single colour or powder-coated. Subframe and body: DAF E1980 WHITE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring-telescopic rods (CRS system Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL). Sliding access step Pallet impact edge left and right Interior lighting as LED spotlights mounted at the rear upper area, with connection at cab switch. Additional interior lighting as LED spotlights mounted at rear. Front wall/impact protection plate made from aluminium profile Front wall, lower area:

Condition: ready for operation (used), Marposs 6320600900 CPU Board, used, normal signs of use, 100% functional Lredei Eb A Ajpfx Af Esu

Condition: good (used), Year of construction: 2011, TAF item number: 1000003779 Lrjdpfx Afsm Twvzs Eeu Manufacturer: Dörr Year of manufacture: 2011 Overall dimensions (LxWxH): 1,550 x 500 x 420 Width incl. side panel in mm: 495 Width incl. drive in mm: 510 Side height in mm: 150 inside - 225 outside Conveyor width in mm: 300 Curve (degrees): 90° Curve radius, inside: 550 Curve radius, outside: 1150 Belt type: PVC, smooth Belt width in mm: 400 Sliding surface: steel Running direction: right Drive: centre station Motor type: gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.45 m/s Net weight in kg: 90 Condition: used / fully functional Function test: OK

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet Ledpfxjwkvi Ne Af Ejru - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Lsdswhc U Tepfx Af Eeru

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm Lredpfsfx Hxzex Af Eju guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Lodewf Rnvjpfx Af Esru I will sell to the company that offers the highest price.

Condition: used, Heavy-duty shunting trolley, heavy-duty transport trolley Lsdpfxorktlfe Af Eoru Assembly trolley, heavy-duty trolley DIRK PROKOP type 10001-4 Very stable special design Load capacity: 1800 kg Loading area: 2720 x 930 mm Load carrier length: 2720 mm Load carrier width: 140 mm Load carrier height: 135 mm Ground clearance under the load carrier: 100 mm Height of upper edge of load carrier from floor: 235 mm Ground clearance of heavy-duty castors: 15 mm - 2 load carriers made of double-T steel bolted to both sides of the trolleys - Load carriers can be easily separated from the trolley using locking bolts - Chassis with very sturdy swivel castors with central brake - Can be moved in all directions (lengthways, crossways, crab steering, etc.) - Load carriers can be driven under with a normal pallet truck to unlock the trolleys - Ideal for in-house transportation of switch cabinets or machine parts for assembly. - The parking brake device and the support blocks on the longitudinal beams can be easily removed. Overall length with trolleys: 3450 mm Width of the trolleys: 980 mm Unladen weight: 350 kg Very good condition

Condition: used, Bar contactor, DC contactor, contactor, DC switch, power contactor, circuit breakers, high voltage switches ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: normally closed Main contacts Design: open mounted on ingots Drive: Alternating current + bleached magnetic circuit +rectifier + economy resistor Drive Nominal voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact Nominal voltage: 1500 VDC Number of main contacts N/O contact: 0 Number of main contacts normally closed: 3 Number of auxiliary contacts: 1 NC contact + 1 NO contact + 1 changeover contact Auxiliary contact rated current: 6 A - Main contacts with deion chambers for fast spark quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Lrjdpfefipfujx Af Eeu Used but in very good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Lrjdpoh U Dtujfx Af Eeu Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Mobile jib crane, gantry crane, traveling crane AUSTEN type HVR 05 Serial no. 1808137 Year of construction 2019 Load capacity 500 kg Projection of load hook to foundation foot max. 650 mm Overall height 3025 mm Height to lower edge of crane crossbeam 2945 mm Ledpfji Aqgtjx Af Eoru Height to crane suspension eye 2900 mm 2850 mm Travel distance of crane spreader beam 1250 mm Span of crane spreader beam 1145 mm (center roller - center roller) Internal distance between the supporting structure 1080 mm Foundation base plate with steel weight (painted blue) 1320 x 800 x 850 mm - Aluminum support structure, removable - Crane crossbeam can be rolled by hand on crane runners - The crane frame is set up without being connected to the ground and is self-supporting due to its high dead weight. - Steel base (painted blue) Width 1320 mm, depth 800 mm, height 850 mm - The base is made entirely of steel and has a dead weight of 800 kg - Mobile with pallet truck Own weight 800 kg Very good condition Price without lifting gear