Used Portable Power Generator for sale (44,905)

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Cjdpfsyhc Rmjx Ac Nopu

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Cpedoyhc Irepfx Ac Nsu Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-480-48 -Input: 100-240 VAC 5.0 A 50/60 Hz -Output: 48 V / 10 A -Quantity: 1x power supply unit included -Dimensions: 130/85/H140 mm Cpsdpfx Aoyhbayec Nou -Weight: 1.6 kg

Condition: new, Clean Air Filter Type: Power Unit 300 P Offer Type: New Machine Technical Specifications: Motor Power: 7.5 kW / 3-Phase / 400 V / 50 Hz Intake Port: NW 300 mm Nominal Flow Rate: 5,089 m³/h Max. Flow Rate: 6,000 m³/h Valve Pressure at Vnom: 2,434 Pa Cpsdpshfmpxefx Ac Nou Filter Area: 30 m² Compressed Air Cleaning Incl. Integrated Pre-Separator Incl. Integrated Automatic Extinguishing System Chip Collection Volume: 3 x 250 l Sound Pressure Level: 71 dB(A) Incl. Dust Partition Dimensions L x W x H = 3,000 x 1,058 x 2,361 mm Weight: 838 kg

Condition: used, Holz Her Auriga 1308 XL POWER Compact design – Edge thickness 0.4 – 8 mm Motorized bridge adjustment SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control, including cleaning routine fa.s.t. setting technology “Set-up in the gap” Long infeed fence with motorized adjustment Pre-milling unit for material preparation before gluing Fully automatic edge magazine for rolls and strips Glue application station GLU JET for cartridges + PU gluing, with sensing nozzle Workpiece height 8-60 mm Cpjdpfxeyg Itqo Ac Nou High gloss package Pneumatic pressure unit Pneumatic end trimming unit for rolls and strips up to 8 mm edge thickness, with pneumatic tilting from 0-10° for the trim saws FR301 MOT6 multifunctional milling unit: flush milling up to 8 mm, radius and bevel milling at 15° via NC axis FF301 MOT1 contour milling unit: rounding corners up to 3mm edge thickness or optional 45° bevel, working height 12-60 mm, postforming possible ZK301 MOT4 scraper unit for bevels and radii with 2 scraper holders, NC axis-controlled FK701 surface scraper unit with pre- and post-sensing – for finishing Buffing unit – polishing Spraying device at infeed and outfeed Complete DIA (diamond) tooling included First delivered in 2022 Machine in TOP CONDITION from small business closure Available ex-stock Lieboch

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW Cpodpfxoygx Tzj Ac Nsu - Year: 2013

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Csdpfx Acjygwfij Nopu Production country: NL Please contact Michael Overmeer for more information Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Cpsdpfx Ajygqnksc Nju DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Year of construction: 2012, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit Cpsdpfx Aoh I Ez Dsc Nju -Manufacturer: SAB, Power generating unit type D-4107 F -Previous use: Ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Note: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: used, Entionisierung – Entladenetzteil / Deionization – Discharge power HAUG EN-8 Baujahr / Year 2004 - Serial-No. 933594/40 2 Stäbe, Länge jeweils 70cm lang / 2 Rods length each Rod 70 cm long zum Entfernen elektrostatischer Ladungen /  for removing electrostatic charges Funktionsprinzip Die anliegende Netzspannung wird durch einen Hochspannungstransformator auf 7–8 kV Wechselspannung transformiert. Die im Sekundärbereich integrierte Funktionsüberwachung meldet die Unterschreitung der Koronaeinsatzspannung (= Wirkungsbeginn von Ionisationsgeräten) durch Blinken der Kontroll-LED. Operating principle The applied mains voltage is transformed to 7-8 kV AC voltage by a high-voltage transformer. The function monitor integrated in the secondary section signals that the corona inception voltage has been undershot (= start of effect of ionizing units) by flashing the control LED. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Cpedexlri Sopfx Ac Nsu On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2007, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Cpodpfx Aeyghunsc Nju -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, A Spanner RE2 Facelift wood gasifier in good condition is for sale. The unit can be inspected in Brixen / South Tyrol. Codpsxuqpvefx Ac Nopu

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none 8x Thermo-King 2013 Clip-on SG 3000: - ID 10756 - 12.148 hours Cpodpewp R A Isfx Ac Neu - ID 10757 - 14.130 hours - ID 10760 - 11.946 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours - ID 10766 - 11.146 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: excellent (used), Year of construction: 2019, operating hours: 7,911 h, fuel type: diesel, color: white, Year of manufacture: Feb 2019 Field of application: Construction Cjdpjyf U Hujfx Ac Nopu Technical condition: very good Visual appearance: very good Please contact Arie or Pedro for more information 7911 running hours

Condition: repair required (used), operating hours: 15,960 h, functionality: not functional, overall weight: 2,383 kg, 1 x Atlas Copco QAS 138 Only 15,960 operating hours – not functional Ex works DK-6330 Padborg. Cpodpfx Acjyhqmvj Nou Rated power: 125 kVA Rated current: 180 A Rated voltage: 400 V Cooling: Water Series: QAS Engine power: 140 kW Weight: 2,383 kg

Condition: good (used), Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive Cedpju Dcv Uefx Ac Nepu -Type: BUS624-38/55-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x38A 0-300Hz -Number: 4 servo power units available Price: per piece -Dimensions: 190/380/H300 mm -Weight: 14 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, fuel type: gas, mast type: simplex, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, empty load weight: 12,270 kg, total length: 3,550 mm, drive type: Treibgas, construction width: 2,000 mm, LPG forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 8.25-15 Csdpfx Acewgp Nho Nepu Rear tires type: super elastic Rear tires size: 8.25-15 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Power+ 987 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork adjustment device, Heating, full cabin, Rotating driver's seat

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Cpedpfoi Uli Eex Ac Neu

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container / Swap Body 30,900L / 1 compartment UN PORTABLE T11 Bottom discharge Cjdpfjyha T Ejx Ac Nopu Steam heating Insulated Payload: 31,900 kg Design temperature: -40 to +130°C 5Y/CSC inspection valid until 08/2028 = Additional Information = General Information Year of manufacture: Apr. 2003 Model year: 2003 Weights Tare weight: 4,100 kg Payload: 31,900 kg Gross vehicle weight: 36,000 kg Functional Internal loading volume: 30,850 l Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: very good Visual condition: good For more information Please contact Arne Honingh for further details.

Condition: used, Year of construction: 2019, operating hours: 9,227 h, fuel type: diesel, motor manufacturer: FPT Iveco, Field of application: Construction Empty weight: 1.583 kg Cjdpfjyg U R Asx Ac Nspu Generator capacity: 60 kVA Please contact Kristoff Van Havere for more information

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Discount: You get a 20% discount on this item -Soundproofed: 91 dB -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg Cpsdpfscgan Asx Ac Neu

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: gasoline, Generator Husarex BS 6500 5,5kW , electric starter Provide electricity anywhere! Technical data: - engine type: single-cylinder, four-stroke , air-cooled - engine rated power: 13 HP - starting type: electric starter or manual starter - fuel tank capacity: 25 l - maximum power of power generator: 5.5kW - rated power of current generator: 5 kW - copper generator - 12V DC output - generated electrical voltage: 220V - current frequency: 50Hz Csdpfx Acoui Nrrj Nspu - dimensions: 710x530x550 mm - weight: 75 kg Our units are excellent value for money. We care about our product, so each production batch is inspected.

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: gasoline, Husarex BSR 2000IS 2kW inverter generator set , suitcase Provide electricity anywhere! Technical data: - engine type: single-cylinder, four-stroke , air-cooled - EKO mode - engine capacity: 79.7 cm3 - maximum engine power: 2.9 HP - rated engine power: 2.6 HP - diameter × stroke: 46.8*43 - starting type: manual - fuel tank capacity: 4L - oil capacity: 0.38 L - recommended oil: 10W30 - maximum power generator power: 2kW - rated power of current generator: 1.8 kW - 12V DC socket Csdpfx Aeui Nuasc Nepu - generated electrical voltage: 220V - rated current: 8.3 A - current frequency: 50Hz - dimensions: 498x290x459 mm - weight: 22 kg Our units are excellent value for money. We care about our product, so each production batch is inspected. The genset has an EKO mode, turn it on in case of low power consumption so that your genset burns less fuel and the noise level decreases even more.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Cpjdpfou Ez Husx Ac Neu Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: good (used), Year of construction: 2014, clamping force: 11,500 kN, Equipment: documentation/manual, MC6 controll panel Blue power Clamping force: 1150 t Tie bar distance HxV: 1580x1280 mm Screw diameter: 90 mm Shot weight: 2084 g Shot volume: 2290 cm3 Type: Horizontal Cpedpfxeyfgx Ao Ac Neu Drive: Hydraulic