Used Planer Knife Shaft for sale (9,288)

Condition: new, Cardan shaft balancing machine BVI-03-74 Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. Dcedpepbv Tfsfx Af Ien This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 9409009, working width: 260 mm, planing height: 150 mm, planing width: 260 mm, working height: 150 mm, power of feed motor: 11 W, workpiece height (max.): 150 mm, workpiece width (max.): 260 mm, Equipment: rotational speed infinitely variable, For sale: Four-sided planer, maximum planing size 150x260mm. Feed speed steplessly adjustable from 6 to 36 meters per minute. Motor 1 Bottom spindle 11 kW Motor 2 Right side 11 kW Motor 3 Left side 11 kW Motor 4 Top spindle 11 kW Motor 5 Right side frequency-controlled 11 kW Motor 6 Dcsdexlf E Topfx Af Ion Left side frequency-controlled 11 kW missing Motor 7 Right side frequency-controlled saw shaft 18.5 kW Motor 8 Left side frequency-controlled saw shaft 18.5 kW With spindles 7 and 8, sawing widths of over 200 mm are possible.

Condition: used, Year of construction: 1992, Used machine Dedpsxgkf Usfx Af Iecn Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: new, Gearbox for easy changing of the PTO direction. Handy for drilling manure mixing. Dcedpfx Aoxldnmsf Ien Condition: New

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration Dedpfx Aexlcvcsf Ijcn ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Ttim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Dcsdpswpfv Ajfx Af Ion Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, all stainless steel 2 front discharge guards 2 mixing directions safety lid overall dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm Djdpfx Afexgg Ixo Iocn

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Djdpfx Ajxgfqfsf Ijcn Automatic waste feeding

Condition: refurbished (used), Backus Sormac BV potato knife peeler, diameter screw: 400 mm, tier: 150 mm, diameter drum: 750 mm, clearance: 700 mm x 400 mm, total dimensions: 3400 mm x 1350 mm x 2200 mm. Dcsdpfx Aor Dd Hvsf Isn Currently with old blades. For an extra charge we can change the blades for new ones. Electronically and mechanically refurbished.

Condition: used, Year of construction: 1971, operating hours: 4,348 h, functionality: unexamined, machine/vehicle number: 462-1717, Used moulder Weinig PFA 17N, manufacturer: Michael Weinig KG, Tauberbischofsheim (Germany), model: PFA 17N, year of manufacture: 1971, machine number: 462-1717, 7 spindles (incl. universal spindle), spindle diameter: 40 mm, motor power approx. 3–5.5 kW per spindle, max. planing width approx. 170 mm, max. planing height approx. 120–140 mm, feed rate adjustable, weight approx. 3,500–4,000 kg. The machine is used and in age-appropriate condition. Dedpfx Afjxlacme Iocn

Condition: used, Year of construction: 2002, functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm Dodpfx Aoxk U Tkjf Iecn 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: excellent (used), Year of construction: 1994, Bäuerle surface planer Type: AS 510 Year: 1994 Dcsdpfjxgbw Isx Af Ion Cutter block: 3 knives Centrofix Planing width: 510 mm Motor power: 5.5 kW Auxiliary fence Fried cutter guard Control panel on top Digital display Infeed table: 1630 mm Outfeed table: 1220 mm Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, GUBISCH B230 – Four-Sided Planer Dsdpsxk Twzjfx Af Iscn For sale is a robust four-sided planer manufactured by GUBISCH, model B230, year of construction 1986. The machine operates flawlessly and is in excellent technical condition. — Technical Specifications • Machine type: Four-sided planer • Spindles: 4 units, each 7.5 kW with motor brake • Spindle diameter: 40 mm • Speed: 6,000 rpm • Tool diameter: 125 mm • Drive: Cardan shaft drive for the spindles • Planing width: up to 230 mm • Planing height: up to 140 mm • Feed motor: 1.5 kW, infinitely variable from 3.5 to 19 m/min • Feed roller diameter: 140 mm • Surfacing table length: 2,000 mm • Machine dimensions (L×W×H): 3,800 × 1,400 × 2,000 mm • Weight: approx. 2,900 kg — The machine has been tested and is in perfect technical condition. • Delivery by freight forwarding available upon request • Inspection possible at any time by appointment — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus VAT. Subject to change and errors.

Condition: used, KÖLLE HA 41 jointer planer Djdpfx Aexf Tqdjf Iscn Planing width approx. 410 mm 2-knife cutterhead

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Dodpfjw I Stdsx Af Iocn Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2000, Working width: 430 mm Total table length: 2850 mm Infeed table length: 1570 mm Table height: 1280 mm Cutter shaft diameter: 120 mm Speed: 500 rpm 4x planing knives Max. chip removal: 8 mm Tilting fence 0-45°: 1200 x 160 mm Motor: 3 kW Extraction hood diameter: 140 mm Weight: approx. 650 kg Dimensions: 2900 x 800 x 860 mm Storage location: supplier Dedpfx Afsw Sy Hms Ijcn

Condition: excellent (used), Leadermac LMC 423 S, four-sided planer - max planing width: 23cm - max planing height: 13cm - electric raising for feed beam with rollers - feed roller in table + pump with sliding fluid Dedpfx Aexixu Nof Iecn - chrome-hardened tables - complete set of spiral cutterheads - all spindles adjustable vertically and horizontally - bottom spindle 5.5 kW, right and left spindles via one 7.5 kW motor, top spindle 7.5 kW - all motors with brake - stepless feed speed adjustment Weight: 2,200 kg, machine length: 3.3 m. Machine in very good condition, ready for operation.

Condition: good (used), functionality: fully functional, BHM 55 Surface Planer Universal motor 220 Volt, 720 Watt 1.3 HP 55 mm planing width Dcedjxf H Rwspfx Af Isn Machine subject to differential taxation

Condition: used, Year of construction: 1998, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, working height: 120 mm, total width: 1,800 mm, total height: 1,900 mm, total length: 3,500 mm, overall weight: 3,000 kg, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, table length: 2,000 mm, number of spindles: 5, No. 04423 Four-sided planer WEINIG Profimat 23 E Automatic planer and moulder Used, year of construction 1998 5 spindles: bottom - right - left (mobile spindle) - top - bottom Automatic width adjustment WEINIG ATS positioning control Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle down: 5.5 kW, 40 mm, 6000 rpm Tool flight circle 125 - 145 mm, axial adjustment 5 mm Folding device, hardened table insert, mechanical brake 2nd spindle right: 7.5 kW, 40 mm, 6000 rpm Tool flight circle 15 mm below table level 100 - 200 mm, tool flight circle 40 mm below table level 100 - 180 mm, max. moulder depth 35 mm, axial adjustment travel 40 mm, mechanical brake 3rd spindle on the left (mobile spindle with ATS system): common motor with the 2nd spindle, 40 mm, 6000 rpm, tool flight circle 15 mm below table level 100 - 200 mm, tool flight circle 40 mm below table level 100 - 180 mm, max. moulder depth 35 mm, axial adjustment path 40 mm, mechanical brake 4. spindle top: 7.5 kW, 40 mm, 6000 rpm Tool flight circle 112 - 200 mm, max. Moulding depth 35 mm, axial adjustment range 40 mm Split pressure shoe in front of upper spindle, adjustable to tool flight circle and swiveling away from the tool, spring-loaded, mechanical brake 5th spindle below: 5.5 kW, 40 mm, 6000 rpm Tool flight circle 112 - 200 mm, max. moulder depth 15 mm, axial adjustment range 40 mm, mechanical brake All moulder spindles dynamically balanced for high concentricity Feed 3 kW, mechanical brake, infinitely variable 5 - 24 m/min Feed roller in front of 1st spindle pneumatically controlled high-low Adjustment travel of feed rollers in relation to left spindle, axial 35 mm Durofer steel rollers, diameter 140 mm Dcjdpjr Ddxysfx Af Ien Dressing table 2000 mm long Manual waxilite pump 1 driven roller in the outfeed table Lateral roller pressure in front of the left-hand spindle, moving and spring-mounted Pressure roller from above, telescopic spring-mounted Both axes of all spindles - with the exception of the 1st spindle - are equipped with mechanical digital displays Pressure shoe feed and discharge after the upper spindle with mechanical digital displays "DigiSet" (digital double display) for left and upper spindle (set tool radius - read wood dimensions) Mobile spindle (1 axis) automatic adjustment of the left vertical spindle to different workpiece widths Can also be used as a positioning spindle for 1 fixed dimension at a time Min. working height 12 mm Central position of lubrication points on the front of the machine Including 5 standard Centrolock 530 cutter heads Complete technical documentation Transport dimensions approx. 3500 x 1800 x 1900 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as-is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: like new (used), Year of construction: 2024, operating hours: 330 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor speed: 42 rpm, rotor diameter: 680 mm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Perfect shredder for green waste, waste, waste wood, plastic etc. Dcedpfx Ajvzribjf Ien

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 95 mm / 16 teeth -Tooth width: mm -Shaft: Ø 60 mm -Dimensions: see photos -Number: 14x gear shaft available -Price: per piece -Dimensions total: Ø 95 x 243 mm -Weight: 6.4 kg/piece Dsdpfx Asxf Dqbsf Iocn

Condition: used, Year of construction: 1978, functionality: fully functional, Planer type T 51 B, year of manufacture 1978, table length 2500 mm, working width 500 mm, table height 850 mm, maximum cutting/rebate depth 16 mm, hydraulic adjustment, cutterhead speed approx. 5000 rpm, 2-knife cutterhead, 4.8 kW motor, eddy current brake, jointer fence, auxiliary fence, weight approx. 950 kg. Machine subject to differential taxation. Dcsdpfsxf Hq Dex Af Ien

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm Dcodpexf A Niefx Af Isn -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available Dedpfx Asxf A Eqsf Iscn -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 246 mm / 80 teeth / Module 3 -Tooth width: mm -Shaft holder: inner Ø 25 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos Dsdpfx Aexf Anxef Ijcn -Quantity: 2x gear shaft available -Price: per piece -Dimensions total: Ø 246 x 40 mm -Weight: 4.0 kg/piece