Used Perforate for sale (902)

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Hnodpfxsz Sr Uyo Aitsu Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: excellent (used), functionality: fully functional, LIMAS AB / VEB L-1048 & Type 6-76 | Line for slicing (dicing), washing, and weighing vegetables Manufacturer: Limas AB / VEB Maschinenfabrik Bad Gottleuba Model / Type: L-1048 complete with VEB Type 60 drum washer Serial number: L-10-8-01 (slicer) 1204 (VEB washer) Year of manufacture: 2008 (Limas slicer) Power supply: 380 V, 50 Hz VEB washer: power 1.1 kW, protection rating IP44 Line composition: - Limas AB potato slicer (type: 6x76) Serial number: L-10-8-01 Year of manufacture: 2008 Plastic (mesh) belt Belt width 850 mm Scraper height 50 mm Distance between scrapers 90 mm Plastic roller width 720 mm Cutting system consisting of 6 knives Distance between knives 115 mm Overall dimensions: 3150 x 1550 x 2370 mm. - Belt conveyor Plastic belt Belt width 520 mm Overall dimensions: 2080 x 800 x 980 mm. - Vertical screw conveyor Lifting height 1600 mm Overall dimensions: 1900 x 750 x 2900 mm. - Mobile VEB drum washer Type: 60 Serial number: 1204 Power supply: 380 V, 50 Hz Power 1.1 kW Protection rating IP44 Drum width 470 mm Perforation diameter 10 mm Overall dimensions: 1250 x 1100 x 1790 mm. - Weighing system: - Belt elevator with scrapers Belt width 350 mm / 220 mm Scraper height 50 mm Distance between scrapers 90 mm Lifting height 1700 mm Hedpfoz Sfg Djx Aitsnu - Systec industrial scale (type: IT3). Dimensions: 770 x 440 x 520 mm. Overall system dimensions: 3200 x 1000 x 2130 mm. This technological line is a fully automated, synchronized sequence of machines designed for the comprehensive preparation, slicing (dicing), intensive washing, and precise weighing of root vegetables, with particular emphasis on potatoes. The system finds wide application in food processing plants, large commercial kitchens, and vegetable processing facilities of the "marktfrisch" type. The technological process begins with feeding the raw material onto an elevating belt and a precision rotary-knife slicer from Limas, which, thanks to its 6-knife arrangement, ensures perfectly even cutting. Subsequently, the product is transported via conveyors and a vertical screw conveyor to a mobile VEB drum washer, where effective removal of impurities takes place in the drum with 10 mm perforations. The final element of the line is an integrated weighing system, which feeds the raw material directly onto a Systec IT3-controlled scale, guaranteeing full portion control and repeatability of the production process.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual Hjdpfx Aezqvmrjitenu without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Year of construction: 2025, operating hours: 15 h, condition: like new (used), functionality: fully functional, input current: 230 A, machine/vehicle number: 202505, Absolutely like new! Demo unit (price incl. 19% VAT) - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Scope of delivery - Starter accessory set consisting of: - 1 × rectangular pan, smooth, 260 × 260 mm - 1 × round snack pan, Ø 190 mm - 1 × round snack pan, Ø 250 mm - 1 × tong for 50 bowls - 1 × turner, 360 mm - 1 × silicone tong, 260 mm Hnsdeyxy R Tepfx Aitou - Power cable Housing & design - Color: Red / Stainless steel Technical data - Dimensions (H × W × D): 420 × 540 × 500 mm - Power: 3,000 W - Weight: 29.5 kg - Connection: 230 V / 50 Hz / 16 A The speed oven is a compact high-performance unit for professional use in the catering industry. It is suitable for rapid cooking, baking, and heating of various dishes, designed for efficient workflows with high output. The speed oven features a non-stick coated cooking chamber and integrated exhaust air management. Thanks to TRIAC circuitry, the device allows for precise operation and consistent power regulation. Low odor, enables roasting characteristics without fat or oils ... Functionality - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Extensive accessories available, such as steak contact plates... (Source: Website Reamotion Delmenhorst)

Condition: good (used), Year of construction: 2010, machine/vehicle number: 2005, Automatic Perforating & Creasing machine Hedpfx Aijy Txkbotonu

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. Hnedpfx Aiszq Ekystsu - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination • Region-of-interest windowing for higher frame rates • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface Hedowbg Drspfx Aitjnu The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Hodpfxezn Ulbs Aitjnu Year of manufacture: 2018 Power: 30 kW Maximum speed: 2700 rpm Voltage: 3×400 V If you have any questions or require further information, please do not hesitate to contact us via message or phone. The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. The machine is located in 59823 Arnsberg.

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. Hnjdpjz I Dziefx Aitsu First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: excellent (used), A robust industrial machine of German manufacture, Walther Trowal, model DLT 4, year 1980. This device is designed for surface treatment of metal, aluminum, or plastic parts – the trowalizing process (deburring, edge rounding, polishing, cleaning). A classic drum design – reliable, massive, and durable, typical of “West Germany” production. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • The machine is complete, and the drum rotates smoothly and evenly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Requires electrical connection and possibly a service inspection. • Ideal for a tool shop, machining facility, or production line. Applications: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Processing screws, bushings, stamped parts, castings, and precision parts. Condition: used, solid, classic Walther Trowal design – requires minor refurbishment or is ready for immediate use. Hsdpfxez Slhue Aitjnu

Condition: reconditioned (used), machine/vehicle number: BM4933, BM4933 61 cm-width needle perforator / creasing machine stand model with front & back table foot pedal Hnsdpfxoh U Az Ds Aiteu perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Condition: used, Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Here, we offer a Pfeiffer DUO 65, two-stage, high-performance rotary vane pump. Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Two-stage, high-performance rotary vane pump with a pumping speed of up to 70 m3/h. With 3-phase motor. With temperature sensor (3TF) for optimal motor protection. Integrated gas ballast and HV safety valve. For all applications in the rough and fine vacuum range. Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A Hnedpfxezianqe Aitou Includes: ONF 35/65 oil mist separator, corrosion-resistant version. Mounts on the pump's exhaust port and prevents air pollution from oil mist. Type: PK Z40 150 Scope of delivery: (See picture) The unit comes from a warehouse clearance. We also offer express shipping (DHL, UPS, TNT). We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 Hsdewh Naispfx Aitjnu - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: Hnsdpfoyk Utxex Aitou - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Hnsdpfx Asz Iczueitsu Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: used, Year of construction: 2006, 32 x 65 cm - Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunctional finishing for creasing and cutting - Applications: Ideal for business cards, brochures, and other printed materials Hnsdpfx Aiewv D Hmsteu - Efficiency: Precise cutting and creasing for a fast and accurate workflow

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves Hsdpfxez Snbwo Aitjnu CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: used, Year of construction: 1980, machine/vehicle number: 14357, Perforations- und Rillmaschine - Perforation & Creasing machine Stewo K16/4Year ca. 1980 - Serial-No. 014357 Creasing width max. 700mm Hnodpfxjh Axkke Aitju Electric operation Paper 80-250g Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2003, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. Hedjztaa Iepfx Aitsnu The machine can be demonstrated while powered on.

Condition: used, Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: - Spindles: 10 - Spindle 1: Bottom / 7.5 kW / 50 mm - Spindle 2: Right / 7.5 kW / 50 mm - Spindle 3: Left / 7.5 kW / 50 mm - Spindle 4: Right / 7.5 kW / 50 mm - Spindle 5: Left / 7.5 kW / 50 mm - Spindle 6: Top / 11 kW / 50 mm - Spindle 7: Bottom / 7.5 kW / 50 mm - Spindle 8: Top / 7.5 kW / 50 mm - Spindle 9: Bottom / 7.5 kW / 50 mm - Spindle 10: Universal / 7.5 kW / 50 mm - Working width: 170 mm Hnedjz Da Dlopfx Aitsu - Working height: 120 mm - Feed rate: 60 m/min - Feed motor: 15 kW - Table: Hard-chromed

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Technical Specifications Paper Size: Width: 210–370 mm, Length: 210–670 mm (extendable up to 1,000 mm) Paper Weight: 110–350 g/m² (coated, uncoated, and laminated paper) Processing Capacity per Sheet: Up to 8 longitudinal cuts (6 standard, expandable to 8 with an additional module), 30 cross cuts, and 20 creases in a single pass Speed: 30 sheets per minute (A4, short-edge feeding, 2 cuts, 1 crease) Feeding and Stacking: Input tray capacity: 100 mm; Output stacker capacity: 140 mm Dimensions: 2,310 mm (W) × 1,005 mm (D) × 1,110 mm (H) – operating configuration Weight: 275 kg Connectivity: USB 2.0 with standard PC Controller software Hnsdpfx Aijz Rz D Ustju Product Description The Duplo DC-646 Slitter/Cutter/Creaser is a premium print finishing solution designed for medium- to high-volume digital print providers. Engineered to handle demanding production tasks with ease, it combines slitting, cutting, creasing, and optional perforating in a single pass, making it ideal for producing business cards, menus, brochures, and direct mail materials. The DC-646’s advanced feeding system ensures accurate and reliable paper handling, while its CCD camera and barcode reader automate job setup for seamless production. Its modular design allows for customization, including the use of rotary tools for creasing and micro-perforating, providing print service providers with the flexibility to meet various finishing requirements. With a processing speed of up to 30 sheets per minute, the DC-646 increases productivity while minimizing manual intervention. Equipped with PC Controller software and the ability to store an unlimited number of jobs, it enables quick job changeovers and consistently precise results, saving print service providers valuable time and resources while delivering professional-quality finished products.

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Hjdpfx Aisyg Ex Dstenu

Condition: refurbished (used), functionality: fully functional, This excellently maintained Agilent 1200 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The final maintenance and qualification were performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Hedozy Hldjpfx Aitonu Agilent 1200 Solvent Tray Agilent 1200 Vacuum Degasser G1322A Agilent 1200 Quaternary Pump G1311A Agilent 1200 Series Standard Autosampler G1329A Agilent 1200 Thermostatted Column Compartment G1316A with integrated switching valve Agilent 1200 Series Diode Array Detector (DAD) G1315B PC with Windows 10 Agilent ChemStation CDS software included 6-month warranty Enjoy 25% off your first service when you sign up for a maintenance contract with us.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Sealpac 800 | Automatic and high-performance tray sealer Manufacturer: SEALPAC GmbH Model: SEALPAC 800 Type designation: TVG 01 1031 01 Year of manufacture: 2004 Power supply: 3x 400/230 V, 50/60 Hz Connected power: max. 10 kW Compressed air consumption: 8 bar / 650 l/min Cooling water consumption: approx. 4–5 l/min Protection class: IP 65 Machine weight: approx. 2000 kg Overall dimensions: 8500 × 900 × 2000 mm Conveyor system and tooling: - Infeed and outfeed belts: Mesh/wire belts, working width: (2x) 220 mm - Formats / Tooling dimensions included: - Four-row tool: (4x) 220 × 160 mm - Three-row tool: (3x) 288 × 220 mm - Maximum tray depth: up to 200 mm Additional equipment (included): - Busch vacuum pump Type: 250-132 Serial number: 49167 Capacity: 250 m³/h Ultimate vacuum: 0.5 mbar Oil quantity: 6 liters (recommended type: SAE 30) - Accessories: Additional pallet with spare parts and format elements. Hnjdpoy T Su Tofx Aitju The SEALPAC 800 is a fully automatic, industrial sealing line designed for continuous operation in meat, poultry, fish processing plants, and ready-meal production facilities. The machine precisely forms a vacuum and applies a protective gas mixture (MAP / Modified Atmosphere Packaging technology), which significantly extends the freshness and shelf life of packaged food products. Thanks to its impressive frame length (8.5 m), the machine provides a long and convenient loading area for personnel or automatic dispensing machines. The machine features modern microprocessor control, low noise emission (approx. 73 dB), and a full stainless steel construction with IP 65 protection, which enables aggressive chemical and pressure washing after production. The included Swiss Busch pump with a capacity of 250 m³/h guarantees quick and stable achievement of a deep vacuum in the sealing chamber.

Condition: used, Year of construction: 1996, machine/vehicle number: 354-0, Item No. 25055 Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Right-hand / left-hand rotation - Quick-change drill chuck 1-13 Hedpfxez Erfwe Aitjnu - Lighting