Used Pallets for sale (6,441)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height Chsdpfx Asz Ipwcjfgec F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Chedpfx Ajz E Dagefgec Price negotiable. The entire system is being sold as a complete unit.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height Chodpfx Afoz Irr Ajgjc - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Csdpfsz Iqp Tox Afgjhc Illustration similar

Condition: used, functionality: fully functional, This pre-owned STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. Its modular high-bay design is ideal for logistics centers, industrial settings, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking solution offers efficient storage for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 5,040 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm, model PNB0472 - Beam color: yellow, painted - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue, painted - Levels: floor + 4 Cjdpfxsz Iw Sbe Afgehc - Pallet spaces: 270 including floor positions - Model: STOW, pre-owned SCOPE OF DELIVERY: - 19 x Frames (approx. 1,050 x 110 cm), pre-assembled - 144 x Beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x Safety pins Price: €6,960.00 net €8,282.40 gross An invoice with VAT shown separately will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our logistics partners – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer individually tailored to your requirements. Whether for new builds, modifications, or expansions – we offer expert advice on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive impression of our pallet racking, storage shelves, and other solutions. Many systems are set up and ready for you to experience directly. Our expert consultants are available to answer your questions and provide personalized advice – we look forward to your visit! Haven't found what you're looking for? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You will find our phone number on our company page ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min Chsdpez Iqtfefx Afgsc F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a high-quality, customer-specific robotic handling system from Wehling Anlagen- und Maschinenbau GmbH, manufactured in 2018. The system was originally developed for the automated processing of wooden pallets and large-format sheet materials and combines two work processes in one system: * automatic destacking of nested wooden pallets * automatic sorting and restacking of large-format sheets according to quality classes The core of the system is a powerful 6-axis Kawasaki BT200L industrial robot with an automatic tool changer. The system is ideally suited for applications in the wood, construction materials, sheet materials, and logistics industries, or as a basis for individual automation projects. Technical equipment: Manufacturer: Wehling Anlagen- und Maschinenbau GmbH Year of manufacture: 2018 Project No.: P113104 Kawasaki 6-axis industrial robot BT200L Robot payload: 200 kg Large working radius Siemens TP700 Comfort touch panel PLC control Main switch cabinet Automatic tool changer Pallet gripper Sheet suction gripper 4 pallet stations Automatic pallet recognition Paper dispenser for interleaving sheets Safety fence Safety light curtains Pneumatic system Possible applications: Pallet handling Pallet destacking Pallet turning Sheet sorting Order picking Material handling Csdpfx Afjziwpregjhc Automation of manufacturing processes Robotics projects Retrofitting of existing production systems Scope of delivery: Complete robotic system Kawasaki BT200L Robot controller Switch cabinet Siemens HMI Pallet gripper Sheet gripper Tool changer station Pallet stations Paper dispenser Safety fence Safety light curtains Documentation Operating manual Condition The system is in operation. The scope of delivery corresponds to the existing components. An inspection is possible by appointment. Special features: Special machine construction "Made in Germany" High-quality Kawasaki industrial robot Extensive documentation available Ideal basis for retrofit or automation projects Technical data: Feature Value Manufacturer Wehling Anlagen- und Maschinenbau GmbH Type Combined system pallet destacker / sheet sorting Year of manufacture 2018 Project P113104 Robot Kawasaki BT200L Payload 200 kg Control Siemens TP700 HMI / PLC Gripper Pallet gripper + sheet suction gripper Safety equipment Light curtains, protective fence

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. Chjdpfx Afjzvn Thjgoc For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact and high-performance heavy-duty shelving solution for industrial storage needs. The modular high-bay rack is ideally suited for logistics, industrial facilities, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 3,080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam color: yellow powder-coated - Uprights: approx. 520 x 110 cm, pre-assembled - Upright color: blue powder-coated - Levels: floor + 2 - Pallet spaces: 99 including floor spaces - Design: Used STOW model SCOPE OF DELIVERY: - 12 x upright frames (approx. 520 x 110 cm), pre-assembled - 44 x beams (approx. 270 x 12 x 5 cm), PNB0472 - 88 x locking pins Cjdpsz Ip D Nefx Afgohc Price : €2,768.00 net €3,293.92 gross You will receive an invoice with VAT stated separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany through our partner freight forwarders – shipping costs depend on your postcode - Professional assembly and disassembly by our trained teams available on request - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your requirements. Whether for new installations, modifications or extensions – we offer expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive overview of our pallet racking, storage racking, and other solutions. Many systems are assembled and can be experienced directly. Our specialists are at your service for questions and individual consultations – we look forward to seeing you! Still haven't found the right solution? Visit our website for a quick overview of many product offers and variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL Csdpfjz Ipclox Afgohc 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1279895, overall weight: 47 kg, J. Schmalz vacuum layer gripper / palletizing gripper SPZ-800X800-3R36 For sale is a vacuum layer gripper from J. Schmalz GmbH, designed for use in automated handling, palletizing, and depalletizing systems. The gripper is suitable for integration into robot or automation systems and is equipped with the corresponding vacuum/valve technology and sensors. Technical data according to the nameplate: - Manufacturer: J. Schmalz GmbH - Type: SPZ-800X800-3R36 - Article number: 10.01.22.03223/0 - Serial number: 1279895 - Year of manufacture: 02/2017 - Weight: 46.50 kg - Dimensions of the gripping system according to the type designation: approx. 800 × 800 mm The gripper comes from an industrial plant and is in used condition. Scope of delivery and design as shown in the pictures. Inspection possible by arrangement. Note: Technical data has been taken from the nameplate or existing labeling. For further technical details, we recommend checking the article number with the manufacturer. Chjdpfx Afez Ea A Rjgoc

Condition: used, functionality: fully functional, This used STOW pallet rack is a compact, high-performance heavy-duty racking system designed to meet industrial warehousing demands. The modular high bay racking is ideally suited for logistics centers, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load of up to 9,000 kg, this immediately available pallet racking system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam color: yellow powder-coated - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue powder-coated Csdpfxoz Ip D Aj Afgjhc - Levels: Floor + 4 - Pallet positions: 75 including positions at floor level - Version: Used STOW system SCOPE OF DELIVERY: - 06 x frames (approx. 1,050 x 110 cm), pre-assembled - 40 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 80 x safety clips Price: €2,080.00 net €2,475.20 gross An invoice with VAT shown will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carriers – freight costs depend on your postal code - Professional assembly and dismantling by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers possible PLANNING & CONSULTING: Our planning department will be happy to prepare a tailored, no-obligation offer according to your requirements. Whether for new builds, conversions, or expansions – we provide expert advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! Here you can get a comprehensive impression of our pallet racks, storage racks, and additional solutions. Many systems are on display and ready for hands-on inspection. Our expert advisors are available for your questions and personal consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Please contact us via message or phone call. You’ll find our phone number on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will call you back as soon as possible.

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PalettenherstellungsmaschineTyp Weimer, Pallet manufacturing machine/pallet production line - Type WEIMER Availability: Immediately Dismantling/loading: To be arranged For sale: a complete, fully functional WEIMER pallet manufacturing machine. The system has a flexible and modular design and is in technically perfect condition. System scope: Stringer machine Turner Deck board machine Assembly machine Stringer milling machines Corner saw / cutting station Chsdpfsz Eiy Esx Afgjc Stacking machine Turner Package lifting platforms The system has been regularly and annually serviced by the manufacturer. A large stock of spare parts is available and can be purchased optionally together with the system. The complete production line can be inspected upon request. Further technical data, documents and information about the system are available upon request.

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Cjdpsz Iwwdefx Afgehc Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 397

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. The production line is ideal for manufacturing products such as paper and paperboard pallets—or other pallets—where fast setup changes are crucial for competitiveness and efficiency. Facts about the line - Deck nailing unit - Leg nailing unit - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 Chjdsy Exvnspfx Afgsc The pallet line has been dismantled and thoroughly documented. It is currently stored in Southern Finland. The company that dismantled and documented the line is available for on-site reassembly if needed.The line will be sold as a single wholeness.

Condition: excellent (used), Year of construction: 2006, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, total height: 140 mm, color: other, GVW: 160 kg Lifting capacity: 5.000 kg Csdpfxjz E N R Do Afgehc 5000 kg hand pallet truck! original paint, steel wheels

Condition: like new (used), Year of construction: 2019, operating hours: 884 h, load capacity: 1,600 kg, fuel type: electric, mileage: 884 km, JUST ARRIVED Electric pallet truck Brand: Still (Germany) Chedpfx Asz Hxvlsfgsc Year of manufacture: 2019 884 operating hours Capacity: 1,600 kg Battery with charger included.

Condition: used, Year of construction: 2007, Overview Robotic end-of-line palletizing system from a wine bottling plant, consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack the packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. The system is still installed in Belgium and can be viewed by appointment. Technical data - Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller - Gripper clearance: 1,200 x 240 mm - Pallet size handled by the destacker: 1,100 x 1,200 mm - Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm - Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm - Film: pre-stretched LLDPE, pre-stretch levels 160 %, 230 % and 260 %, ring rotation 18 rpm - Wrapper connection: 3 x 400 V, 50 Hz; compressed air 6 bar Scope of Delivery - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm, plus a spare gripper on a steel frame (1,340 x 610 x 640 mm) - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm - Pallet destacker | steel roller conveyor, roller width 1,050 mm, 6,200 x 2,500 x 2,550 mm, with steel infeed frame 3,000 x 1,500 x 2,100 mm - Stretch wrapper | Strapex | SWR 30 | rotating ring, 2,830 x 1,810 x 3,520 mm Chodoz Hvu Sepfx Afgec - Chain conveyor | 3 chains, chain width 1,120 mm, 8,300 x 1,650 x 620 mm - Safety fencing | 10,000 x 10,600 x 2,310 mm Condition Used, still installed. Viewing possible by appointment. Availability Immediately available.

Condition: used, SolidHub Electric High-Lift Pallet Truck This electric high-lift pallet truck has only 76.3 operating hours. It features a maximum lifting height of 4,000 mm, a load capacity of 1,200 kg, and a foldable operator platform with side protection bars. This electric high-lift pallet truck is particularly suitable for: • Warehouses and logistics • Order picking • Loading and unloading • Internal transport of pallets • Storage and retrieval in pallet racking systems Technical specifications: • Manufacturer: SolidHub • Model: CDD12-030 • Load capacity: 1200 kg • Lifting height: 4000 mm (4 meters) • Load center: 600 mm • Fork width: 550 mm • Fork length: 1150 mm • Recommended battery capacity: 210 Ah • Weight without battery: 978 kg • Serial number: 080127N1700 • Operating hours: 76.3 h Equipment: • Electric lifting and drive system • Foldable operator platform • Side protection bars Cjdpsz Hx Izefx Afgshc • Ergonomic tiller control • Electric lifting and lowering function • Battery charge level indicator • Emergency stop switch New price: €7,860 gross

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 10,806 h, load capacity: 8,000 kg, lifting height: 6,000 mm, Forklift in very good condition. Load capacity: 8,000 kg. Lifting height: 6,000 cm. Csdpfxeyknlzo Afgehc

Condition: ready for operation (used), This pre-owned Jungheinrich Esmena pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial storage requirements. The modular high-bay racking is ideally suited for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow, painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 2 - Pallet positions: 162 incl. floor positions - Version: Used Jungheinrich Esmena DELIVERY SCOPE: - 019 x uprights (approx. 400 x 105 cm), pre-assembled - 072 x beams (approx. 270 cm) - 144 x locking pins Price: €3,530.00 net €4,200.70 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - We can also inspect existing heavy-duty racks from other manufacturers PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether it's a new installation, modification, or expansion – we provide professional advice for your racking configuration. SHOWROOM: Chedsz Iw E Iepfx Afgoc Feel free to visit us in our showroom! On-site, you can get a comprehensive view of our pallet racking, storage racks, and other solutions. Many systems are assembled and available for direct inspection. Our experts are happy to assist you with questions and personalized advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2008, condition: good (used), functionality: fully functional, Pallet wrapper FILMA FP10 CP260 used, from site closure Year of manufacture: 10-2008 Maximum load: 1500 kg Codpfx Aozu Nb Refgjhc Turntable diameter: 1.5 m with access ramp Price net plus VAT, free loading onto truck Transport dimensions: 2.42 x 1.50 x 0.80 m

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option Csdpjz Iw Enofx Afgehc - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Chodpoz Dnu Ejfx Afgoc Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Cjdoykrtpjpfx Afgshc Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.