Used Laminate Trimmer for sale (1,062)

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table Lsdpfx Aodun Nisffjak

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 11/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust gas concept, EU6 AR * Trailer hitch, rigid (incl. towing bar) * One towing eye at the front * Airbag for driver and front passenger with passenger airbag deactivation * Roof gallery with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Outside mirrors, electrically adjustable, heated and foldable * Outside mirrors left & right, convex, with integrated LED indicator light and wide angle range * Front-wheel drive * Emergency brake assistant (for adaptive cruise control ACC up to 160 km/h) * Battery 520 A (92 Ah) * Rubber floor in the driver's cab * Tailgate/rear doors covered * Electronic stabilization program (ESP) and ABS with electr. Differential lock * Operating voltage 12 V * CO2-optimized version with stone chip protection * Rear step, over half the width * Operating permit supplement C42 * Electronic immobilizer * Front and rear parking sensors and side protection assistant * Entry handles on the rear pillars * USB dual-function module 45W * Daytime running lights with driving light switch (automatic), "leaving home" and manual "coming home" function * Panel van Plus * Premium interior noise reduction measures * 4th self-engine 2.0L Agg. 03N.G * Adaptive cruise control (ACC) with speed limiter and stop function * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Plastic entry handle on the B-pillar in the passenger compartment * Climatic air conditioning in the driver's cab * LED headlights with LED daytime running lights * 2 standard interior lights in the passenger/cargo area * Child safety lock in the passenger compartment * Standard climate zones * Rear view camera "Rear View" * Multifunction steering wheel (3 spokes) * 4 speakers: 2 tweeters, 2 woofers * Multifunction display "Plus" * Fatigue detection * Wired & Wireless App-Connect * Body engine 2.0 l/130 KW (4V) BIT, Common Rail basic engine is: TK1/TK4 * Navigation device standard with media and internet package * Fog lights including cornering lights * Online service, with OCU, with head unit coding, without WFS network * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * MAN Media Van Business * 12 V socket and 2 cup holders in the instrument panel * All-season tires * Long wheelbase 4,490 mm * Three-point automatic seat belts with belt height adjustment and electric. Belt tensioners at the front * Rear wing doors with increased opening angle * Side windows at the front and rear and rear windows in heat-insulating glass, darkened from the B-pillar (privacy) * 12 V sockets in the driver's cab * "ergoComfort" suspension seat on the left * "Comfort" seat on the right * Belt control, E-contact in the belt buckle, extended safety equipment * Seat covers in "Toronto Grid" fabric * Seat heating, adjustable running * Side marker lights * Approved as 3.5t * Start-stop system with brake energy recovery Laodpfx Afex Ipfljfjk * Lane change assistant with active lane keeping assistant * Crosswind assistant * Windscreen wiper interval control with light and rain sensor * Central locking with radio remote control and interior operation * Digital radio reception (DAB+) * Front axle, reinforced (2,100 kg load capacity) * Lashing eyes for securing loads * Laminated glass windscreen in Heat-insulating glazing, heatable * Permissible total weight 3,500 kg * Additional water heating, programmable, with radio remote control * 2nd heat exchanger (under the right seat box) * App

Condition: used, Year of construction: 2013, The Duplo Bookletmaker System 5000/4000 is a sophisticated and highly efficient finishing solution, designed to streamline booklet production with precision and reliability. Manufactured in 2013 and currently operational in a German printshop, this system is built to handle sheets up to 350 x 500 mm, making it ideal for a wide range of booklet and brochure formats. The system is comprised of two Collorator towers, each featuring 10 compartments (DBM 4000), ensuring smooth and organized sheet collation. It also includes a delivery/offset stacker (DBM 4000) for neat output stacking, and a stitching and folding unit (DBM 5000) for professional booklet assembly. A dedicated pressing plant (DBM 5000) guarantees crisp, flat results, while the integrated trimmer (DBM 5000)???equipped with new blades and updated controls???delivers clean, precise cuts every time. Ledpfxexphybo Affoak Enhancing operational flexibility, the system features an adjustable kicker/display for customizable interval settings. The DBM 4000 components were built in 2007, while the DBM 5000 units were added in 2013. With each tower boasting 4 million cycles and the trimmer at 2.5 million, this system has proven its durability and performance. Regular maintenance by FKS Hamburg ensures the machine remains in top working condition, ready to meet the demands of high-volume production environments. Format: 350 x 500 mm Equipment: 2 Collorator towers with 10 compartments DBM 4000 1 piece delivery/offset delivery Stacker DBM 4000 1 piece stitching and folding unit DBM 5000 Duplo 1 piece pressing plant DBM 5000 Duplo 1 x Trimmer DBM 5000 Duplo (New blades/new control) 1 piece Kicker/display adjustable the interwalle D System DBM 4000 built in 2007, System 5000 built i Towers 4 million each, trimmers 2.5 million Maintenance by FKS Hamburg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Automatic capper for PVC, polylaminate, tin and champagne capsules, suitable for bottling plants with medium to high production capacities. Frame completely covered with stainless steel sheet, automatic dispenser for capsules Lsdpohx D Duefx Affoak

Condition: excellent (used), For sale: Robust bookbinding press from the Swiss brand Jos. Hunkeler AG, type FNP, equipped with a Mecman pneumatic cylinder Ø160 mm, stroke 50 mm, working pressure up to 8 bar. • Manufactured in Switzerland – top-quality workmanship • Cylinder: MECMAN (Sweden), Ø160 mm, 50 mm stroke, max 8 bar • Flat working plate, ideal for bookbinding, gluing, and laminating tasks • Stable, heavy construction on castors • Integrated pressure gauge for monitoring • Lower cabinet with control panel and pneumatic supply • Serial number: 13109 The machine is in perfect working order, excellent for production, manual pressing of covers, or stationery equipment. Ljdpfoud Avrex Affeak Visual and technical condition – very good. Ready for operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, SPS VITESSA CLASSIC G2 COATING MACHINE TYPE : CLASSIC G2 SIZE : 74 x 104 cm DETAILS Ledpfsvy Haxex Affeak Automatic Spot Coating Machine, Max Sheet Size 74 X 104cm, Min sheet 32 x 45cm, Automatic Pile Suction Feeder Very Good Condition Immediately Available

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Lajdpfod Rcigjx Affek Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Lodpfx Afecr U Ursfjak Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Laedpfx Aoflc Uhsffok Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Lsdpfx Afsgbug Nsfoak In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Lajdpfxjd Nuu Hs Affek Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone Lasdpowd Tcaofx Affjk 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) Ljdpfxoinigme Affjak recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Mod. TFU200/L/30/12/S

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Lajdsm Udfwepfx Affsk Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Laodeidqphjpfx Affjk Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: Lodonzhxqjpfx Affsak A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER - Min/max edges (band) thickness in rolls mm 0,3 - 3 - Min/ max panels thickness mm 12 - 40 - Min /max working width mm 250 - 2500 - Numerical Control: Power Control PC 22 Lodpfewk Hp Tjx Affoak - Feeding speed (adjustable) m/min 10 - 32 - Top motorized pressure belt - Anti-sticking liquid spraying unit - Pre-Milling Unit (Vertical joint trimmers) 2 x Kw 4 at 9.000 RpM - Glueing Unit (Hot Melt + Quick Melt system): A3 - Pressure Zone (manual adjustment): "A" - Edge coils supporting unit with N. 2 coils - Snipping Unit: HL 84 (2 x Kw 0,22 at 12.000 RpM) - Fine Trimming Unit (2 x Kw 0,4 at 12.000 RpM) - Finish processing unit (Glue scraper + Buffing unit): FA 11 - Spraying & polishing unit

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Lsdpfer Ttflox Affoak Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617 (2 x Kw 0,25) Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Lsdpfxokt Uuaj Affjak Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Ljdjuhv R Depfx Affsak Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Lasdpfx Asi Hn Sroffok Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Laodpoltmnlofx Affek Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Ljdpfx Afod Nt N Hsfjak Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Lasdpfeifnzdsx Affek Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Lasdol Iz Tujpfx Affsk Numerical Control NC21 Feeding speed m/min 18 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10