Used Kreissaege Sawmill for sale (832)

Year of construction: 1997, condition: good (used), LINCK V 18 edger. LINCK V 18 edger including take-off unit. Machine in good condition including 2 x 85 kW drive motors (original LINCK!) and 2 x 2.2 kW drive power for take-off. Year of manufacture 1997, long knife discs for feed up to max. 75 m/min, max. cutting depth 110 mm. Weight 5,300 kg. Ihsdpfx Ahjxca Hme Net

Condition: reconditioned (used), very robust resaw for sawmill use available immediate guided sawblades on multi tooth shaft including casting device for blade guides several sawblades max cutting hight: 250 mm max cutting width: about 500 mm Ihodpfoiiiamsx Ah Not

Year of construction: 2010, condition: like new (used), functionality: fully functional, As-new EWD bandsaw stand, tiltable by 17° (can be used both as a block bandsaw and as a resaw!). Corresponds to the current model!! Roller diameter 1800 mm. In absolutely as-new condition, year of manufacture 2010. 90 kW drive power, with adjustable band guide. Includes hydraulic system and control panel. Complete documentation available. Isdpfexcbb Esx Ah Njht

Condition: good (used), Belt separator LINCK SE with extraction unit type AVS. Very good condition after complete refurbishment! Length 7.0 m Ihodpfx Aoxcbdgjh Njt

Year of construction: 2000, condition: good (used), EWD Combimes edging line. Year of manufacture: 2000, type DK90-TL. Timber feed from the left. Maximum edging width 500 mm, maximum edging thickness 120 mm. 90 kW drive motor. Cycle rate with 4.0 m wood length approx. 18 pieces/min. Complete with original EWD control system. Delivery from the accumulation conveyor before singling through to the sliver separator included. The line is complete and in good condition. Iodpfxoxcwvxj Ah Noht

Condition: used, functionality: unexamined, USNR model turning device. Complete Ihodpfx Aexcbicjh Njt

Year of construction: 1995, condition: refurbished (used), Trimming saw – edging saw MEM Cobra Year of manufacture: approx. 1995 Max. cutting height: 120 mm, max. pass-through width: 1,070 mm. 4 variable axes. 2 x 55 kW saw drive power. Completely overhauled machine! System immediately available for takeover! Ihodpfsxcp A Djx Ah Not

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Iodpfoxt Uvqsx Ah Neht

Year of construction: 2004, condition: good (used), functionality: fully functional, B&Z Root End Reducer Type WRP SO Well-maintained, fully functional root end/log thickness reducer made by Baljer and Zembrod. Built in 2004. Complete with control system, scraper conveyor (straight and ascending). Includes log ejector. Complete steel substructure. Milling shaft length 1,380 mm. Milling shaft drive with 75 kW motor. Feed motor for slewing gear. Ihedjwavymepfx Ah Net

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Ihsdpfx Ajyaqbqjh Nst Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Year of construction: 2007, condition: used, Industrial drying chamber Mühlböck Type OLSF2125-3110-1100-11-000C for controlled technical drying of sawn timber or for rapid drying of firewood. The system enables uniform, low-stress wood moisture reduction through precisely controlled climate and air management. Ideal for sawmills and industrial wood processing with high quality requirements. Isdpfxox Trqho Ah Noht heating capacity: 260 kW Water temperature: 90 ° C Amount of water: 10 m³/h content: 86.6 m³ gross

Year of construction: 2022, condition: used, Belt conveyor ca.12 m kicker Kickers mowed with 1 piece hydraulic cylinder Motor 2.2 kW Ijdstpg Ikjpfx Ah Noht

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm Ihodpex Hhxhjfx Ah Not - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Ihodpfx Ahevuhume Not Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Ihsdpfxsyam Iao Ah Net Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Year of construction: 1992, condition: good (used), Machining for cut-off band saw in concentricity Iodpfx Asfd Ibvjh Noht

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions Ihsdjx S Sk Eopfx Ah Nst • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Iedpfxjyabltj Ah Neht

Condition: used, Stretch wrapper Ihedpfx Ahsyaar So Nst

Condition: used, Compressor Manufacturer: Atlas Copco Ihodpfx Ahsyaak Ie Nst Model: GX7 Hours used: 580 h

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Ihsdex U Tfpepfx Ah Njt

Condition: good (used), Full line, semiautomatic, finished material 40–160 mm Iedsx U Ealjpfx Ah Nsht

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Iodpfx Ahsx Edrrs Njht Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Ihjdpjx Uw Emefx Ah Nst Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Year of construction: 2026, condition: new, functionality: fully functional, Technical details: for band saw blades up to 206 mm wide Pressure measurement in bar Positioning through blade displacement Technical details: Blade width: bandsaw blades 30 - 206 mm Blade thickness: 0.6 - 2.4 mm Blade length: 4,000 - 11,000 mm Working speed: 4 - 20 m/min. Rated voltage: 3AC x 400V, direction of rotation "right" Frequency converter adjustable in steps Exact hydraulic pressure difference readable via pressure gauge Adjustable pressure lever Ihjdpfx Aox Uw Eajh Net Levelling roller incl. Anvil for repairing dents