Used Insect Killer for sale (25)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAREL Automatic Killer K-15 Automatic poultry slaughter system from the renowned Marel brand – an Automatic Killer device designed for efficient and humane slaughter in poultry processing plants. The offered device is a component of a slaughter line, ensuring precise and repeatable operation while maintaining the highest standards of animal welfare and production hygiene. The system is designed for continuous operation in high-capacity plants. Key features and benefits: - High efficiency and operational reliability - Process automation – reduces manual labor - Precise operation for consistent process results - Stainless steel construction – easy to clean - Compliant with sanitary and industrial standards - Can be integrated with an existing MAREL processing line Technical condition: Godpfx Akoyzglcjyskc Used – very good – immediately ready for operation Technical data: - Manufacturer: Marel - Model: Automatic Killer K-15 - Type: 3768196 - Capacity: up to 15,000 bph - Year of production: 2011 Installation and commissioning support available. Please contact us for detailed information and to receive a customised quotation tailored to your facility’s requirements. We offer a wide range of related equipment. MAREL / STORK / STUNNER / AUTOMATIC KILLER / K-15

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. The machine has been replaced in our facility with a new double miter saw with continuously adjustable swivel angles and has always functioned well up to now. Key specifications: • Type: DS 130 BC • Serial number: 09438 Gjdpfxez Ag Ecs Akyjkc • Year of manufacture: 09/11 • Swivel angle: 45° (inward) and 90° (left and right saw heads independently) • Saw blades: d 500x4x80mm, Z=126 • Clamps: 2 vertical clamps, 4 horizontal clamps • Current application: Cutting aluminum extrusions (insect screen mesh) • X-axis: both saw heads move outward from the center • Cutting length: Maximum: 3600mm, Minimum: 300mm (with center stop) If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. Gkjdpfx Ajytrdtokyec 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: excellent (used), Year of construction: 2007, Laboratory foam dispensing station with foam mixer and applicator The system works similarly to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Formulations are stored in the control unit and can be adjusted during operation. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products + water • 5 dosing pumps • Direct inlet for the mixture • Product monitoring of the chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For one-piece carpets up to 1 m wide Application areas Stain protection agents Dirt, water, and oil repellent agents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and insect repellents Pile stabilizers Agents against hair loss Resins for wrinkle prevention and dimensional stability Specification Foam density: 20–100 g/l (higher density at lower flow rate) Dosing range: 0.5–500 g/l (1:100 per pump) Foam volume: 50–500 l/min Electrical data Connection power: 6 kVA, 10 A Mains voltage: 400 V / 50 Hz Control voltage: 24 V Dimensions: Gjdpfxeu D E A Ds Akyjkc H × W × D = 1400 × 2100 × 860 mm Year of manufacture: 2007 Purchase price: €47,600 You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Gedpfx Akeyu Svljyjkc Used item as shown in the pictures. Please contact us if you have any questions.

Condition: used, mileage: 1 km, first registration: 08/2011, empty load weight: 1,200 kg, maximum load weight: 2,300 kg, overall weight: 3,500 kg, color: silver, gearing type: mechanical, suspension: other, total length: 8,350 mm, Tilting/hinged roof window, insect protection door, roadworthy, new vehicle inspection (HU/AU), vehicle length 8,350 mm, vehicle width 2,470 mm, vehicle height 2,720 mm, Airstream Land Yacht Overlander Catering + Food Trailer, kitchen conversion, serving hatch, working area, sink, cabinets, shelves, hot water, wastewater, combi steamer, 220/400 volt connection, industrial dishwasher, refrigerator, walk-in cold room/freezer room, cold room/freezer room Thermo King up to minus 20 degrees, deep freeze function, sockets throughout interior, multiple windows, entrance door with fly screen, marker lights, roof hatches, fresh water tank, waste water tank, instantaneous water heater, 2 x 140Ah 12V AfM batteries. Gjdpfx Akjwyfduoyskc

Condition: used, mileage: 1 km, first registration: 07/1973, empty load weight: 2,030 kg, maximum load weight: 1,470 kg, overall weight: 3,500 kg, color: silver, gearing type: mechanical, suspension: other, total length: 9,800 mm, Tilting/hinged roof window, insect screen door, roadworthy, new general inspection/emissions inspection, vehicle length 9,800 mm, vehicle width 2,420 mm, vehicle height 2,800 mm. Airstream Land Yacht Excella 500 Catering + Food Trailer. Professional kitchen conversion with serving hatch, work area, sink, cupboards, shelves, hot water, wastewater system, combi steamer, 220/400 volt connection, industrial dishwasher, refrigerator, walk-in chiller/freezer cell, Thermo King chiller/freezer function down to minus 20°C. Power sockets throughout the interior, various windows, entrance door with fly screen, marker lights, roof hatches, fresh water tank, waste water tank, instantaneous water heater, two 140Ah 12V AfM batteries. Gkedowzbldspfx Akyoc

Condition: used, mileage: 1 km, first registration: 07/1968, empty load weight: 1,900 kg, maximum load weight: 1,250 kg, overall weight: 3,150 kg, color: silver, gearing type: mechanical, suspension: other, total length: 10,000 mm, Lift/tilt roof window, insect protection door, roadworthy, new general inspection/emissions test, vehicle length 10,000 mm, vehicle width 2,450 mm, vehicle height 2,800 mm, Airstream Land Yacht Sovereign Catering + Food Trailer, kitchen fittings, serving hatch, work area, sink, cabinets, shelves, hot water, wastewater, combi steamer, 220/400 volt connection, industrial dishwasher, refrigerator, walk-in cold storage/freezer cell, cold storage/freezer cell with Thermo King down to minus 20°C deep-freeze function, sockets throughout the interior, various windows, entrance door with fly screen, marker lights, roof hatches, fresh water tank, waste water tank, instantaneous water heater, 2x 140Ah 12V auxiliary batteries. Gksdpfxewzu H Us Akysc

Condition: used, mileage: 20,000 km, power: 390 kW (530.25 HP), first registration: 06/2026, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, Equipment: airbag, central locking, cruise control, navigation system, power assisted steering, seat heater, soot filter, F2X GigaSpace, 0__ Navigation system, V1A Actros, M8B Air intake mounted behind the cab, M7T Regulated water pump, M7I Insect screen in front of the cooling system, M5V High Performance Engine Brake, G5B Twin-plate clutch, G5G Mercedes PowerShift 3, Z5M Single PTO, Z5S PTO pump mounted below the upper edge of the frame, K5M Lockable fuel tanks, F4H Cab rear wall without window, F3Y Electrically-hydraulically operated cab tilting mechanism, F6D Tinted windshield with band filter, F8V Light sensor, F8W Rain sensor, D8M Electric sliding/lift-up sunroof, glass version, F7T Door extension, F5L Transparent exterior sun visor, F6R Air horns on the cab roof, F8B 2 remote control keys, F8E Central locking system, F8F Comfort locking system, F8H 2 additional remote control keys, D0Z SoloStar Concept, D1D Driver's air-suspended seat with climate control, D2K Massage function for driver's seat, D2N Seat back release for driver's seat, D3K Seat cover, Dinamica star, black, driver's seat, D3L Seat cover, Dinamica star, black, passenger seat, D3A Comfort upper bunk, wide, adjustable in height, D3M Mattress, PremiumComfort, lower bunk, D3N Mattress, PremiumComfort, upper bunk, D0A Leather steering wheel, S3A Airbag, driver, D4S One-piece electric sun blind for windshield, D4T Curtain across the bed(s), D4Z Sun blind, side, driver and passenger side, 218 Rear view camera, J2J Sound system, J2Z CB radio, L1C LED daytime running lights, L9C Preparation for additional headlights on the roof, L1P LED rear lights, S1D Stability control assistant, S1F, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Further:!! Leasing/financing and trade-in options are available!! !! !! - Errors and prior sale excepted!! - All information without guarantee ... more on our website. Godpfx Akjzrnbqsyjkc

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Gkjdoxl Dy Njpfx Akyec Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, mileage: 83,494 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width: 2.30 m * Cab roof height: 600 mm * ClassicSpace interior * Driver's air-suspended comfort seat * Co-driver's functional seat * Seat upholstery: velour (driver + co-driver + middle seat) * Side roller blinds (driver & co-driver) * Air conditioning * Roof hatch / ventilation flap * Storage compartment cover, driver and co-driver side * A-pillar trim * Tinted windshield * Interior color: greige/anthracite * Smoker's package * Compressed air connection in the cab * Instrument cluster: 10.4 cm * Classic cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking ----2. Engine & Drivetrain * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Two-plate clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the radiator * Underride protection under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO rear, hydraulic pump ISO 7653D * Auxiliary drive (PTO) ----3. Chassis, Axles & Frame * 8x8/4 all-wheel drive * Front axle: 9 t, straight design * Rear axles: 16 t, crown wheel 300, planetary gears * Front spring: 2x9 t, 4-leaf * 2nd axle steered * Rear spring: 2x16 t * Front axle stabilizer * Stabilizer under the frame, rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Mudguards for chassis transport * Rear underride guard omitted (ECE) * Central lubrication system ----4. Brakes & Safety * Drum brakes, front & rear * Electronic Braking System (EBS) 4th generation * ABS can be deactivated * Parking brake: electronic * Reverse warning * Speed limiter: 80 km/h Gkedpfx Ajym Iy Rjkyjc * Cruise control ----5. Electrical System & Electronics * Batteries: 2x12 V / 170 Ah (Exide) * 12 V / 15 A connection * 24 V / 15 A socket in co-driver's footwell * Truck Data Center 7 (FB Card) * FleetBoard Manager App pre-installation * PSM 2nd generation ----6. Tanks & Fluids * Main tank: 330 l aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ----7. Tires & Rims * Front axles: 385/65 R22.5 on 11.75x22.5 steep-shoulder rims * Rear axles: 315/80 R22.5 on 9.00x22.5 reinforced rims * 2 wheel chocks ----8. Exterior & Body * Bumper: steel (corners) * Bumper center section with towing eyes & coupling * Cab access: movable, left/right * Mirror housing: construction vehicle design * Sun visor: transparent, exterior * Exterior storage compartment flap: left * Construction site filter * Mounting parts for tipper body * Space for control unit between driver's seat & door pocket ----* Tire dimension VA: 385/65R22.5 * Tire dimension HA: 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical gross weight: 48000 kg * Tare weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ----We currently have 3 units available. Vehicle number: 11837, 11835, 11836 Errors and prior sale are reserved. Advertisements and various lettering have been digitally removed. We would be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional charge: In-part exchange of your

Condition: used, mileage: 41,863 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior* * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width: 2.30 m * Cab: 600 mm roof height * ClassicSpace interior * Driver's air-suspended comfort seat * Co-driver's functional seat * Seat upholstery: velour (driver + co-driver + center seat) * Side roller blinds (driver & co-driver) * Air conditioning * Roof hatch / ventilation flap * Storage compartment lids on driver and co-driver sides * A-pillar trim * Tinted windshield * Interior color: Greige/Anthracite * Smoker's package * Compressed air connection in the cab * Combination instrument: 10.4 cm * Classic Cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking ---- 2. Engine & Drivetrain* * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Twin-plate clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the cooling system * Underride guard under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO at the rear, hydraulic pump ISO 7653D Gjdpjym Iydsfx Akyokc * Auxiliary PTO ---- 3. Chassis, Axles & Frame* * 8x8/4 all-wheel drive * Front axle: 9 t, straight version * Rear axles: 16 t, crown wheel 300, planetary gears * Front suspension: 2 x 9 t, 4 leaves * 2nd axle: steered * Rear suspension: 2 x 16 t * Stabilizer bar on front axle * Stabilizer bar under frame at the rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Fender for chassis transport * Rear underrun protection omitted (ECE) * Central lubrication system ---- 4. Brakes & Safety* * Drum brakes front & rear * Electronic Braking System (EBS) 4th generation * ABS switchable * Parking brake: electronic * Reversing warning * Speed limiter: 80 km/h * Cruise control ---- 5. Electrical System & Electronics * Batteries: 2 x 12 V / 170 Ah (Exide) * 12 V / 15 A connection socket * 24 V / 15 A socket in the co-driver's footwell * Truck Data Center 7 (FB Card) * Pre-installation for FleetBoard Manager App * PSM 2nd generation ---- 6. Tanks & Fluids* * Main tank: 330 l aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ---- 7. Tires & Rims* * Front axles: 385/65 R22.5 on 11.75 x 22.5 steep-shoulder rims * Rear axles: 315/80 R22.5 on 9.00 x 22.5 reinforced rims * 2 wheel chocks ---- 8. Exterior & Body* * Bumper: steel (corners) * Bumper: center part with towing eyes & coupling device * Cab entry: movable on left/right * Mirror housing: construction vehicle * Sun visor: transparent * Exterior storage compartment flap: left * Construction site filter * Mounting parts for tipper body * Clearance for control unit between driver's seat & door pocket ---- * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical gross weight: 48000 kg * Curb weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ---- Currently, we have 3 units in stock. Vehicle number: 11836, 11835, 11837---- Errors and prior sale reserved---- Advertisements and various lettering have been digitally removed.----- We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following ser

Condition: used, mileage: 20,000 km, power: 390 kW (530.25 HP), first registration: 04/2026, fuel type: diesel, overall weight: 26,000 kg, fuel: diesel, color: silver, gearing type: automatic, suspension: steel, Equipment: air conditioning, airbag, central locking, cruise control, D6G Automatic climate control, M8B Air intake mounted behind the cab, M8L Cyclone pre-filter for coarse dust, M7T Regulated water pump, M7T Water pump, regulated, M7I Insect screen in front of the cooling system, M5V High Performance Engine Brake, G5B Twin-plate clutch, N6Z Transmission oil cooler, G5G Mercedes PowerShift 3, Z5M Single PTO, Z5S PTO pump mounted below the upper edge of the frame, F1B M cab ClassicSpace 2.30 m, tunnel 170 mm, F2B Floor variant, tunnel 170 mm, F2G Cab width 2.30 m, F2U ClassicSpace, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Tinted windshield with band filter, F8V Light sensor, F8W Rain sensor, D8A Roof hatch/vent flap in the roof, F0Y Mirror cover, construction vehicle, F6I Heated front mirrors, F6R Air horns, cab roof, F8B 2 remote control keys, F8E Locking system with central locking, F8F Comfort locking system, F8H 2 extra remote control keys, D1D Driver's air-suspension seat, climate control, D1N Co-driver's functional seat, D2N Seat back release, driver's seat, D2W Armrests, both sides, co-driver's seat, D2Y Seat belt control, D3K Seat cover, Dinamica star black, driver's seat, D3L Seat cover, Dinamica star black, co-driver's seat, D0A Leather steering wheel, S3A Airbag, driver, D4Y Side sun visor, driver's side, 218 Rear view camera, E6Y Rear warning system combined with hazard warning lights, J2Z CB radio, E5H Night driving light switch, E6A Trailer socket 24 V, 15-pin, L1C LED daytime running lights, 045 LED taillights, 238 Lane keeping assist, S1I Distance keeping assist, 513 Traffic sign recognition. We are available by phone Monday - Friday until 8:00 PM and Saturdays until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! Gksdpezpfrhofx Akyec !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, mileage: 20,000 km, power: 390 kW (530.25 HP), first registration: 05/2026, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, suspension: steel, Equipment: air conditioning, central locking, cruise control, power assisted steering, seat heater, soot filter, D6G Automatic climate control, V1A Actros, C1W Wheelbase 3,700 mm, M3E Engine OM471, inline 6-cylinder, 12.8 L, 390 kW (530 hp), 2,600 Nm, M8B Air intake mounted behind the cab, M7T Regulated water pump, M7I Insect protection grille in front of cooling system, M5V High Performance Engine Brake, M6L 2-cylinder air compressor, N6Z Transmission oil cooling, G5G Mercedes PowerShift 3, Z5M Single PTO, Z5S Pump PTO below frame top edge, K5M Lockable fuel tanks, F1D L-cab ClassicSpace, 2.30 m, 170 mm tunnel, F2G Cab width 2.30 m, F2U ClassicSpace, F3W Cab tilting device, mechanical-hydraulic, F6F Side wall window, F8V Light sensor, F8W Rain sensor, D8M Electric sliding/tilting glass roof, F7T Door extension, F6I Electrically heated front mirror, F6R Air horns mounted on cab roof, F8B 2 remote control keys, F8E Central locking system, F8F Comfort lock system, F8H 2 additional remote keys, D1D Driver suspension seat with climate control, D1N Functional co-driver's seat, D2N Fold-down backrest driver's seat, D2W Armrests on both sides co-driver's seat, D3L Seat cover Dinamica star black co-driver's seat, D3S Leather seat cover driver's seat, D3B Comfort bed lower berth, D0A Leather steering wheel, D4T Curtain across bed(s), D4Z Side sun blind, driver and co-driver side, 218 Rear-view camera, J2Z CB radio, L16 Fog lights, L9C Pre-installation for additional roof-mounted headlights, L1P LED tail lights, 116# LED indicators in exterior mirrors, 238 Lane Departure Warning, S1I Distance Keeping Assist, 513 Traffic Sign Assist. You can reach us by phone Monday to Friday until 8:00 pm and Saturday until 4:00 pm! More information: Leasing/financing and trade-in possible! Errors and prior sale excepted! All information given without guarantee ... more on our homepage. Gksdsy Rd Elopfx Akyoc

Condition: used, mileage: 200,000 km, power: 315 kW (428.28 HP), axle configuration: 4x4, color: white, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. number). Mercedes-Benz Actros 1843 LS HAD 4x4 semi-trailer tractor unit. Gedpfx Ajzdbn Askyekc !!! 2 units available !!!, A1C front axle 7.5 t, A1H hydraulic auxiliary drive (HAD), A1Y front axle, straight version, B1B electronic brake system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1H electric compressed air supply and control, medium, B2A disc brake, on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B5J brake and electrical connections, low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5P frame, bolted, C6C steering, 1-circuit, C6I power steering pump, regulated, C6Q stabilizer bar, front axle, C7F front underrun protection (ECE), aluminum, C7T integral rear, C8B rear axle fender, 2550 mm vehicle width, C8H fender, 3-part, with EC splash guard, C8I splash guard (EC), front, C8W omission of underbody paneling, aerodynamic, D0L smoker's package, D0S compressed air connection, in the cab, D0U smoke detector, in the cab, D1C driver's air suspension seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D2Y seatbelt control, D3B comfort bed, lower, D4T curtain, transverse in front of bed(s), D4Y sun visor, side, driver's side, D5Y rubber floor mats, driver's and co-driver's side, D6F air conditioning system, D6I waste heat utilization, D6M hot water auxiliary heater, cab, D6Z construction site filter, D7G storage compartment cover, driver's and co-driver's side, D7R storage flaps, above the windshield, D8A roof hatch/ventilation flap, roof, E6Y reversing warning system, combined with hazard warning lights, E7F cable remote control for air suspension, F2C floor variant, tunnel 320 mm, F2G cab width 2.30 m, F2M cab, 420 mm mounting height, F2U ClassicSpace, F3C cab mounting, comfort, air-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall without window, F4X external storage compartment flap, left, F4Y external storage compartment flap, right, F5Y A-pillar trim, F6D windshield, tinted, with band filter, F6I front mirror, heated, F6Q air horn, F6T MirrorCam, F7Y cab entry, left/right, movable, F8B 2 remote control keys, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0R transmission torque arms, optimized for assembly, G0T Predictive Powertrain Control, G2B transmission G 211-12/14,93-1,0, G5A single-plate clutch, G5G Mercedes PowerShift 3, H2C saddle coupling dimension +600 mm, I4A wheel arrangement 4x2, I5A 18.0-tonner, I6D semi-trailer tractor unit, I6I vehicle production plant, Wörth, I6X air suspension, rear axle, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeakers, 2-way system, J2U navigation system, J3Z axle load measuring device, J6C multimedia cockpit, interactive, K2P tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1D automatic high beam/low beam and turning light, L1I fog lights, LED daytime running lights, L2H side marker lights, flashing, L2R 2 LED rotating beacon lights, L3A work lights, lower, L3C work lights, cab rear wall, upper, L4Z stone guard grille, metal, for headlights, M0C underbody panel, against dust swirling, M0Q noise regulation, according to UN-R 51.03 level 2, M5V High Performance Engine Brake, M6L air compressor, 2 cylinders, M7I insect protection grill

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right Godpfxez Dzqte Akyskc * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment outer flap, left * External sun visor, transparent * Air horn * Rotating beacon * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Hot water auxiliary heater, cab * Electric auxiliary air conditioning * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under dashboard * Stowage flaps, above windshield * Sliding roof, electric * Refrigerator, in drawer, under bed ----Electrical system and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel stowage, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reversing warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assistant * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooling system * Water pump, regulated ----Drivetrain: Twin-plate clutch * Transmission G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle steered & liftable * Rocker arm coupling with Doumatik ----Palfinger M10L80 crane mounted on 2-axle truck: * 2 hydraulic supports * 4 adjustable timber bunks (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hrs * Next inspection: * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters Gkodpfx Aksz Dzqyeyjc * AdBlue tank: 60 liters * Technically permissible total weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next technical inspection due: 05.2026 ----Vehicle number/Vehicle: 11675----Errors and prior sale reserved----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----* Trade-in of your old vehicle * TÜV/technical inspection * Complete export handling * Arranging financing * Application for export license plates * Vehicle relocation * Vehicle registration * Vehicle recovery and transportation ----YOUR VTS TEAM

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Gjdpfx Asxhgawjkyokc Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: used, mileage: 21,520 km, power: 103 kW (140.04 HP), first registration: 03/2023, fuel type: diesel, empty load weight: 2,882 kg, maximum load weight: 618 kg, overall weight: 3,500 kg, color: white, gearing type: mechanical, suspension: other, number of seats: 4, total length: 5,985 mm, Year of construction: 2023, number of beds: 4, Equipment: ABS, air conditioning, airbag, bathroom, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Fiat chassis, fixed bed, cab air conditioning, swivel captain's chairs, blower heating, hot water heating, lift/tilt roof window, insect screen door, sun canopy, rear garage, gas heating, bathroom, refrigerator with freezer compartment, rear double bed, hot water, front double bed, roadworthy, touchscreen, accident-free, 4 belted seats, thermal insulation glass, clock & tachometer, iPad/iPod connection, 3-door, 1st owner, front-wheel drive, full service history, Euro 6d, green environmental sticker (4), partial leather, steel rims, summer tires, breakdown kit, rear view camera, bicycle rack for 4 bikes, black, 6-speed gearbox, passenger airbag, 2 airbags, parking assist, parking assist camera, rear parking sensors, electric windows, multifunction steering wheel, radio, outside temperature display, tinted glazing, heated exterior mirrors, power steering, non-smoker vehicle, electric exterior mirrors, brake assist, third brake light, center armrest, German version, new general inspection/emissions test (HU/AU), vehicle immediately available. Vehicle financing price: We are happy to provide you with a customized financing or leasing offer according to your requirements. Buyout of your previous credit and trade-in of your used vehicle possible. Nationwide registration service available = price on request. Nationwide vehicle delivery available = price on request. Warranty or extended warranty for any vehicle = price on request. Vehicle delivery package currently at a special price for only €149. Additional services such as tow bar, wheels/tires, underbody protection, marten protection as well as floor and wall linings for vans are available through our in-house BOSCH Car Service workshop = prices on request directly from our sales staff. Long-distance travel is no problem! When purchasing a vehicle, we will pick you up free of charge from Hagenow Land station. Up to 400 vehicles can be inspected at our Hagenow location at any time. Despite our best efforts, errors in the listing or data transmission may occur. Therefore, liability in ca Gsdpfxsy Dh Dlo Akyokc

Condition: used, mileage: 46,919 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width 2.30 m * Cab: 600 mm roof height * ClassicSpace interior * Driver's comfort suspension seat * Passenger's functional seat * Seat covers: velour (driver + passenger + center seat) * Side roller blinds (driver & passenger) * Air conditioning * Roof hatch / ventilation flap * Storage compartment lid: driver and passenger side * A-pillar trim * Tinted windshield * Interior color: greige/anthracite * Smoker's package * Compressed air connection in the cab * Instrument cluster: 10.4 cm * Classic cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking system ----2. Engine & Powertrain * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Two-disc clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the cooling system * Underride protection plate under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO: rear, hydraulic pump ISO 7653D * Auxiliary PTO ----3. Chassis, Axles & Frame * 8x8/4 all-wheel drive Gksdpfx Asyql Dnskyjc * Front axle: 9 t, straight design * Rear axles: 16 t, crown wheel 300, planetary gears * Front spring: 2x9 t, 4 leaves * 2nd axle: steered * Rear spring: 2x16 t * Stabilizer bar: front axle * Stabilizer bar under frame, rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Fenders for chassis transport * Omission of rear underrun protection (ECE) * Central lubrication system ----4. Brakes & Safety * Drum brakes: front & rear * Electronic Braking System (EBS) 4th generation * ABS: can be deactivated * Parking brake: electronic * Reverse warning * Speed limiter: 80 km/h * Cruise control ----5. Electrical System & Electronics * Batteries: 2x12 V / 170 Ah (Exide) * 12 V / 15 A connection point * 24 V / 15 A socket: passenger footwell * Truck Data Center 7 (FB Card) * Pre-installation for FleetBoard Manager App * PSM 2nd generation ----6. Tanks & Fluids * Main tank: 330 l, aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ----7. Tires & Rims * Front axles: 385/65 R22.5 on 11.75x22.5 steep shoulder rims * Rear axles: 315/80 R22.5 on 9.00x22.5 reinforced rims * 2 wheel chocks ----8. Exterior & Body * Bumper: steel (corners) * Bumper center section with towing eyes & coupling pin * Cab entry: movable, left/right * Mirror housing: construction vehicle * Sun visor: exterior, transparent * Exterior storage compartment flap: left * Construction site filter * Fastening parts for dump body * Clearance for control unit between driver's seat & door pocket ----* Tire dimension: front axle 385/65R22.5 * Tire dimension: rear axle 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical total weight: 48000 kg * Tare weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ----Currently, we have 3 units available. Vehicle number: 11835 Vehicle number: 11836 = 41863 km Vehicle number: 11837 = 83494 km ----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. For example, we can offer you, for an add

Year of construction: 2021, condition: used, 2021 Eillert WASH-20 Double Washer – Like New, Low Hours Premium Vegetable Washing System – Ready for Immediate Production Offered for sale is this 2021 Eillert WASH-20 Double Washer, a premium vegetable washing system in exceptional, like-new condition. The machine has very low operating hours, has been meticulously maintained, and is ready for immediate operation. Designed for professional fresh produce processors, the WASH-20 combines high washing performance with gentle product handling, making it suitable for delicate leafy vegetables as well as heavier products requiring intensive cleaning. ----- Key Features - Manufacturer: Eillert - Model: WASH-20 Double Washer - Year: 2021 - Condition: Like new - Operating hours: Very low - Double washing section for superior cleaning performance - Stainless steel hygienic construction - Gentle water turbulence to minimize product damage - Efficient removal of sand, soil, insects and floating debris - Integrated water recirculation and filtration system - Easy access for cleaning and maintenance - Frequency-controlled operation - Immediately available ----- Suitable Products Gsdpfx Aszg Azhskyokc The WASH-20 is suitable for processing a wide range of fresh vegetables, including: - Leaf lettuce - Baby leaf - Spinach - Rocket (Arugula) - Fresh herbs - Cabbage - Chicory - Mixed salads - Other delicate leafy vegetables ----- Technical Specifications - Double washing system - Stainless steel food-grade construction - Gentle bubble washing technology - Adjustable water flow and turbulence - Integrated discharge conveyor - Sand and heavy particle separation - Water recirculation system - Easy-clean hygienic design - 400V / 50Hz / 3 Phase Capacity depends on the product and contamination level and can reach up to approximately 1,500 kg/hour. ----- Condition This machine has seen very limited use and is in excellent cosmetic and technical condition. The photos clearly show the outstanding condition of the machine, including the wash tanks, conveyors, screens and stainless-steel framework. A perfect opportunity to purchase a nearly new Eillert washer at a significant saving compared to new. ----- Why Choose This Machine? - ✔ 2021 model - ✔ Very low running hours - ✔ Excellent technical and cosmetic condition - ✔ Premium Dutch-built quality - ✔ Ready for immediate production - ✔ Worldwide shipping available ----- Location Emmeloord, The Netherlands Inspection under power is possible by appointment. Contact us for pricing, additional photos, videos or a live demonstration. Worldwide transport and export documentation can be arranged by STC Food Solutions. More photos and full specifications: / * Manufacturer: Eillert * Model: WASH-20 Double Washer * Condition: Like new * Year: 2021 * Operating hours: Very low

Condition: excellent (used), functionality: fully functional, Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Gsdpfxslg A Uus Akyokc Manufacturer: Braby Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 16,000 mm Total height: approx. 19,750 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.5 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 90° Equipment and connections: In the upper floor: 1 x access dome DN 600 with hinged cover 1 x ventilation nozzle with insect screen 1 x roof edge railing with handrail 2 x crane eyelets 1 x flange for filling line Various nozzles for measuring and control technology On the shell: 1 x access door approx. 850 x 2,000 1 x filling pipe NW 80 1 x cable duct 1 x nozzle for level indicator Various pipe support brackets for filling pipe The silo ends at the bottom in a 60° cone with a flange. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Otherwise, as per the pictures and drawing.

Condition: new, functionality: fully functional, SCHORR Rotary Mower RR580KRM - Type: High grass mower/rotary mower - Working width: 58 cm for efficient mowing of meadows, roadsides, and orchard areas - Cutting system: 4 freely swinging blades, ideal for tall, dense grass - Swath deposit: Removable swath cloth for a clean cut with no mulching - Function: Self-propelled, easy to operate – suitable even on slopes and uneven ground - Maneuverability: Wheel freewheel for easy turning, separate engagement of mowing and drive - Availability: NEW & AVAILABLE IMMEDIATELY! Gkedpow Sntbsfx Akyec Applications The RR580KRM is excellent for overgrown areas, orchard meadows, and roadsides. Its 58 cm working width enables fast mowing with neat depositing of the cut material – perfect for later hay or green forage processing. Rotary mower system The centerpiece of the mower is the ball-bearing glide disk with four movable blades. This robust system reliably handles varying grass heights and obstacles for a uniform cutting result. The cutting height of approx. 30 mm protects insects and young plants. Drive & Handling The wheel drive can be engaged as needed for optimal working speed. Freewheeling wheels reduce effort when cornering, making maneuvering easier. Grippy tractor-profile tires provide maximum traction on diverse surfaces. Typical Uses - Orchard meadows and tall grassland - Roadsides, embankments, and fence lines - Fallow land and boundary strips around farms, equestrian arenas, or storage areas Ergonomics and Transport The height-adjustable and foldable handlebar ensures ergonomic operation and compact storage. Weighing approximately 65 kg, the RR580KRM remains stable yet agile on uneven terrain. Technical Specifications - Manufacturer: SCHORR - Model: RR580KRM - Engine: Air-cooled 1-cylinder four-stroke engine with 6 HP - Drive: Self-propelled - Blade type: Freely swinging blades - Number of blades: 4 - Dead weight: 65 kg Dimensions - Overall length: 1070 mm - Overall width: 570 mm - Overall height: 840 mm - Cutting height: approx. 30 mm - Cutting width: 580 mm We always have spare parts in stock and our service team is happy to assist with any questions. Whether delivery or pickup in 48465 Schüttorf – we have the right solution. Please contact us to schedule pickups. Would you like to finance or lease? Talk to us – we offer attractive options. Our team looks forward to advising you!

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS Gkodpfxsnl Dzxo Akyjc capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 2,550 mm, Equipment: lighting, The Villex X-Series Black Short 1.0 from Villex Container GmbH is a premium 6.0-meter office container distinguished by its well thought-out features and modern design. Measuring 6.00 m in length, 2.50 m in width, and 2.55 m in height, it offers a versatile usable area of approximately 15 m² – perfectly suited as a mobile office, meeting room, or temporary workstation. Its robust construction with 75 mm thick sandwich panels provides excellent thermal insulation, making the container suitable for year-round use, even under extreme weather conditions. The sophisticated combination of anthracite panels (RAL 7016) and a deep black base frame (RAL 9005) give the container an elegant, striking appearance. Two large aluminium windows (1000 x 1000 mm) with integrated fly screens ensure plenty of light and air, providing not only natural daylight but also effective insect protection. A sturdy steel door (RAL 9005) guarantees security and durability in everyday use. In terms of electrical equipment, the Villex X-Series is fully outfitted: with a 32 A CEE heavy-duty power connection, five power sockets, two LED lights and one light switch, the container is immediately ready for use – whether for technical equipment, workspace lighting, or IT infrastructure. Despite its solid build, the container weighs only 1,500 kg, making it flexible and easy to transport. Article number: XSERS1.0 Variant: 6.0 m container Length: 6.0 m Width: 2.50 m Height: 2.55 m Insulation thickness: 7.5 cm Panel colour: RAL7016 (anthracite) Base frame colour: RAL 9005 (black) Weight: 1500 kg Gkjdpey H Em Njfx Akysc Doors: 1x door (steel) Windows: 2x windows with fly screens (1000 x 1000 mm) Electrics: 5 power sockets, 2x LED, 32A CEE plug & 1x light switch