Used Hyundai Robex 80 Cr 9 for sale (175)

Condition: used, New: No Empty weight: 8 kg Ijdpfxoxhr Els Afiebc Part suitable for: trucks Type number: TM000A22501 HDL150 Detroit diesel OEM : TM000A22501 Article nr.: V151177001-veiling Used Starter Hyundai truck HDL150 12V

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 320 mm, spindle bore: 80 mm, bar diameter (max.): 70 mm, Complete with accessories as shown in the photo Ijdoxhdvpepfx Afiebc

Condition: used, Year of construction: 2023, operating hours: 522 h, ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception. Hyundai HL 970A 4x4 - Including bucket - Tyres: 26.5 R25 - Radio - Operating hours: 522 - Reversing camera - Air conditioning Ibedpfx Asxhbmfefijc - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W47 ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Ibedpsxdxhrjfx Afiec Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6-030, turning diameter over cross slide: 254 mm, turning length: 500 mm, spindle bore: 70 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,300 kg, - Year of manufacture: 1996 - First commissioning: 1998 - Single owner, used in our own operation - Fully functional, powered and ready for demonstration - X-axis travel: 180 mm - Z-axis travel: 510 mm - Turning diameter: 254 mm - Turning length: 500 mm - Spindle speed: 3,600 rpm - Spindle bore: 70 mm - Spindle motor power: 15 kW - Control: Siemens 840 C - Chip conveyor - 8-position turret - 3-jaw chuck with hollow clamping cylinder - Fully automatic tool presetter - Dimensions: 2,600 x 1,650 x 1,830 mm – 4,300 kg Isdpfx Afoxgtvcsijbc Net price ex-works Luckenwalde (Germany), excluding transport

Condition: new, feed pressure 8 bar Iedpfx Afsu Imhisisbc Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Iodpfxjxgdluo Afisbc Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) Isdpfjulk D Iex Afisbc - Hydraulic unit - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception. Hyundai HW 140A wheeled excavator - without attachments - tyres: 10.00-20 - radio - operating hours: 5 Errors and prior sale excepted. Internal vehicle number: W38 Ijdpfexhbl Uox Afiebc ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception.

Condition: like new (used), Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, Hyundai WIA KF 5600C Machining Center (LIKE NEW) Hyundai WIA KF5600 C Commissioned: 2019 Table: 1250 x 560 mm 12,000 rpm X/Y/Z travels: 1100 x 560 x 635 mm 10.4” display Random magazine for 30 tools Internal coolant at 30 bar Isdpjxf Ey Dofx Afiebc Chip conveyor Renishaw TS 27R probe PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel X: 1,000 mm Travel Y: 530 mm Travel Z: 510 mm Number of axes: 3 Max. spindle speed: 10,000 rpm Table size – length: 1,200 mm Table size – width: 510 mm Ijdpfx Afjxcn N Aeijbc MACHINE DETAILS Control type: Fanuc Dimensions & weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Transport packages: 3 Motor power: 11.0 kW Operating hours: 3,010 h EQUIPMENT Documentation CE marking

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V tank capacity 12 l engine output 7,0 PS weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) Ijdpfx Afou Imf Ujiebc

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Built in 2005, it is equipped with a Siemens 810D CNC control and features ideal for multi-axis machining, including automatic tool change and dual-pallet machining capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of Manufacture: 2005 CNC Control: Siemens 810D Machine Weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle Taper: ISO 40 Spindle Speed: 10,000 rpm Spindle Motor Power (cont. / 30 min): 12 / 16 kW Machining Capacity X-Axis Travel: 570 mm Y-Axis Travel: 410 mm Z-Axis Travel: 580 mm Distance from Spindle Nose to Table Surface: 197 – 777 mm Distance from Column to Spindle Center: 495 mm Table Table Dimensions: 2 x (650 x 410 mm) Number of Tables: 2 Maximum Table Load: 2 x 200 kg No. 2 Rotary Tables Ø160 mm with counter support Feed Rates Rapid Traverse X/Y Axes: 36,000 mm/min Rapid Traverse Z Axis: 30,000 mm/min Cutting Feed Rate X/Y/Z Axes: 1 ÷ 10,000 mm/min Automatic Tool Changer Tool Taper: BT-40 Tool Magazine Capacity: 24 stations Max. Tool Diameter: Adjacent Tools: Ø90 mm Non-adjacent Tools: Ø150 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line chiller Iedsxfarhopfx Afiebc Transformer Manuals, electrical diagrams, and CE Declaration

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light Isdpfxsw Dcdys Afisbc • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception. Ijdpfxsxhbmle Afisbc Hyundai HL 975 A CVT 4x4 - Includes bucket - NEW VEHICLE - Tyres: 26.5 R25 - Radio - Operating hours: 32 - Rear-view camera - Air conditioning - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W46 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception.

Condition: used, mileage: 63,791 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,160 kg, first registration: 05/2016, loading space length: 2,375 mm, emission class: euro5, color: white, number of seats: 3, total length: 5,150 mm, total width: 1,920 mm, total height: 1,925 mm, Equipment: ABS, air conditioning, central locking, soot filter, Errors and prior sale excepted! Internal number: 1051. U780351 ----EQUIPMENT * Manual air conditioning – incl. pollen filter and recirculation switch * PIONEER radio with CD player * Transmission: 6-speed manual gearbox * Fog lights * ABS with EBD * Passenger side airbag * Driver side airbag * Exterior mirrors (2), electrically adjustable and heated * Brake assist * Rear double-wing doors * Tachometer * ESP (Electronic Stability Program) * Power windows, front * Tinted windows * Heated rear window with timer * Height-adjustable headrests (2) * Paintwork: Solid paint * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Sliding side doors, closed * Mud flaps front and rear * Side impact protection * Power steering * Passenger double bench seat * Driver’s seat longitudinally adjustable * Partition with viewing window * Lashing eyes (10), lateral * Immobilizer * Central locking ... and much more. ----The vehicle is unprepared! Nationwide delivery available at extra cost. Iedpfx Afohznt Reijbc Errors and prior sale excepted. We are happy to consider your vehicle as part of a trade-in. Financing / leasing possible without down payment! Do you have any questions? We are happy to assist you!

Condition: used, functionality: fully functional, machine/vehicle number: HKHHN05KC0000861, Year of construction: 2012, operating hours: 4,030 h, load capacity: 3,150 kg, lifting height: 4,300 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, power: 48 kW (65.26 HP), fork length: 1,800 mm, drive type: Diesel, Diesel Forklift Chassis number: HKHHN05KC0000861 Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Ibsdpsxafa Tjfx Afiec Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 28x9-15 Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires size: 6.50-10 Rear tires condition: 60 - 80% Description: In addition to this MAKE-MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible for us. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Call me, Marco Levermann, I will be happy to advise you in detail on this MAKE-MODEL. By the way: Our forklift workshop specializes in repair and maintenance of large machines from 8 tons upwards. We can also offer your vehicle for commission sale through us. Side shifter, 3rd valve, 4th valve, half cabin, heater,

Condition: new, Year of construction: 2024, fuel type: diesel, power: 875 kW (1,189.67 HP), motor manufacturer: Hyundai DP222CC, General information Field of application: Construction Serial number: DX22-OOG00401490 Weights Empty weight: 9.561 kg Functional Generator capacity: 1.000 kVA CE mark: yes Other information Fuel consumption: 162 Liter / Hour at 75% Load PRP Generator: Leroy Somer TAL-A49D Frequency: 50 Ibedsugfa Eopfx Afisc Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1410 l Transport dimensions (LxWxH): 5x2,25x2,6 Production country: TR Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222CC / Doosan DP222CC

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Ijdpfxjxfaqwo Afisbc Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar MACHINE EQUIPPED WITH: Ibedpoxb Rtbofx Afiec 4 vices + 40 cones + arbors + tools

Condition: new, Year of construction: 2023, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Pickup dates must be arranged in advance without exception. Hyundai HL 970A XT 4x4 with bucket - Including bucket - Radio - Operating hours: 10 hrs - LED work lights Iodpjxhbkdofx Afijbc - Transport width: 2.97 m - Engine power: 242 kW - Displacement: 8.9 L Errors and prior sale excepted. Internal vehicle number: W37

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Isdpju Ehi Aefx Afijbc Fanuc I series, coolant, swarf conveyor.

Condition: used, Year of construction: 2016, operating hours: 1,985 h, PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HL 970 4x4 - Incl. bucket - Tyres: 26.5 R25 - Radio - Operating hours: 1,985 - Reversing camera - Air conditioning - Central lubrication system Ibodpfoxhbigsx Afiec Subject to errors and prior sale. Internal vehicle number: W50 PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Iedpfx Afoxhbiaeiobc Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle - Crawler excavator - Track drive - Without attachments - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Ibedpfx Afoxhbhvsisc Collection appointments must be arranged in advance.