Used Hytec Zl 08 A for sale (15,693)

Condition: used, axle configuration: 3 axles, first registration: 05/2002, color: other, Year of construction: 2002, Empty weight: 6.850 kg Axle 1: left 6 mm right 6 mm Axle 2: left 7 mm right 7 mm Axle 3: left 6 mm right 6 mm Hodpeua E H Eofx Afisnu

Condition: used, Year of construction: 2001, gearing type: other, first registration: 01/2001, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Hnjdpfxei Rpi To Afiju 2x available! 8t front axle cranked, disc brakes, EBS. From MAN TGA 18.360 4x2, wheelbase 3600mm. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 1991, table length:1500 mm table width:1000 mm daylight:800 mm Hnedpfjcxxwuex Afisu measurement range X =:1400 mm measurement range Y =:1000 mm measurement range Z =:800 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:2,0 x 1,8 x 2,1 m 3-D coordinate-measuring machine, caste measuring plate with finely machined surface with T-slots, ZETT-MESS evaluation computer system, EPSON-statistical printer, machine equipped with temperature stabilizing heating and video camera, for TV-transmission of microscope-picture capture, additive cold light source with two flexible fibre optics, Sony-Mavica video printer, good condition

Condition: used, Technical details: flow rate: 2,4 m³/min current- max.: 6,6 / 11,5 A voltage: 380 / 220 V protection class: IP54 Hjdou Nzv Rjpfx Afisnu frequency: 50 Hz total power requirement: 3 kW weight of the machine approx.: 30 kg dimensions L x W x H: 1,o x 0,8 x 0,2 m Mehrstufige Hochleistungspumpe. Further characteristics: -Insertion depth= 320mm -Large cover plate 360mm x 280mm - Motor RpM: 2870 RpM *

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 507332, total height: 2,415 mm, total width: 1,550 mm, total length: 1,815 mm, type of input current: DC, overall weight: 3,213 kg, 2 pieces from 2018 Heuft VTT-08 rotary thermal oil oven, baking surface 9 m2, oven for one trolley 600x800 mm, touch control on the left, door right, hood with fan Illustrative photo Hjdev Hwrfopfx Afienu

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 01 - 346, year of last overhaul: 2025, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM AND 250 X 250 MM ¼ FOLD NAPKINS 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 350 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality - Ø 254 mm • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3. Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 500 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder. • integrated quick-change device with air support for printing plate sleeves • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 500 mm (cocktail) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST with S-VGA Monitor 6.Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon print end machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, cocktail 250x250mm 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 200 – 230 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power 93 KW. 3 PACKING MACHINE Producer: Senning Model: 522 SE/M-30 Serial number: 71,155 Production date: 2002 Formats: • Lunch 330 x330 mm ¼ folded • cocktail 250 x 250 mm 1/4 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Hedpjwnxglsfx Afisnu Maximum packing speed: 30 packs/min Standard packing speed: 30 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mm ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 20 KW.

Year of construction: 2001, condition: used, cooling device YORK YCSA 08 M+T, aircooled, 8 kW cooling power (7°C / 30°C), year: 2001 - 0 hours, price: 2.950 €, contact: Herr Rainer Eckerle Hsdpjwkqxsfx Afionu

Condition: used, HFA-L-440 S, fimotec-fischer, linear oscillating drives and fork light barrier Model: 08-6073-02 Type: HFA-L-440 S Condition: Used Hnsdpfxsutag Ij Afieu

Condition: used, Cooling unit Glue cooler Hjdpfxorc Alwo Afionu Cooling unit

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: LDN0231008630, load capacity: 230 kg, lifting height: 6,000 mm, empty load weight: 1,710 kg, fuel type: electric, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 1,710 kg, chain condition: 100 %, 0 Crawler work platform Crawler work platform CAPRI 06-08 We offer you; Crawler work platform Cabri 06-08 New machine Working height 8 meters Platform height 6 meters Machine dimensions: Machine length: 2067mm Width machine: 1030mm Machine height 2183mm Height platform folded 1832mm Length platform (retracted) 1859mm Length platform (extended) 2759mm Platform extension: 900mm Platform dimensions: 1859x810x1130m0 Load capacity: 230kg Load capacity platform extension: 113kg Turning circle machine: 0 meter Drive motor 24V/ Batteries 4xDC 24 V Charger integrated 24V/15 A Hnodpfxjrig Dde Afisu Machine weight 1710kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Croyk77br3 Steffen Küster K. u. K. Maschinen GmbH Old airfield 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2800x1150x1950 mm Weight 430 kg Hodpov A Hy Refx Afionu Total power requirement 8,5 kw

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Hnjdpfx Aferlf Tqjisu

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Hsdpoq H Spvefx Afijnu Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Hedpovf Iuzefx Afienu Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Condition: used, Year of construction: 2002, Krupp cone crusher Type Krupp Kubria 90/1-08 Hnodsvy Hy Eopfx Afiou Year of manufacture 2002

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 450 kg, lifting height: 8,000 mm, overall weight: 2,830 kg, empty load weight: 2,830 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 450 kg, Equipment: UVV, Crawler work platform Crawler work platform CAPRI 08-10 We offer you; Crawler work platform Cabri 08-10 New machine year of construction 2024 Working height 10 meters Platform height 8 meters Machine dimensions 262x139x240 cm Load capacity platform 450kg Hnsdpopwb Husfx Afiou Extension load 113kg Platform dimensions 227x 112 cm Platform extended 317x 112 cm Machine weight 2,870 kg Charger integrated in the machine 48V/25A 2 drive motors installed 2x48V/4 Kw Gradeability 25% Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge.

Condition: new, Year of construction: 2005, functionality: fully functional, power: 6,200 kW (8,429.64 HP), rotational speed (max.): 744 rpm, input voltage: 6,000 V, input frequency: 50 Hz, input current: 678 A, type of input current: three-phase, overall weight: 22,000 kg, total length: 3,800 mm, total width: 2,850 mm, total height: 2,800 mm, type of cooling: water, protection type (IP code): IP55, 1 unused spare 3-phase electric motor from clearance stock. Manufacturer: Helmke Type: DWK 900-08-037 Power: 6200 kW Speed: 744 rpm Direction of rotation: Clockwise Voltage: 6000 volts Current: 678 amps Protection class: IP55 Insulation class: F Cos. f: 0.91 Frequency: 50 Hz Cooling: Water Bearings: Insulated sleeve bearings Length: 3800 mm Width: 2850 mm Height: 2800 mm Hsdpfx Ajwliu Uefionu Shaft height: 1000 mm Shaft diameter: 240 mm Shaft length: 350 mm Weight: 22000 kg

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Hodpfx Aorq Hd Sofijnu Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: ready for operation (used), Specifications Manufacturer NILES Hnedpowgnmfofx Afiju Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with New electrical system

Year of construction: 2022, condition: new, Container access ramp, Fixed Model, this access ramp is equipped with lateral and central sleeves allowing the driver to transport the boom and to position it easily. The unloading of the container can therefore be done as quickly as possible. Hnodpfx Ajim I Hqofiou Brand: AZ RAMP - Type: HCNN-08 Nominal Capacity: 8 000 Kg Dimensions: 1 500 x 2,000 mm Clean weight: 295 Kg 2 Stowage Chains Grey color Set up in 10 seconds. #rampe_de_chargement; #Container_ramp; #rampe_depotage_container

Year of construction: 2021, condition: like new (used), 1.Introduction: 1. This document describes the functional requirements regarding a; 1.1. LC tray degassing chamber 1.2. LC tray degassing chamber is a (controlled vacuum chamber) in which an aluminum tray containing LC liquid is degassed in a vacuum environment during a period of time (i.e. entrapped air is evacuated) Vacuum profiles; Hodpfx Aewam Sasfisnu 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile 2.Interior; 2.1.Stainless steel (aluminum) polished process chamber (inside) 2.1.1. Leak rate to be discussed 2.2. LC-tray (adaptation) drawer to easily (un-)load the LC-tray (no shock/shake movement allowed), see Section 2 LC-tray dimensions and appendix 1 2.3. LC tray must be level (waterpas) at all times to prevent LC spillage 2.4.Chamber must be easily/quickly accessible for cleaning and/or LC tray (un)loading 2.5.Chamber inside must be polished for easy cleaning and prevention of contamination and/or moisture collection 2.6.Monitoring (window) possibility of the degassing cycle i.e. monitoring LC liquid surface behavior in the LC tray 2.7.No process contamination caused by chamber material (-manufacturing)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, General / technical data: Offered here is a very well-preserved, fully automatic strapping system (Sinodeband strapping system) for Euro pallets. The machine is equipped with a stable roller conveyor for Euro pallets. An additional side feed unit and a scale are integrated into the roller conveyor. The system is in very good condition and can currently still be viewed with power on. The sale is ex-site, for self-disassembly! Manufacturer: OMS Group Italy (officina Meccanica Sestese S.p.A) Model: 08 RP Year of manufacture: 2018 Machine no.: 26280 Basic pallet dimensions: 1,200mm x 800mm (Euro pallet) Max. height: 1,800mm Min. height: 350mm Min. weight: 100 KG Max. weight: 1,000 kg Max. number of bindings: approx. 50/hour Cycle time: approx. 115 sec/binding including pallet positioning Space required for the machine: (w x d x h) approx. 4,000 x 10,000 x 3,700mm (with roller conveyor) Hnjdpfx Asv Dl Aaefieu Power supply/connection value: 400 volts 50 Hz/nominal current 6.5A

Condition: good (used), WMA WMP 08 Single-handed butt point machine Air-cooled single-handed impact point system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - Problem-free welding of all sheet metal - galvanized sheets can be welded perfectly thanks to controlled current increase and controlled current decrease - Air-cooled, equipped for external water cooling - tools are easy to change thanks to standardized swivel connections - only one plug each for welding power cable, control cable and water cooling - reproducible welding results at all times thanks to built-in, automatic energy control Microprocessor thyristor control - constant current control - seamless process monitoring - Easy and convenient to operate - all set parameters and process variables can be read at a glance - welding parameters can only be changed by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor thyristor controller - 7 times - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof storage of parameters - "with/without power" switchover via button Additional configuration parameters locked for users): - Program selection - Progressive contact - Time of continuous contact Hnjdpeq H Aqxsfx Afiou - Two-hand interlock (check) - Interlock Start signal - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - Delay 1st half-wave External inputs (24V, DC stabilized and switching) - Thermoswitch - Thyristor temperature - EMERGENCY OFF - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold-off time (only force) - Two-hand interlock (check)* * These functions can be activated or blocked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Welding solenoid valve - Relay Advance contact - Relay Ready for operation Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle) 22.5 kVA Switch cabinet with PLC logo PDF files under Documents tab Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, overall weight: 750 kg, empty load weight: 215 kg, maximum load weight: 535 kg, loading space volume: 2.3 m³, loading space length: 2,060 mm, loading space width: 1,100 mm, loading space height: 1,000 mm, color: silver, construction height: 1,550 mm, working width: 1,560 mm, Hydraulics, automatic reverse, hot-dip galvanizing, unbraked, sheet steel body, * IMMEDIATELY AVAILABLE * Sheet steel body, unbraked Technical data: Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750kg - Unladen weight: 215 kg - Payload: 535 kg - Interior dimensions: 206 x 110 x 100 cm (L x W x H) - Overall exterior dimensions: 326 x 156 x 155 cm (LxWxH) - Loading sill height: 51 cm - Tires: 155/70R13 steel rim - Brake: no - Support wheel: at extra charge - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, Finnish multiplex board - Walls: sheet steel - Roof material: sheet steel - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional - Rear door: - Cover - Tailgate: no - Tailgate material: - - Tailgate/door function: tension lock - Interior light: at extra charge - Supports: at extra charge Frame/chassis: tubular drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval documents: COC papers Standard equipment: - Sturdy drawbar, hot-dip galvanized - Floor panel made of Finnish multiplex - Side walls made of very solid sheet steel - Laterally slanted lid for improved access to tools or built-in interior shelves - Lid with sealing profile, - Tension locks for lid - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - support wheel - rear supports - 100km/H approval with wheel shock absorber - lashing straps - lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hnjdpeu Hrvvjfx Afiju

Condition: ready for operation (used), Condition Used Stock Number 1337 This listing is for a Advantage-Lab AL02-08 Autoclave. The unit is in full working condition and is ready for immediate release. The Advantage-Lab AL02-08 is a cutting-edge, fully automatic vertical autoclave designed for superior sterilization in laboratories. With a generous 85L capacity and robust stainless steel construction, this floor-standing unit is perfect for a variety of applications, including sterilizing liquids, solid items like pipettes and filters, glassware, and even waste. Key Benefits:Versatile Sterilization: Effectively sterilizes nutrient media, buffer solutions, and various lab materials, ensuring comprehensive tomisable Parameters: Set the temperature between 60°C to 137°C and adjust sterilization time from 1 to 99 minutes to meet specific ety First: Equipped with a temperature and pressure-dependent door lock, it prevents accidental opening when under pressure, while a water level safety device ensures reliable steam uitive Control: A user-friendly interface displays real-time temperature, pressure, and time, complemented by visible and acoustic alarms for added xible Operation: With six individual programs and pre-selected parameters that remain stored until changed, operating this autoclave is efficient and convenient. Hnodpfxsvyvi No Afiju Specifications:Dimensions: 500 x 650 x 950 mmWeight: 125 kgVoltage: 380/400 VOperating Pressure: 0 to 230 kPa