Used Hydraulic Power Pack 5 5 Kw for sale (74,985)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Cjdovllxdjpfx Ab Tork Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Voltage: 3-phase four-wire, AC400V, 50/60Hz Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Installed outdoors, total operating hours approx. 15,815 kWh Codpfxjxvmxpe Ab Terk Available for pickup/shipping from December 2025 Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Crjdpfsxc Ni Rex Ab Tok

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Csdpfei Ar Ruox Ab Tork Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available Cedpodqm Epsfx Ab Tjrk -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures. Crjdpfjrdzg Hox Ab Tok

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting software Low pressure gas alarm gas pressure monitor and SW control Voltage stabilizer 48-72 KVA Laser class 4 enclosure Heavy duty machine base. High power servo motors. Intelligent cutting control system, easy operation Fast tacking, supported by segment and step tacking technology. Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Crodpfxoci Ik Ss Ab Tok Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. Speed 120 m/min Sheet loading 1500Kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 machine power 32-48 kW Voltage 380V/50Hz Delivery time 5 months (construction time + transport) delivery to customer's yard 3.500€ Installation and training 8.850 € Industry 4.0 software 9.500 € FILTERCUBE 2H, 4,0 kW, 40 m² 10.500,- € The Filtercube series is an extraction system equipped with filter cartridges, in the field of smoke filtration and dusts.

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm Codpfx Aboc Nlyns Tjrk -Design: B5 -Number: 2 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Cjdowiqggspfx Ab Tjrk

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Cjdpfx Abettwt Ao Terk

Year of construction: 2015, condition: good (used), Fan, fan, electric motor, blower, axial fan, duct fan -Manufacturer: FläktWoods, axial fan type 31JM / 16/4/5/36 S / S 3 S BT4 -Motor: 380-420 V / 1370 rpm / 100 W. -Ventilation duct: Ø 315 mm -Hole circle: Ø 355 x 10 mm -Protection class: IP55 Crodpfx Asgx Am Sjb Tsk -Number: 1x fans available -Price per piece -Dimension: Ø 395 x 360 mm -Weight: 15 kg / pc.

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available Cedoc I Rlajpfx Ab Tsrk -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 Cedewwqwujpfx Ab Tork -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Condition: good (used), Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg Crsdpfjb Ix Niox Ab Tok

Condition: used, Power supply unit, converter, power supply, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply unit -Type: TRIO-PS/1AC/12DC/5 .: 2866475 -Input: 100-240 V Cedpfx Ajghb Eweb Tsrk -Output: 12 V -Dimension box: 185/175/H50 mm -Weight: 0.6 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply Credjfg E E Ijpfx Ab Tjk -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No .: 2938594 -Number: 3x power supply available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Csdpfxjc I Rk Ie Ab Terk -Gearbox manufacturer: MOTOVARIO TKF/5 -Manufacturer engine: Ansaldo A1C0712CA249 -Motor power: 0.37 kW -Speed range without angular gear: 190-1000 rpm -Speed range with angular gear: 19-100 rpm -Motor: adjustable -Hollow shaft: Ø 22 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 530/200/H220 mm -Weight: 22 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Crjdpfx Aboc Nnans Tok -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range: 35-180 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 445/190/H265 mm -Weight: 21 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range without angular gear: 190-1000 rpm Crjdpfxec Nfdpj Ab Tok -Speed range with angular gear: 19-100 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 570/220/H210 mm -Weight: 28 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Motovario Type: TKRF/5 -Motor power: 0.37 kW -Speed range: 26-143 rpm -Motor: adjustable -Construction: B5 -Drive shaft: Ø 19 mm -Number: 1 piece of motors available Cedsc Ni Unopfx Ab Tjrk -Price: per piece -Dimensions: 450/183/H200 mm -Weight: 20 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Motovario Type: TKRR/5 -Motor power: 0.37 kW -Speed range: 20-100 rpm -Motor: adjustable -Drive shaft: Ø 24 mm -Number: 1 piece of motors available Crjdpjc Ni Upefx Ab Tjk -Price: per piece -Dimensions: 550/180/H230 mm -Weight: 24 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm Cedjc R R Awepfx Ab Tjrk -Construction: B5 -Number: 1 motors available -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Condition: ready for operation (used), Bosch VM 5 / E-G - VM 5/E-G Power Supply 1070916727, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Cjdpfxoi D Ug Hs Ab Tsrk

Condition: used, axle configuration: > 3 axles, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Technical condition: average Cedex A Dmqjpfx Ab Tork Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Cedpfx Absi Dfids Tork Location: ex stock 54634 Bitburg - immediately available -