Used Hpp for sale (46)

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible Ppsdpsyaiiysfx Aalsl • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7 Pjdpfx Aox A Tamoaljpl

Condition: excellent (used), Year of construction: 2007, - Working area: 4400x4400 mm Ppedpfoycic Eex Aalol - Diameter: 72 mm - Main saw: 7.5 kW - Scoring unit: 1.1 kW

Condition: used, machine/vehicle number: 008384, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm Psdpfx Asx Swcmealjpl No of Grippers: 9

Condition: excellent (used), Year of construction: 2008, Machine Data Holzma HPP 230 43/43 Cutting length: 4300 mm Cutting width (program fence travel): 4300 mm Roller rail element: 10 lanes, 1 piece Roller rail (element, 2 lanes): 5 pieces Clamping grippers: 6 pieces, first 3 are 2-finger; others are 1-finger air cushion tables: 4 units, 1800 x 650 mm Central blower: 1 unit Technical Data: Saw blade projection: 75 mm Saw carriage feed: forward 1–120 m/min, reverse constant at 120 m/min Program fence speed: forward and reverse 80 m/min (EU limited to 25 m/min forward) Automatic cutting height control; pressure beam height control Angle alignment device, min. pressure width 0 mm; max. pressure width equals full cutting length Main saw motor: 7.5 kW with pneumatic saw stroke Scoring saw motor: 1.1 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value: 13 kW Ppjdpfx Aasx Sp Sajlel Power Control CADmatic 4 – Practive control system Optimization software SchnittProfit Practive for Office Labeling package including label printer

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Pjdpfx Aaox A Thkjlspl Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Ppedpfewuck Ijx Aalol Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0-341-07-8874, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 72 mm, saw blade diameter: 350 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, main saw diameter: 350 mm, total length: 5,800 mm, total height: 2,000 mm, total width: 6,410 mm, Equipment: scorer, Panel beam saw HOLZMA type HPP 32/32/L Ppjdpfxex Sap Nj Aalol Left side execution machine Main motor 7,5 kW Pre-cutting unit, motor 1,1 kW Central side pressure device with infinitely adjustable side pressure 3 "air" tables: size 1800x600 mm 6 pcs of grippers: 3 pcs double finger stop; 3 pcs single finger stops Label printer Software for cut plan optimalization Software for CSV import

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,200 h, functionality: fully functional, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Ppedpfx Aaexytlkeljl

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Ppjdpju N Slijfx Aalsl Main saw blade projection: 75 mm No of Grippers: 7

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Ppsdpfx Aefg Ewzealjl Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm Psdpfsw Idh Hex Aalspl No of Grippers: 7

Condition: excellent (used), Year of construction: 2006, Machine available March 2026 Ppodpfsx Iv Dhjx Aalel Year of manufacture: 2006 Cutting length: 4,400 mm Cutting width: 4,400 mm 6 clamping claws (first 3 are two-finger type) 4 air cushion tables (2,100 x 600 mm) Air cushion blower with integrated frequency control (approx. 70% performance increase) Cutout & stress-relief cut program Labeling program Label printer type PICA 104 CAD layout and optimization software: CADMATIC 3.0 Automatic, stepless cutting height limitation Automatic cutting length limitation Motorized adjustment of scoring saw from operating panel Steplessly adjustable feed speed from operating panel Saw blade projection: 72 mm Saw carriage feed: 5 - 80 m/min Program pusher: 60 m/min Full-length angle pressure device Main saw motor: 7.5 kW (10 HP) Scoring saw motor: 1.1 kW (1.5 HP) Main saw blade: D = 350 x 4.4 x 75 mm Scoring saw blade: D = 200 x 4.4 - 5.4 x 45 mm

Condition: used, machine/vehicle number: 007596, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 55 mm Psdpfeuxg Ttjx Aalepl No of Grippers: 4

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Ppjdsxy Ng Repfx Aalol Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-341-07-8150, cutting length (max.): 4,300 mm, saw blade diameter: 380 mm, cutting width (max.): 3,800 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Podpfx Aoxx Svroaljpl Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Front panel loading Front-side unloading Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Pedpfsxvz T Isx Aaljpl Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Ppsdsxpu Rgspfx Aalel Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Panel saw Holzma HPP 22 Year of manufacture: 1997 Pedsxvybqspfx Aalspl Technical condition: good, machine fully operational Technical data: - Maximum panel size: 4200 x 200 mm - Saw blade projection: 140 mm - Cutting length: 4300 mm - Installed power: 26 kW

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Pedpfx Aaov N D E Rolspl Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Pedpjuwzupefx Aalspl Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8

Condition: excellent (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, HOLZMA HPP 350/43/43 from 2011 The machine is 100% efficient, dismantled and ready for transport. The machine has worked 20 thousand mth Complete documentation for the machine. We provide a start-up WARRANTY!! Pedpfxovzxa Te Aalspl Possible transport

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0-240-14-5243, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Max. cutting width: 4,300 mm MACHINE DETAILS Voltage: 400 V Ppjdexcnv Ajpfx Aalol Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available CE marking present

Condition: ready for operation (used), Technical characteristics Cutting dimensions : 4300 x 4300 mm Max Cutting height : 125 mm Main blade max. diameter 450 mm Motor 13.5 kW Scoring blade max. diameter 150 mm Motor 2.2 kW Psdpsucitbjfx Aalepl Blade carriage speed adjustable from : 10 to 125 m/min Pusher feed : 10 to 80 m/min Automatic lateral alignment device 3 air-cushion loading tables 7 pneumatic clamps Windows PC-based control CADmatic software Easy access for maintenance and blade change Quick blade change Suction requirement : 5000 m3/h Power and Motors Voltage: 400 V Pluging: Three-phased Power: 35 Kw Overall dimensions Lenght: 6900 mm Width: 8200 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Panel saw HOLZMA HPP250 320x320 cutting length 3200 mm cutting width 3200 mm 3 air tables power control year of manufacture 2007 Ppedpfsycc H Dex Aalol