Used Honing Machine for sale (84,012)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Ijdew Iquyspfx Adnja Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: good (used), NAGEL Horizontal Honing Machine with Stroke Automation HHM 90A - Honing range: 1.9-100 mm diameter - Spindle motor: 0.55 kW - Spindle speed: 95-2300 rpm - Stroke length: 0-150 mm (stepless) - Stroke frequency: 80-400 strokes/min (stepless) - Stroke adjustment range: 250 mm - Retract stroke for workpiece change: 100 mm - Net weight: 420 kg Good condition, fully functional, can be inspected and tested on site. Shipping available internationally. Inspection: Isdpfx Adjxdfhlsnea As a general note, to avoid misunderstandings, I recommend inspecting and testing the machine under power before purchase. Please ask any questions beforehand to prevent uncertainties. For general questions or to arrange an inspection appointment, I am always reachable at the phone number listed above or below. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipment via freight forwarding.

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] Iodpfxexb Em Ns Adnsa - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Ijdpew U Uh Defx Adnea Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. Iodpfxet Hwups Adnsa We have a selection of honing machines available. Please let us know what you need.

Condition: used, Technical details: honing diameter: 4-31 mm stroke: 350 mm Iedewx Shkepfx Adnsa throat: 250 mm

Condition: good (used), Year of construction: 2001, Equipped with: Iodpfxerualps Adnoa Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t Isdpowva Rnsfx Adnea dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: used, Honing machine SUNNEN MBC1804 Isdpfx Asxbtywednsa

Condition: used, Year of construction: 1984, honing diameter 12 mm Iedpfxot Hwvte Adnja stroke 40 mm throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 Iedpfswrh H Nsx Adnja workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Honing machine SUNNEN EC-35000CEM-26 Iodpjxbtyksfx Adnea

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Isdpfx Adot Hw T Sonoa dimensions of the machine ca. m

Condition: used, Honing machine SUNNEN MBC1804 Ijdpfoxbtyqox Adnoa

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm Iedpfx Ast Hwvmednoa honing length max. 500 mm max. module 5 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Honing range : Ø 0,6 – 2,5 [mm] - Spindle speed : 2000 – 7000 [RPM] - Motor power : 100 [kw] - Table dimensions : 100 x 100 [mm] - Honing oil container with pump : 12 [l] - Weight : 160 [kg] - Dimensions : 650 x 500 x 700 [mm] EQUIPMENT - Plate 2 positions - Fittings with floating frame Ijdjug U D Hepfx Adnoa

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. Iedpfst Hwzpex Adnoa * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Honing machine DELAPENA SPEEDHONE EA Iodpfx Adev R Hv Usnsa

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] EQUIPMENT Isdpfjug U Dmox Adnoa - Same as on photos

Condition: used, TECHNICAL DETAILS - Spindle number : 1 - Honing range : Ø 1,5 - 50 [mm] - Honing stroke : 0 - 100 [mm] - Spindle speed : 150 - 2500 [Rpm] Ijdpfx Ajug U Dysdnoa - Dimensions : 1550 x 800 x 1450 [mm]

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] - Speed : 1000 [rpm] Isdsvxlipopfx Adnoa - Machine floor space : 120 x 100 x 150 [mm] - Machine weight : 229 [kg]

Condition: used, TECHNICAL DETAILS - honing diameter : 1 - 12 [mm] - honing length : 40 [mm] Iedpfxsug U Dtj Adnea - 2 honing heads - 1 control head - 1 deburring unit with multispindle head

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] Iedpfxsvxlive Adnja - Speed : 1000 [rpm] - Machine floor space : 120 x 120 x 150 [mm] - Machine weight : 283 [kg]

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] Iedpfxoug U Dgj Adnsa - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] EQUIPMENT - same as on photos

Condition: used, TECHNICAL DETAILS - Manual honing diameter : 1.5 - 165 - Automatic honing diameter : 1.5 - 101 - Travel : 6 - 170 [mm] MAIN SPINDLE Iedpfx Aswdacyodnea - Spindle speeds : 200 - 3000 [rpm] - Spindle power : 4.1 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.600 x 1.220 [mm] - Machine height : 1.900 [mm] - Machine weight : 1000 [kg] EQUIPMENT - Coolant tank - Workpiece loading / unloading robot