Used Foil Cutting Machine for sale (66,861)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C Lodpfsywwq Uox Ahvehd • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, STOCK MACHINE - IMMEDIATELY AVAILABLE New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 4,000mm x 2,200mm The machine is included 24 month guarantee Lodpfeywufiex Ahvehd Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require collection within the period from 08/04/26 to 16/04/26! TECHNICAL DETAILS Lhedpfx Aeylalvshvjd X-axis travel: approx. 1500 mm Y-axis travel: approx. 4500 mm Z-axis travel: approx. 600 mm Laser power: 3.2 kW Table dimensions: 3500 x 2000 mm MACHINE DETAILS Lifting device model: TRUMPF LOADMASTER Number of suction units (lifting device): 12 Lifting device features: Light barrier system Dimensions & Weight Dimensions (L x W x H): 12000 x 7000 x 2400 mm Machine weight: 15 t EQUIPMENT Shuttle table Additional laser head Accessories Note: The laser cutting system can be transported on trucks up to 3000 mm wide and therefore does not require a special permit. External reference: 18

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Overall height: 1350 mm Width with control cabinet: 850 mm Depth: 1420 mm Motor power: 1.5 / 3.0 kW Disc diameter: 200 mm Cutting range up to: 40 mm Lhedpfoywr Alsx Ahvod

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A space needed: 820 x 1220 x 930 mm weight: 750 kg Lhodpfe Sdrfsx Ahvjd

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A Lhsdpfxedyy Dij Ahvjd electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm weight: 10 kg

Condition: ready for operation (used), machine/vehicle number: 30116, Arc current at 100% ED: 120 A Voltage: 110V electr. Connection for: 380 or 400 V Lsdpfxjga Tmys Ahvehd Required space: 1250 x 900 x 1000 mm

Condition: used, Year of construction: 2010, Lot consists of: (1) Profile wrapping machine Ledeylak Eepfx Ahvshd Technical Details: 400 V; 113 - 160 A

Condition: used, Year of construction: 2009, Lot consists of: (1) Foil cutter Lhjdpfx Aeylakrjhvod Technical Details: 400 V; 8-10 A

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Ledsywdr Espfx Ahvjhd Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Lsdpoywdq Iefx Ahvjhd Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Ideal 4850 Guillotine Machine in very good condition, manufactured in Germany. This is the newest model, currently in production. Technical specifications: Working width: 475mm Stack height: 80mm Minimum remnant: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: The machine has an electronic dimension display Electromechanical knife and pressure drive Automatic pressure synchronized with the knife’s cutting movement Front and rear table guards Side tables Lsdpoywdpwjfx Ahvohd Electronically controlled two-handed cutting start Automatic knife return from any position Optical laser cutting indicator Additional equipment includes: spare knife, cutting stick, knife changing tools including a safety handle, tapping block, and documentation.

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables Lhjdpfx Aoywdpkohved – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Ideal 5221-05 EP Digicut Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment options. Technical data: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance between the saddle and the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the function of saving individual steps to the device’s memory Hydraulic pressure beam drive, fully adjustable pressure force from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Lhjdpoywdnmofx Ahved Electronically controlled saddle adjustment knob with adjustable speed Foot pedal for the pressure „SCS” safety system, which includes: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent covers on the front and rear tables Cutting indicator Additional equipment includes: spare knife cutting stick, tool set, paper stack tapping device, pressure plate and documentation.

Condition: good (used), Ideal 4850-95 Paper Cutting Guillotine Machine in very good condition, ready for production. Lodpfx Aeywdm Nehvjhd Technical specifications: Working width: 475mm Stack height: 80mm Minimum scrap: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: Electromechanical drive for the knife, clamp, and clamp Automatic clamp synchronized with the knife’s cutting movement Transparent covers on the front and rear tables Electronically controlled, two-handed cutting start Automatic knife return from any position Optical cutting indicator Additional equipment includes: tools, cutting stick, and documentation.

Condition: used, Year of construction: 2013, Type Crack Maschine Lhjdpfsx N Nc Hsx Ahvod In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1989, Diameter max. 75 mm Dimensions (L/W/H) 800x600x1200 mm Ledpfxexrg D Re Ahvshd weight ca. 150 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Lsdpfxsm Nb Rio Ahvohd >max. piece length 340 mm

Condition: used, throat 215 mm thread M2 - M10 thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Total height 950 mm Lodpfoyv N Ddjx Ahvohd motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 2.000 mm wire feeding speed: 5 - 120 mtr./min Lodpjc Ucxfofx Ahvohd * machine is been complete new painted*

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: Leded N Rfdopfx Ahvehd -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Make: DURMA Type: HD-FS 3015 Fiber Working range X-Y-Z: 3100x1550x125 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 15 h Sheet thickness mild steel: 12 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 6 mm Sheet thickness brass: 6 mm Sheet thickness copper: 3 mm Ledpfx Ahjdx Ewgovjhd Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 141 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area standard L/W/H: approx. 10000x7000x2300 mm Weight: approx. 13700 kg Standard equipment Manual single table Sinumerik 840D control system Manually focusing Precitec Procutter F125 focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Chip conveyor Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting either Metalix or Lantek Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 2000 Watt including cooler Filter, compact dedusting Vanterm Automatic shuttle table Automatic laser head positioning Cloud license Air conditioning in the control cabinet The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration at our Staufenberg site. We will be happy to send you further information on request.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head Ledpfxorkntco Ahvshd OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Lodpedx Nfwefx Ahvshd Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2022, This price applies exclusively to the demonstration machine (freight and assembly extra). Machine Dimensions: • (L x W x H) 5,308 mm x 2,810 mm x 1,860 mm, Length with filter: 6,582 mm. Technical Details: • Year of manufacture: 2022 • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 2 kW • Z-axis travel: 125 mm • Max. simultaneous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 14 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm • Cutting capacity: • Steel: 12 mm • Stainless steel: 6 mm Lhodod R Uzrspfx Ahvjd • Aluminum (AlMg3): 6 mm • Brass: 6 mm • Copper: 3 mm Standard Equipment: • Control system: Bosch Rexroth • Laser head: Precitec light Cutter F 125 Focus (manual) • Sheet metal thickness detection and measuring system • Positioning laser diode • Central lubrication unit • Chip tray • Software: Lantek or Metalix CAD/CAM software with AutoNesting • Remote control: Remote maintenance • Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Other machines are available for demonstration at our Staufenberg facility. Further information is available upon request.