Used Film Cutter for sale (4,516)

Condition: ready for operation (used), Year of construction: 1992, A Kilia bowl cutter is available. Knife shaft speed levels: 2, bowl speed levels: 2, bowl volume: 65l, knives: 6. The mixing cycles of the machine are non-functional. An on-site inspection is possible. Djdpfx Aoxfvhrofiowc

Condition: used, Only for export! ECRM Mako36, A3 imagesetter, HQ-RIP with PC Dedpfx Afjxft R Dsiswc

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Dodjwg Sgcspfx Afiewc

Condition: excellent (used), Year of construction: 2016, Manufacturer: PIERI (made in Italy) Year of manufacture: 2016 (commissioned in 2017) Dwedsw H Rv Nepfx Afiec Type: AVR400 fully automatic Capacity: approx. 60–90 pallets/h

Condition: excellent (used), MAREL I-CUT 130 PORTION CUTTER The I-Cut 130 Portion cutter is the ideal machine for high-value portioning of meat. Whether cutting product for the supermarket, for restaurants or for fast food, the I-Cut 130 is a flexible tool suitable for all needs and throughputs. Cutting programs The I-Cut 130 Portion cutter cuts fresh deboned meat into fixed weight and/or fixed length portions. It offers a large number of innovative cutting patterns. These are displayed real-time, allowing users to change or adapt cutting programs during production. I-Cut 130 will also calculate the optimum cut in a given situation. Cutting and batching is made easy; high value cuts can be prioritized and orders controlled. The machine’s laser and mirror vision system as well as the processing software provides superior programming flexibility and a variety of specialized cutting patterns, while guaranteeing accuracy and optimum usage of raw materials, with minimal giveaway. Intuitive, user-friendly and multilingual operation via 15” easy-to-operate touch. INNOVATIVE PROCESSING SOFTWARE The new generation processing software provides superior programming flexibility and a variety of specialized cutting patterns, while guaranteeing accuracy and optimum usage of raw materials. EASY INTEGRATION IN THE FACTORY’S PROCESS FLOW Dsdsxftfhspfx Afijwc The I-Cut 130 can be easily integrated with other Marel equipment for optimized cutting and batching. This ensures meat processors can operate more efficiently, increasing output and enhancing factory-wide sustainability. High yield and extreme precision Minimum waste means maximum profit Wide variety of innovative cutting patterns Swiveling 15 inch touch screen Adjustable cutting angle; 45, 55, 65 or 90 degrees Up to 1,000 cuts per minute Technical Details: Model: Marel I-Cut 130 Year: 2017 Max. product length: 750 mm Max. product width: 270 mm Max. product height: 150 mm Max. cutting speed: 1.000 cuts/min Belt speed: 20-500 mm/sec Power: 400V / 50Hz / 8kW Machine dimensions (LxWxH): 3.900×1.315×1.900 Machine weight: 600 kg.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Dodpfsv Amw Njx Afiowc Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: used, Roll width up to 320 mm and 620 mm. Unwind station for rolls up to ø750 mm. Shear cut knife system on knife shafts consisting of upper and lower knife. Variable speed drive up to 100 m/min. Rewind station for rolls up to ø500 mm. For light abrasive materials like micro-finishing films, tapes and other special qualities. Unwind station: Unwind station for rolls up to ø750 mm. Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm. Pneumatically adjustable unwind brake. Cutting system: Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width. Rewind station: Dwedpfx Afjxckxyjisc Rewind station for rolls up to ø500 mm. Rewinding with two pneumatically expandable rewind shafts for cores with ø75 mm and slots. Note: All information according to manufacturer's description; no guarantee

Condition: good (used), Indexable inserts milling cutter, Sandvik Coromill 200 Dwodpfx Afjip Dyioisc Diameter 200 mm with packing

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Dedsxciumspfx Afiowc Weight approx. 50 kg Good condition

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005 Dodpfxsxfbfvo Afiswc

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Dodpfx Afexcg H Heiowc Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: new, Year of construction: 2024, neu 2024 Dwsdpfx Afjwva Iasioc 2517 prompt, Zwischenverkauf v Deutschland 40130 € 705.17 € 1 36920 € 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction diam. 160 mm)

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4.500 W Voltage: 220 V Open circuit voltage: 320 V Amperage: 16 A Dedpfebfa Hwex Afiswc Insulation type: F Cooling type: F

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg Djdpfsvqbdyex Afiswc

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg Dedou Rimmepfx Afijwc good condition

Condition: excellent (used), functionality: fully functional, Seydelmann K 504 Vacuum Bowl Cutter Vacuum bowl cutter Brand: Seydelmann Model: K 504 Voltage: 400V 50Hz Dwodpfjxd Dttsx Afiec The set includes a pallet with additional spare parts and cutting knives. The Seydelmann K 504 vacuum bowl cutter is designed for cutting, mixing, and emulsifying meat fillings as well as other food products. Thanks to the use of a vacuum system, it is possible to achieve a homogeneous filling texture while removing air bubbles, improving the quality and shelf-life of the final products.

Condition: new, Technical data: Dsdpfx Aed R S Ndjfiswc Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without disassembly) - All relevant parts of the machine, e.g. machine stand, table, milling head, housing, etc. are made of voltage-free MEEHANITE® - quality casting (FC 30) and are often ribbed to give the machine maximum stability and working accuracy. All guideways are TURCITE®-B coated - All machined surfaces in the work area such as guides, table surfaces, T-slots, etc. are hardened and precision-ground. - The powerful drive transmits the power of the main motor via belts to the gearbox. - All axes have their own DC servo motors. These allow for a sensitive

Condition: used, Year of construction: 1997, Overview This bowl cutter made by the German manufacturer Seydelmann was built in 1997. The machine is maintained and ready to use. With external electrical cabinet and extra knifes. Technical Details Volume: 60 liter Operating voltage 400V/ 50Hz Rated power 21 kW Scope of delivery Bowl cutter | Seydelmann | K 60 ras | 1997 Dsdpexcb Eqofx Afiewc

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, laser power: 6,000 W, working length: 6,000 mm, working width: 2,000 mm, For sale: Eagle Inspire 2060 laser cutting machine. Year of manufacture: 2016. eVa laser cutting head – replaced in 2021. Laser power: 6 kW. The machine is equipped with a Crane Master loading/unloading system. Sheet nominal size: 6000x2000 mm. Machine in very good condition. Disassembly and transport included in the price. Djdpfx Aoxdxxwjfiowc

Condition: new, Year of construction: 2025, CORMAK PT310ECO Thickness and Surface Planer with Spiral Cutter Block – Precision and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser engineered for high finish quality, reliability, and low noise levels. Thanks to its spiral cutter block with 30 replaceable carbide inserts, the machine delivers exceptionally smooth surfaces with significantly reduced vibration and noise. Its stable construction and powerful motor make it a versatile solution for professional woodworking—both in carpentry shops and in artisan workshops. Key Advantages Spiral cutter block – 30 inserts (310 × 25 × 3 mm) provide long tool life, precise planing, and reduced noise levels. Massive cast iron work tables – absorb vibrations and ensure stable material feed. High power output – 2.2 kW motor (S1) / 2.6 kW (S6) ensures consistent performance during demanding operations. Large working area – 310 mm planing width and 180 mm height capacity for various workpieces. Effective chip extraction – Ø100 mm extraction port allows easy connection to dust collection systems. Construction and Technology The PT310ECO is equipped with a spiral cutter block of 75 mm diameter, ensuring smooth operation and significantly longer durability than traditional knives. Each insert can be rotated four times, greatly reducing maintenance and operating costs. The planer-thicknesser features wear-resistant cast iron tables: 1290 × 310 mm (planer) and 540 × 310 mm (thicknesser). The adjustable fence angle between 90° and 45° allows for accurate guiding of materials even at an angle. Precision and Performance Maximum cutting depth: Planing mode: 3 mm Thicknessing mode: 4 mm Cutter block rotation speed: 5,500 rpm The machine’s rigid frame enables surfaces that are ready for gluing, lacquering, or further processing. A reliable thickness planer for both mass production and small batch work. Applications The PT310ECO is the ideal solution for: Professional carpentry and furniture workshops Prototyping labs and training centers Industrial maintenance departments Dedpfxow Ab Afs Afiswc Technical schools and trade colleges Standard Equipment Spiral cutter block with 30 inserts Cast iron work tables Cutter head guard Ø100 mm dust extraction outlet Feed switch and emergency stop switch Optional Equipment Mobile base Dust extractor Technical Specifications Specification Value Planer table dimensions 1290 × 310 mm Thicknessing table dimensions 540 × 310 mm Spiral cutter block diameter 75 mm Cutter block speed 5,500 rpm Cutting inserts 310 × 25 × 2.5 mm Fence tilt angle 90°–45° Chip extraction outlet Ø100 mm Maximum thicknessing height 180 mm Max. cutting depth 3 mm (planing) / 4 mm (thicknessing) Motor power (S1 / S6) 2.2 kW / 2.6 kW Maximum workpiece width 310 mm Weight (gross) 200 kg

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg Dwsdpfjud U Sfex Afiec good condition

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) Dodpjxcalvofx Afiowc With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 Working area (W x D): 813 x 508 mm CO2 laser power: 80W, 120W Fiber laser power: 30W, 50W Max. engraving speed: 3.55 m/s Operating mode: Optimized modes, including raster, vector and combined

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 19,125 h, machine/vehicle number: 269, laser type: fiber laser, laser hours: 8,003 h, laser power: 6,000 W, laser wavelength: 1,060 nm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, working length: 4,000 mm, working width: 2,000 mm, Equipment: CE marking, documentation/manual, For sale: Bystronic BySmart Fiber 4020 laser cutting machine. Year of manufacture: 2021 Cutting hours: 8,003 Operating hours: 19,125 The machine is in excellent condition, continuously in operation and serviced by Bystronic authorized service. Available for inspection while in operation. Specifications: Laser power: 6,000W Sheet nominal size: 4,000 x 2,000mm Load capacity of transfer table: 1,900kg Dwedjxdxfdjpfx Afijc Table exchange time: approx. 28s Processable sheet thicknesses: Steel DC01: 0.8–3.0mm Steel DD11: 4–12mm Ruukki 250 C Laser steel: 15–25mm Hot-dip galvanized steel DX51D: 0.8–5mm Electro-galvanized steel DC01+ZE: 0.8–5mm Stainless steel X5CrNi18-10: 0.8–30mm Aluminum: 0.8–30mm Copper: 0.8–12mm Brass: 0.8–15mm

Condition: new, Year of construction: 2025, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Professional carpentry and furniture workshops Prototyping labs and training centers Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Dwodpow Ab Twofx Afisc Gross weight 200 kg

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Dwsdpfx Afeu H R Iqeiec Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition