Used Ending Range for sale (20,157)

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Kjdpfx Aoxmvgkjh Eedt Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Kdodpefh Skpsfx Ah Eot Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Weight: 625 kg Included with the machine: Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - 40mm insulated wall - PVC floor - Supports Net: €6,638.66 / Gross: €7,900.00 Article number: FVK115402023.02 Technical data: • Brand: Other • Model: VK 15402023 • Vehicle type: Sales trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 397 x 196 x 230 cm • External dimensions (L x W x H): 552 x 205 x 294 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 842 kg • Payload: 658 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Single axle • Floor made of plywood • Side walls made of very thick steel sheet sandwich panel, 40 mm thick • Sales flap on the right side with pocket storage Kdodjzy Dw Dopfx Ah Ejt • Lockable gas door • PVC flooring • Door in the front wall, can be locked from the inside and outside • Step on the drawbar • Support wheel with clamping bracket • 4 scissor supports mounted incl. crank • Maintenance-free rubber spring axles from KNOTT • Reverse driving automatic • KNOTT inertia coupling and parking brake • Plastic fenders • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2025, functionality: fully functional, NEW – PBE Series Automatic Panel Bending Center | 5 models available | Immediate delivery from stock Condition: New, Year of construction: 2025, Functionality: Fully operational TECHNICAL SPECIFICATIONS: Max. bending length: 1,000 mm (PBE-1000) – 3,000 mm (PBE-3000) | Customizable Max. bending width: 1,000 mm (PBE-1000) – 1,400 mm (PBE-1400) | Customizable Max. bending height: 170 mm (all models) | Min. 110 mm for t-1 mm available on request Minimum workpiece size (all four sides): 110 mm (PBE-1000) / 200 mm (PBE-1400 to PBE-3000) Minimum workpiece size (one side): 100 mm (PBE-1000) / 170 mm (larger models) | Hemming: 130–180 mm Bending angle: ±0–180° (all models) Minimum sheet thickness: 0.35 mm MAX. HOLDING FORCE (Standard / Heavy): PBE-3000: 115 T / 155 T PBE-2500: 80 T / 115 T PBE-2000: 38 T / 53 T PBE-1400: 28 T / 38 T PBE-1000: 20 T Kdedpfsymcvtex Ah Est MAX. MATERIAL THICKNESS (Standard / Heavy): Material PBE-3000 PBE-2500 PBE-2000 PBE-1400 PBE-1000 Stainless Steel (SS) 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 mm Aluminium (AL) 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 mm Mild Steel (MS) 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 mm Power supply: 380V 50/60Hz (transformer available as an option) MACHINE FEATURES: • Automatic multi-sided bending – no tool changes required • Universal tooling automatically adjusts to programmed dimensions • Positive and negative bending in a single setup: arcs, hemming, combined angles • Bending speed 0.2 s/bend – 3× faster than conventional CNC press brake • Intelligent CNC control system for consistent, repeatable results • Single setup positioning – first-edge shearing error is controlled • Multiple positioning references selectable according to workpiece geometry • Energy-saving design – reduces labor and tooling costs TYPICAL APPLICATIONS: Fire doors, elevator panels, computer cases and enclosures, furniture, integrated kitchens, HVAC covers, commercial cold chain equipment, lighting, storage shelving, ceiling panels, air purifiers INCLUDED SERVICES: • 12-month warranty • Spare parts availability • Technical support and commissioning • CE documentation available upon request Offered by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK, and EU. Price on request.

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg Ksdpfx Aheivqrbj Ejdt - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. Kdodpfxogvkmrs Ah Eet • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 20 (d 1200) mm I-beam section - upend 80 x 25 (d 2100) mm L-beam 50 x 50 x 6 (d 1000) mm bar material - diameter 40.0 (d 800) mm square material 60x60x3 ( d 4000 ) mm rectangle 80x30x3 ( d 6000 ) mm roll surface width 177x60 (18x5 Nut) mm bar material dia. max. 70 x 2.0 (d 1600) mm tool adaptor 60.0 mm turning speeds 6.4 m/min. oil volume 80.0 Liter total power requirement 4.75 kW weight 1080 kg range L-W-H 940 x 1260 x 1390 mm Kdodoxcuipopfx Ah Ejt Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Kedjxcui Njpfx Ah Eodt Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Kdjdpfxoxcuxdj Ah Ejt Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: excellent (used), Year of construction: 2018, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35.0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4.3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1.5 kW Kdodpfx Ahszyvbne Eet weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Kdsdpfx Ajxabu Heh Est Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: Kdedpfx Aoxab Tcsh Est - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals Kjdpfexacfgjx Ah Eodt * Such as copper and aluminum

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA Kdodpfjxabntjx Ah Eot

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Kedpfx Aex D Ilysh Esdt Extra Information Machine still under power Technical Specification Bending Length 4080 mm Dimensions Machine Depth 5000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2520 CNC sheet metal bending machines are characterized by their high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, control cabinets, power electronics, elevators, etc. Technical data: - automatic tool change - bending length: 2500mm - maximum sheet width: 1500mm - max. diagonal length: 2800mm - max. bending height: 200mm Ksdpfjzyadyox Ah Ejdt - max. material thickness: stainless steel 1.2mm / aluminum 3mm / structural steel 2mm - min. sheet thickness: 0.35mm - possible angles: 0°-180° - inner radius: 0.8-1.2 - Dimensions: 5.4m x 4m x 2.9m - Weight: 19500kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for more than 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: new, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_4, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Kdodpfxozyl Hms Ah Eot 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg Kjdpfezvw Rpox Ah Esdt

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - Low loading platform - Supports - 50mm insulated wall Net: €10,882.35 / Gross: €12,950.00 Article number: VES227502023.01 Technical data: • Brand: Vezeko • Model: VEA 27.50 • Vehicle type: Sales trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 500 x 200 x 235 cm • External dimensions (L x W x H): 659 x 215 x 288 cm • Loading height of the floor: 41 cm • Permissible total weight: 2,700 kg • Tare weight: 1,182 kg • Payload: 1,518 kg • Chassis: High loader (wheels under the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Overrun device from ALKO • Floor plate made of multiplex • PVC covering on the floor • Side walls made of very solid steel sheet sandwich, 50 mm thick • Outer layers of the box body made of galvanized and additionally powder-coated steel • Outer layer silver and inner layer white • Sales flap on the right side • Door in the front wall, lockable from inside and outside • Footboard on the drawbar • Support wheel • 4x scissor supports mounted including crank • Reverse assist • Internal, built-in wheel arches • Plastic fenders • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ Kdodpfjzy Algsx Ah Est - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop - for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: side flap, sandwich panel construction Equipment: - PVC floor - Supports - 40mm insulated wall Net: €6,344.54 / Gross: €7,550.00 Article number: FVK115302023.52 Technical data: • Brand: Other • Model: VK 15302023 • Vehicle type: sales trailer • Vehicle condition: new vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 297 x 196 x 230 cm • External dimensions (L x W x H): 452 x 205 x 294 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 680 kg • Payload: 820 kg • Chassis: high-bed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-drawbar, hot-dip galvanized • Single-axle • Floor made of multiplex • Side walls made of very sturdy steel sheet sandwich, 40 mm thick • Sales flap on the right side with pocket shelf • Lockable gas door • PVC covering on the floor • Door in the front wall, lockable from inside and outside • Step on the drawbar • Support wheel with clamp • 4x scissor supports mounted including crank • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • Plastic fenders • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific requirements! _____ Kedpfx Ajzy Dlush Eodt - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, KUKA smartPAD with 0.25 m / 10 m cable Article No.: 0000168334 / 0000231854 / 0000216801 Professionally serviced and refurbished KUKA smartPAD, available with 0.25 m or 10 m cable and prepared for immediate use. Each teach pendant is thoroughly inspected, repaired where necessary and fully function tested before being released for stock. Depending on its condition, worn or damaged components such as the keypad, touchscreen, LCD display, cable or other internal components are replaced to ensure reliable operation. Our goal is not simply to make the panel operational, but to restore its functionality so that all controls, buttons, touchscreen functions and safety elements operate correctly and reliably. Technical information: Manufacturer: KUKA Component: Teach pendant Model: smartPAD Cable length: 0.25 m / 10 m Article No.: 0000168334 / 0000231854 / 0000216801 Condition: Professionally serviced / refurbished Kodpfx Ahozyy I Es Ejdt Testing: 100% function tested Warranty: 12 months. The smartPAD is in stock and ready for installation as a replacement teach pendant for compatible KUKA robot systems.

Condition: used, Year of construction: 2002, Max. bending length 3000 mm Max. prebending 65 mm Max. rolling capacity 77 mm Top & bottom rolls dia. 700 mm Side rolls dia. 570 mm 4-roll Fully hydraulic machine Kdsdpfezxc Dyjx Ah Eet Hydraulic drop end Motor power 163 Kw CNC-control (upgraded in 2121) Equipped with: 1 hydr. top support (9000 mm diameter) installed in 2014 NOTE !!! The hydraulic side table shown on photos - is NOT included !!!

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max Kjdpozwg Rzofx Ah Eedt - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; Kdodpfx Ajzgv Hdsh Est A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: new, Year of construction: 2026, - Minor transport damage (small dent on the control cabinet, see photo) - Shaft diameter: 60 mm Kdjdpfx Ahez Aiuts Ejt - The two lower rollers are adjusted hydraulically - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V