Used Electric Impact Drill for sale (36,694)

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Gsdpfx Ae Aiirxoh Ejbw Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed - Thread-cutting device - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed - Thread-cutting device Godpfx Aj Aiir Aeh Eobw - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker Gbode Ah Eyuopfx Ah Esw • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Double finishing machine 842 Multimatic with control, manufactured in 09/2006, original price €20,110. - Garment former and trouser topper rotatable on a single column - Finishing process in a closed cabin - Integrated cabin extraction system with automatic control - Doors close automatically - Flexible processing of different garments and sizes - Computer control with nine freely programmable memory slots - Airflow regulation for particularly delicate garments - Space-saving and minimal impact on the working environment due to the finishing process - Can be heated with external steam or fully electric with a built-in electric steam generator Are you looking for an all-in-one solution for jackets and similar items? - Multimatic double finishing machine 842 With the Multimatic double finishing machine 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a trouser topper. Both devices are rotatable and mounted on a single column. For finishing, the previously loaded element (form finisher or topper) is swiveled into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, small footprint. Gbedpfogtiddjx Ah Esw Manufactured in 09/2006, original price €20,110. The machine is in perfect working order. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), FUJI Electric A50L IGBT module, 6MBP50NA060, 50A, serial number 7535, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfx Aho Agrbxo Eobw

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Gbedpfezuvyasx Ah Esw Year of manufacture: 2014, available from the end of August.

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Gsdpfx Ahsz D Egrs Eebw Z 400 mm Including coolant system Water bath machine

Condition: ready for operation (used), FUJI Electric A50L-0001-0125#A IGBT module 6DI50A-060, 6 x 50A, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfxe Agrbuj Ah Eebw

Condition: used, 1 kW // 2,700 rpm Foot-operated Technical data: Gedpfeztvx Hjx Ah Esbw - Engine: 1

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): Gbodpfovnq Txox Ah Ejw W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. Gbjdpfx Ahexfiwyj Eow TECHNICAL SPECIFICATIONS: Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Maximum speed: 80 m/min Acceleration speed: 0.8G Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker Gsdpfj Afnhzox Ah Eobw • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Gbjdpfx Aezlivpoh Ejw Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: excellent (used), Year of construction: 2022, operating hours: 819 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 3,030 mm, total width: 2,687 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, Wire EDM machine MV2400S Year of manufacture: 2022 Available immediately Gbjdj Aaz I Depfx Ah Ejw

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units Gbedpfx Aeg Urn Eeh Esw The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Gedpfxexu Ewno Ah Eebw

Condition: used, Year of construction: 2008, Column drilling machine, Alzmetall Type/Model: AX 3/S Condition: Used Year of manufacture: 2008 Technical data: Drilling capacity steel E335: 40 mm Thread cutting steel E335: M 24 Short spindle: MK 3 Overhang: 292 mm Surface area of machine table: 510 x 360 mm Distance spindle-table min./max.: 117 / 701 mm Column diameter: 115 mm Spindle stroke: 120 mm Feed: manual Speed range, continuously variable: 160 - 2,250 1/min Motor power: 1.5 / 1.9 kW Connection: 400 V Machine dimensions L x W x H approx.: 650 x 950 x 1870 mm Weight approx.: 340 kg Equipment/Features: - Operator foot with T-slots - Continuously variable speed adjustment - Machine lamp - Coolant foot with pump - Thread cutting device with foot pedal - Emergency stop button - Drilling depth stop - Digital speed display - Drill chuck Albrecht 1 - 13 Godpfx Ahezym U Ss Eobw - CE - Operating manual, electrical documentation Inquiry item: Transport costs in a separate offer.

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Gsdjz S Upmspfx Ah Esbw Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. The machine has undergone a full inspection. Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill The latest model from the manufacturer Stago; this machine comes from the office of a large company. The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Gbsdez S Uwqopfx Ah Eew Power supply: 380V. Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Adjustable spacing between the heads. The drill has undergone a full inspection. Includes drill bits and tools.

Condition: good (used), Nagel Citoborma 111 paper drill The unit is 100% functional and in very good condition. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Robust construction – weight: 35 kg. Gbjdpfx Aez S Ui Hjh Eow This is one of the latest Citoborma drill models, currently still in production. Power supply: 230V. Drill bit diameter: 2–9 mm. Stack height: 50 mm. Includes drill bits, a new drilling stick (cutting strip), and an instruction manual. Made in Germany.

Condition: excellent (used), Year of construction: 2013, Dry-type cast-resin distribution transformer – manufacturer Schneider Electric (France), Trihal model; rating 2000 kVA, 22 (2x±2.5%)/0.42 kV, Dyn1, IP00 (no enclosure), Al-Al windings, year of manufacture 2013, functional. Gsdpfxoz E A Ucs Ah Eebw

Condition: used, Year of construction: 2008, Medium voltage switchgear metal clad air insulated, disconnectors SF6, 22kV 630A 16kA producer Schneider Electric, type SM6 IM, QM panels Godpfx Asyryv Ish Ejbw

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: Gedpfx Aey A Sgnjh Eebw - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: refurbished (used), functionality: fully functional, power: 568 kW (772.26 HP), rotational speed (min.): 1,502 rpm, input voltage: 520 V, input current: 1,166 A, type of input current: DC, protection type (IP code): IP23, TT Electric DC motor Type: LAKC4355K Design: IM1001-B3 Standard: IEC60034-1 Duty class: S1 Input voltage: 520 V Input current: 1166 A Gbodpfjxg Rgrox Ah Eew Field voltage: 220 V Field current: 9.4 A Rated power Pn KW: 568 kW RPM: 1502

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t. Godpfeu T Ty Hox Ah Eobw