Used Double Shaft Crushe for sale (18,182)

Condition: new, Year of construction: 2025, functionality: fully functional, RSS 2-shaft shredder 600 series 2 x 7.5 kW rotor length: 600 mm blades: 30 mm The machine can be configured to your requirements, including electrical control cabinet. Delivery time by arrangement. Infeed and discharge conveyors available on request. This shredder is ideally suited for destroying items such as hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. On arrangement, we can also deliver and install the machines. Lhsdpfx Adjw Ry Ale Njb Please respond with your name, company name, and a valid telephone number for a prompt reply.

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel Lodpfxsmpfwds Ad Nshb SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: excellent (used), Catalogue number 7867 TECHNICAL DATA - Feed hopper inlet: 1000x1250mm - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm Ledpfxjyab H Rj Ad Nohb - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: – Max. blade diameter: 350 mm – Spindle diameter: 30 mm Lhsdpsyaazyofx Ad Nsb – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm – Weight: ~1000 kg

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW Lhjdjx U Tvhepfx Ad Nsb - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: excellent (used), Catalogue number 7860 TECHNICAL DATA - Track width: 370mm - Roller width: 400mm - Saw blade diameter: 225-350mm - Bore diameter: 80mm - Max cutting height: 120mm - Table width with clearance: 670mm - Table length: 1650mm Top section: - Kickback devices - Slip-type steel feed roller - Kickback devices - Slip-type steel feed roller - Saw spindle - 3 pcs slip-type steel pressure rollers Bottom section: - Kickback devices - Track - Central lubrication - 2 feeding speed options + stepless adjustment, 1.5kW - Main motor: 30kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 2200x1550x2100mm - Weight approx.: 3000kg Ledpfxox U Tmmj Ad Nehb ADVANTAGES – Italian-made – Stepless speed adjustment – Upper control panel – With laser – Used multi-blade saw, very good condition Net price: 55,900 PLN Net price: 13,300 EUR (depending on exchange rate 4.2 EUR) (Prices may change with higher exchange rate fluctuations)

Condition: used, Year of construction: 2003, used, good condition Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Ledpfxsyclxpe Ad Nehb Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Max. cutting height: 280 x 50 mm Max. blade diameter: 420 mm Tiltable manually 45° Linear feed pneumatic Digital displays for cutting length 4 x pneumatic workpiece clamps - 2 x horizontal, 2 x vertical Horizontal cylinders: 2 Vertical cylinders: 2 Required space approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, loaded on truck, unpackaged Transfer in as-is condition as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, CNC 5-axis Gantry Milling Machine BELOTTI Eureka 4014 (4000x1400mm) 5-axis milling machine / machining center Belotti Eureka 4014 Model 3414. Year of manufacture 2001. Machine in stock, in good condition, fully functional. Available immediately, including a refurbished spare 4kW spindle, software, and complete documentation. Primarily intended for trimming and milling 3D parts – plastic, carbon, laminate, MDF, wood, aluminium, etc. Ljdpeycin Iefx Ad Nohb Spindle speeds: 18,000/600Hz – 24,000/800Hz Transport can be arranged. Axis travels:    • X-axis: 4,000 mm    • Y-axis: 1,400 mm    • Z-axis: approx. 1,100 – 1,200 mm

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 3,476 h, OM Crusher Apollo Year 2004 Maximum production: 240 t/h – Minimum production: 35 t/h Hydraulically adjustable jaw crusher Feed opening size: 1050x730 mm Lhodpfx Adjycik Ns Nsb Discharge opening adjustment: 35–145 mm 6-cylinder diesel engine, 186.5 kW Operating hours: 3476 Good condition Immediately available We consider trade-ins of vehicles of all makes—MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA—with CIFA, SERMAC, PUTZMEISTER equipment; or earthmoving machines from CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: new, mileage: 1 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, Year of construction: 2026, Number of doors: 6 Cab type: double Number of cylinders: 4 Engine displacement: 2,200 cc Overall condition: very good Technical condition: very good Lodpeycibnsfx Ad Nshb Optical condition: very good Damages: none Warranty: none

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts Ljdjychwzepfx Ad Nohb - Special shafts - Customer-designed shafts - Spare parts - Knives Concrete / Paddle / Star / Metal / Electro and many more!

Year of construction: 2014, condition: like new (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps Lhedpfjycht Nex Ad Njb - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Electronic double mitre saw with automatic feed of the movable cutting head, driven by a brushless motor with numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30' (external), or via a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: the rotation of the heads around the horizontal axis is performed by pneumatic cylinders, with adjustable angles ranging from 90° to 22°30' (external). Intermediate angles are set using special manually adjustable stops. The mobile units are equipped with integrated pneumatic drop-down safety devices for the working area. Pneumatic intermediate support The pneumatic intermediate support is particularly useful when cutting lightweight profiles of considerable length. In such cases, the pneumatic support automatically provides ideal support for the profile. Additional clamp for profile support on roller conveyors Lhodjw Svxlspfx Ad Neb After each cut, the remaining short profile section tends to fall onto the roller track, posing the risk of coming into contact with the saw blade edge while the cutting phase is ongoing. This movement can potentially damage both the workpiece itself and the freshly cut section. The additional vise installed on the roller conveyor prevents this issue by securely holding the profile throughout the entire cutting operation. Year of manufacture: 2019, as new! The saw has barely been used and protective film is still present on the printer and scales! As the saw unfortunately does not have a cut counter, it is not possible to state exactly how many cuts have been made. However, it is immediately apparent upon inspection that the saw is virtually as new and has seen very little use. It was used by the previous owner solely for training purposes! LCD display with backlighting Prepared for connection of an industrial label printer USB port Single-cut operation Storage for 99 profile correction values and automatic calculation of cut length for mitre cuts Storage for 20 cutting lists entered via keyboard (50 sets each) Storage for 10 cutting lists (100 sets each) imported from an external PC via RS232 serial interface MACHINE FEATURES Position detection of the movable unit via direct measuring system with magnetic tape 2 carbide-tipped saw blades, 500 mm diameter Pneumatic full safety covers over the cutting area 2 pneumatic horizontal clamping devices with low-pressure safety system Profile support roller conveyor Lubrication system: mist spray device or minimum quantity spraying device Cuts with saw blades Ø 500 mm in mitre range from 22°30' (external) to 90° Manual profile support Prepared for automatic start of chip extraction system MG4 Two standard profile inserts Metric scale Label printer incl. peel-off function Long cut Shortcut Cross cut Macro Automatic cut Software package pro

Year of construction: 2012, condition: ready for operation (used), I sell a used bender for double glazing frames. Lhodpfxencd Dqj Ad Njb

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Lsdpsvi I Nmefx Ad Nshb Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Lsdpfxexnlgco Ad Nehb

Condition: used, mileage: 50 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, fuel: diesel, color: black, emission class: euro6, Year of construction: 2025, Equipment: ABS, UVV, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, second-hand vehicle warranty, sliding door, traction control, truck registration, ON-BOARD COMPUTER, air conditioning, cruise control, leather gearshift/selector lever, height/length adjustable steering column (steering wheel), soot particle filter, central locking with remote control, sliding door for loading/passenger compartment on the right, low emissions according to Euro 6d-TEMP emissions standard, audio system: radio with USB and Bluetooth hands-free system, reversing camera, audio system 13: digital radio reception (DAB / DAB+) with 4-function display, heated windscreen, audio system: radio with 12-function display, 360° camera system, electric parking brake, second key with remote control, audio navigation system, electric folding exterior mirrors, technology package 6P, anti-lock braking system (ABS), electric exterior mirrors. adjustable and heated, fog lights, parking pilot system front and rear, electric windows, remote control for auxiliary heating / additional heating, airbag on the passenger side, exterior lights at the top of the rear LED, steel rims 6.5x16, metallic paint, 2nd battery, cornering light in the headlight, storage in the driver's cab roof lining, ACC, trailer stabilization program (TSA), hill start assist, indicator light integrated in the exterior mirror, rubber floor covering in the loading / passenger compartment, brake assist, docking station (MyFord Dock), entry lights, electronic brake force distribution (EBD), electronic stability program, electronic. Traction control, sliding window in cargo/vehicle compartment, 2nd row left, sliding window in cargo/vehicle compartment, 2nd row right, FordPass Connect including eCall, 6-speed transmission, 180-degree rear wing doors, heating with recirculation, high roof, intelligent acceleration control, Isofix child seat mounts, cold start package, body/structure: double cab, body/structure: large van, automatic climate control, radiator grille with chrome strip, LED cargo area light, leather steering wheel, 2.0 liter engine - 125 kW TDCi CAT, My Key - programmable second key, Active Park Assist, radio... Subject to changes, prior sale and errors. Lhedpfx Aewg Sw Ied Nob

Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 7, loading space length: 3,100 mm, loading space width: 2,100 mm, Year of construction: 2025, NEW VEHICLE AVAILABLE FOR IMMEDIATE DELIVERY, Ford Transit 350, Model Year 2025, 130TDCi Euro 6E, - 3,500 kg GVW, double cab, 7 seats. - Trend trim, equipped with: Auto A/C, SYNC 4 Touchscreen with Bluetooth, Apple CarPlay and Android Auto, front parking sensors and rear-view camera, emergency braking assist, lane-keeping assist, traffic sign recognition, cruise control, quick-clear heated windscreen, heavy-duty 235/65/16 tyres. - Dropside body with aluminium side panels and marine plywood floor (external dimensions: 3100 x 2100 mm). Ladder rack/cab protector included. _____ List price: €48,100.00, Ford discount: - €13,000.00, CARLO MAURI incentives: - €2,600.00, promotional price: €32,500.00, excluding on-road costs, IPT tax, preparation kit, tyre disposal fee, VAT. _____ CARLO MAURI S.r.l. - Tel. 031.699.049 - Sales staff: Davide, Emanuele, Luca, Giuseppe. - Lurago d'Erba (Province of Como), Lombardy Opening hours: Monday to Friday: 8:30am – 12:15pm / 2:00pm – 7:00pm Saturday: 8:30am – 10:30am – By appointment from 10:30am to 5:00pm – Test drives available by appointment. - Custom financing options available. Carlo Mauri Srl declines any responsibility for potential unintentional errors in this ad, which does not constitute any contractual obligation. Prices shown exclude VAT. Ljdpfx Adew Hxlfs Njhb

Condition: used, mileage: 294,000 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,300 mm, loading space width: 2,200 mm, Year of construction: 2017, - Used Truck: Ford Transit 350 Double Cab, 7 seats, with Fixed Flatbed. - Year: 2017, Engine: 2.0 TDCi 130hp Euro 6, 6-speed gearbox, Km: 294,000. - GVW: 3,500 kg, Payload: 1,000 kg, Rear twin wheels, Reinforced rear leaf springs. - Equipment: Fixed flatbed, exterior dimensions 3,300 x 2,200 mm, aluminum side panels h. 400 mm, front steel panel, multilayer loading platform, front stake rack with cab guard mesh, 4 rope tightening winches, 1 tool box. - Trend trim, features: Air conditioning, Radio-Bluetooth with USB, Cruise control, LED daytime running lights, Fog lights, On-board computer, Central locking, Two keys, Spare wheel. Lhodpjxu Ualsfx Ad Neb - Bodywork in fair condition, intact interior, fully operational mechanics. - Timing belt kit replaced at 215,000 km. - MOT valid until September 2027, One owner vehicle. CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales contacts: Emanuele, Luca, Giuseppe, Davide. Lurago d'Erba (Province of Como), Lombardy Opening hours: Monday to Friday: 8:30 am – 12:15 pm / 2:00 pm – 7:00 pm Saturday: 8:30 am – 12:00 pm / 2:00 pm – 5:00 pm - Certified mileage. - Test drives by appointment. - Ownership transfer on site. - Flexible financing options available. Carlo Mauri Srl declines any responsibility for possible unintentional inconsistencies in this advert, which is not a contractual offer. Prices are excluding VAT and ownership transfer.

Condition: used, functionality: fully functional, machine/vehicle number: WUN HG9, mileage: 47,496 km, power: 120 kW (163.15 HP), first registration: 09/2021, fuel type: diesel, empty load weight: 2,520 kg, maximum load weight: 980 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 12/2027, fuel: diesel, fuel tank capacity: 71 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, loading space length: 3,400 mm, loading space width: 2,035 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, electronic stability program (ESP), full service history, hill-start assist, onboard computer, power assisted steering, soot filter, truck registration, 9147 PAINT COLOUR ARCTIC WHITE MB 9147 A50 Front axle with increased load capacity A11 Control code rear axle, ring gear 215 AR2 Axle ratio i = 3.923 C6L Multifunction steering wheel C907 MODEL SERIES 907 TRANSPORTER VS30 CB1 Suspension for comfort and cargo protection CB7 Stabilization Level I CL1 Steering wheel adjustable for tilt and height E1D Digital radio (DAB) E3M MBUX multimedia system with 7-inch touchscreen F35 Rear wall window F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable F907 MODEL SERIES 907 TRANSPORTER VS30 FHL DOUBLE CAB FJ1 Folding cover for storage compartment FJ4 Storage compartment under dashboard FM3 WET WIPER SYSTEM GD8 6-speed manual transmission ECO Gear 360 HO0 Warm air duct to passenger compartment H21 Heat-insulating glass with band filter on windscreen HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC HI1 Climate zone 1 (cold/comfort) IC1 Model series C907 / C910 Sprinter IEO Model series C907 VS30 RWD IF4 Chassis with double cab IG4 Standard IG5 Basic IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5-tonner J1A Seat belt warning for rear bench J55 Seat belt warning for front passenger seat J58 Seat belt warning for driver's seat J65 Outside temperature display JA8 Crosswind Assist JF1 Rain sensor JH3 Communication module (LTE) for digital services JI7 Initial maintenance interval 60,000 km K13 Main tank 71 litres LA2 Light Assist LB1 Side marker lights MG3 Engine OM 651 DE 22 LA 120 kW (163 hp) 3800 rpm MJ8 ECO start/stop function MP6 Engine version Euro VI Ljdpfx Adox U Dzne Nshb MQO OBD (On-Board Diagnostics) level D P02 Dropside body with aluminium side walls P47 Front mud flaps P48 Rear mud flaps PZ7 Toolboxes left and right under dropside body Q11 Longitudinal frame reinforcement R65 Spare wheel holder at end of frame RRO Tyres, optimised for rolling resistance RS3 Steel wheels 6.5 J x 16 RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat S23 Front passenger seat, twin seat S78 Grab handle for inner seat on twin seat SA5 Driver airbag SB1 Comfort driver's seat SK2 Driver's seat occupancy detection T75 Entry grab handles for driver and passenger VF7 Fabric Maturin black X09 Mercedes-Benz MobiloVan with DSB and GgD XV1 Minimum reference mass required 2381 kg Z1N Approval N1 Z4W Manufactured in Ludwigsfelde Z52 ECE version Z75 Reinforced body shell

Condition: good (used), FLOTT TS 200 double bench grinder with MA600 extraction unit Ljdpfx Aox U Dkvod Nohb 400V Grinding wheel diameter: 200 mm

Condition: used, Double-head cutting saw with 3 controlled axes, featuring automatic movement of the movable head and electronic management of all cutting angles from 45° (internal) to 15° (external). Blade feed is driven by a pair of oil-pneumatic cylinders. MAIN FEATURES *Electronic control of X axis *Standard X-axis positioning speed (m/min): 25 Lhodpfsyaqu Rex Ad Neb *Movable head position detection via direct measuring system with absolute magnetic strip *Cutting unit tilt detection via direct measuring system with absolute magnetic strip *Electronic control of intermediate angles *Max internal angle: 45° *Max external angle: 15° *Oil-pneumatic blade feed *Useful cutting length (mm): 5,000 *Carbide blades: 2 *Max blade diameter (mm): 550 *Blade motor power (kW): 2.64 *ELECTRONIC PROFILE THICKNESS MEASURING DEVICE *LABEL PRINTER *Front local safety guard with pneumatic operation *Minimal oil diffusion lubrication system *Prepared for automatic start of external dust extractor *Pair of horizontal pneumatic clamps with “low pressure” device *Pair of horizontal clamps with vertical clamping system *Mechanical intermediate profile support *Roller table on movable head with mechanical profile supports in assisted mode *Weight: 1,480 kg

Condition: used, Double-head cutting-off machine – Tekna TK 154 Technical specifications: Lhodpfxjxbr Ito Ad Nsb Blade: Ø 500 mm Maximum cutting length: 4000 mm Blade tilt: outward Tilt angle: 90°/22.5 kW Voltage: 380 V Power: 7 HP Dimensions: 5200 x 1650 x H 1700 mm (max 2100 mm) Weight: 1260 kg

Condition: good (used), TECHNICAL DATA *Min/Max panel height: 10 / 60 mm *Min/Max edge height: 15 / 65 mm *Min/Max edging thickness: 0.3 / 3 mm *Panel overhang from conveyor belt: 35 mm *Minimum panel length: 240 mm *Minimum panel width: 240 mm *Feed speed: (to be confirmed) *Pneumatic connection: available LINE CONFIGURATION *Shaper unit (toupie) *Double pre-milling unit *Gluing unit *6-position edge magazine *End trimming unit *Overlapping double trimming unit *Corner trimming unit *Rounding unit with 4 motors *Shaper unit (toupie) *Edge scraping unit *Glue scraping unit *Hot air unit (phon) *Brushing unit *NC 410 control system Lsdpfx Adsvvcd Ss Nshb AUTOMATION *RBO gantry loader model SELECTA C, double station *RBO rotary panel turner model GP

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Lhjdex U A D Uepfx Ad Nob Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.