Used Cut for sale (14,475)

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf TruFlow 3200, laser hours: 35,623 h, laser power: 3,200 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 80 m/min, cutting speed: 140 mm/min, positioning speed: 140 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 3.2 kW (4.35 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: DC, type of cooling: water, overall weight: 12,000 kg, total length: 6,500 mm, total width: 7,600 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The machine was covered by a maintenance contract with Trumpf until 2023 and was serviced exclusively by Trumpf! Technical Data: - Laser power: 3,200 watts (3.2 kW) CO2 laser source (TruFlow 3200) - Operating hours: NC control: 35,623 hours Resonator / Pump 1: 34,258 hours Beam On / Pump 2: 10,155 hours - Working area (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Maximum sheet thickness: Mild steel: up to 20 mm Stainless steel: up to 12 mm Aluminium: up to 8 mm - Feed rates: X-axis: 3000 mm/min Y-axis: 1500 mm/min Z-axis: 115 mm/min - Positioning speed X/Y: 140 m/min Ksdpexc E Rqefx Ad Newt - Smallest programmable increment: 0.001 mm CNC control: Siemens SINUMERIK 840D SL

Year of construction: 2025, condition: new, functionality: fully functional, Husqvarna TS 400 F Masonry Saw NEW Husqvarna TS 400 F Masonry Saw – NEW | 125 mm Cutting Depth | 400 mm Blade | 230 V Electric Motor Item No.: 965 14 81 01 Technical Specifications: Manufacturer: Husqvarna Model: TS 400 F Condition: NEW Operating Weight: 100 kg Blade Diameter: 400 mm Bore Diameter: 25.4 mm Max. Cutting Depth: 125 mm Motor: Electric Ksdpsya Huyjfx Ad Nowt Voltage: 230 V Water Tank: 40 litres Starting System: Direct start Highlights & Features: - Includes 400 mm cutting blade – ready for immediate use - Robust slurry collection tray for clean operation - High-performance water pump for effective cooling - Adjustable cutting table with angle stop - Precise cuts in concrete, stone, and tiles - Ergonomic design for comfortable operation - Stable construction – ideally suited for tough job site conditions - Made by Husqvarna – proven professional quality Fields of Application: ✓ Structural and interior construction ✓ Paving and natural stone processing ✓ Tiling and stonemasonry businesses ✓ Landscaping and garden construction ✓ Refurbishment and renovation works ✓ Construction companies and municipalities Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international delivery upon request Other sizes & models available! ➡️ Masonry saws with various cutting depths & blade diameters – also available with 400 V or diesel drive Buy Husqvarna Masonry Saw | TS 400 F NEW | Masonry Saw with Blade | Cutting Table with Angle Stop | 400 mm Masonry Saw | 125 mm Cutting Depth | Husqvarna TS Series | Electric Masonry Saw | Professional Stone Cutting Technology Your reliable partner for cutting and separation technology: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! We are happy to offer a virtual viewing of the machine via video call upon request.

Condition: like new (used), Year of construction: 2022, operating hours: 287 h, functionality: fully functional, type of input current: three-phase, total width: 265 mm, total length: 415 mm, input voltage: 400 V, input current: 25 A, feed length X-axis: 1,800 mm, feed length Y-axis: 3,000 mm, working width: 1,800 mm, total height: 142 mm, cutting width (max.): 1,800 mm, cutting height (max.): 300 mm, front table length: 2,000 mm, hole diameter: 2 mm, Orox Tailor T 300 Automatic Cutting Machine for Sale – Complete, Turnkey Solution We are offering for sale a 2022 Orox Tailor T 300 automatic cutting machine in excellent condition, featuring extremely low operating hours. The equipment was used in a family-owned business where its capacity significantly exceeded actual production requirements; therefore, it is being offered for sale. Kedpoya Hhtsfx Ad Nswt Key advantages of the system: • Complete, integrated cutting solution • High-value (~€10,000) professional software package • Built-in photo system for recording fabric lays • Exceptional support for processing patterned materials • Detection of material defects and precise marker alignment • Supports digitization of cutting patterns • Immediate production start possible without additional investment Package includes: • Orox Tailor T 300 automatic cutting machine • Grafis pattern and nesting optimization software • Integrated photo system • Dedicated computers • 2-meter preparation/cutting table • Compressor and full accessories kit Upon request, an independent technical inspection and assistance with transport and installation can be provided. Price: HUF 35,000,000 + VAT Serious enquiries only – please contact us for further information.

Condition: good (used), Year of construction: 1997, Die cutting press, make Drössert Size: 100x140 Year of manufacture: 1997 Kjdpjya Hf Sefx Ad Njwt

Condition: good (used), 992 USED Cake cutting machine. We have 2 machines: - year of manufacture: 2000, - year of manufacture: 2005 EXTERNAL DIMENSIONS (in cm.) - H: 154, - W: 105, Kwjdpovrql Nsfx Ad Net - L: 90. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting machine Perndorfer type WSS4020, table size 4000/2000 mm, BFT high-pressure pump with 37 kW and 4000 bar cutting pressure, 3-D cutting head for contour cutting. The machine is used and in good condition; an overhaul by the manufacturer was carried out recently. The machine can be inspected and tested at any time. Kedjx H Ny Tspfx Ad Nswt

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Kwsdpfx Aomqkr Djd Nst

Condition: used, Year of construction: 2000, functionality: fully functional, Kerma TS 3E Die Cutting Press, completely overhauled in 2000. Die cutting area 850x1250 mm / Clamping frame size 800x1200 mm. Quick-clamping frame. Safety infeed and outfeed tables. Max. pressing force: 240 t. Dimensions: 2500 x 2000 x 1650 mm. Power: 7.5 kW. Kodex Anvpspfx Ad Njwt

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 Kjdpfjyazrtsx Ad Njwt General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Loading and unloading stations

Condition: used, Year of construction: 2007, functionality: fully functional, Polar cutting line 137 X, year of manufacture 2007 831,815 cuts, equipped as follows: Polar guillotine cutter type 137 X Polar jogger RA-4 with air-removal roller, year 2020 Bizerba scale MCI-Z Kwedpfoyazk Nox Ad Not Baumann lift Baumann stacker BA 3/N

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Kwjdpjyazkcofx Ad Nst

Condition: excellent (used), Year of construction: 2009, HOLZMA cross-cutting unit for dividing panel offcuts, such as those produced by angular cutting lines – part of the automatic waste disposal system for panel sizing lines. Ksdpfx Adjyay Igj Newt TYPE HRZ 540 Year of manufacture: 2009 Machine no. 0249083537 Trim and edge cut waste falls down through the waste flap into a vibrating chute. This transports the offcuts to a chipper (cross-cutting unit). From there, the shredded waste is conveyed, for example via a waste incline belt, into a scrap bin.

Condition: used, Powerflex IV Thread Cutting Machine, Thread Cutter M8 - M27 75 rpm - 900 rpm Reach: max. 1200mm radius Year of manufacture: 2008 You are welcome to schedule an inspection appointment. Kwodpfxsq U Sfps Ad Not We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm Kwjdpfx Adoqnvtzj Net max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 77731, Band Slicing Machine Kronen GS 10 This band slicer with an extended infeed belt from Kronen is ideal for slicing vegetables and fruit. Thanks to the wide range of blades, the machine can cut slices, strips, and cubes. It is also possible to “slice” pulled meat using the specially designed pulled-meat knife. This slicer is highly suitable for salad, (leafy) vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and much more. It is ideal for use in large kitchens, catering, fresh-produce specialty shops, and industrial applications. Various cutting accessories are available for a wide range of applications. The easily adjustable control panel allows for quick product changes. The belt speed and blade speed are infinitely adjustable (frequency-controlled), enabling even delicate products to be cut effortlessly. This industrial slicing machine is made entirely of stainless steel. Specifications: Kwjdpfx Aox A Sg Eed Njt • Production capacity: 1500 kg/h (depending on product and cut size) • Working width: 125 mm • Cut size: 1 mm – 45 mm • Cutting types: slices, strips, cubes, grating, pulled meat • Included blade: slicing blade 4 mm • Infeed height: 890 mm • Outfeed height: 610 mm • Voltage: 230V (3+N, 50Hz) • Power: 1.8 kW • Weight: 260 kg • Machine dimensions (W x D x H): 2530 × 650 × 1390 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Cutting dimensions: a-2200 c-2200 h-1300 Transport to your specified address can be arranged. Kodpoyaxrkjfx Ad Nowt For more information, please contact by phone only: 508388091

Condition: good (used), Year of construction: 2017, 700 W working area 1500 x 3000 mm Kwjdpex Ttclsfx Ad Not

Condition: excellent (used), Year of construction: 1998, overall weight: 35 kg, Metal cutting Tooling REISHAUER - HF 330 Diameter: 330mm 3 Chuck: 3 chuck Spindle bore:80mm Connector: 8 Length: 330mm Width: 100mm Height: 0mm Weight: 35kg Kwjdpfxox Ttils Ad Njt

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Spindle bore:160mm Connector: CAMLOCK D-8" Max. speed: 1900Rpm Length: 0mm Width: 0mm Height: 0mm Weight: 60kg Kwodpsx Ttc Esfx Ad Net

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: Very large number of tools Kwedpfx Adjx Trw Ij Net

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Ksdpfsx Tpudex Ad Newt Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm Kwodpfx Ajx Tpt Hjd Njt tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm Kwedpfxjxvb Hzs Ad Nst - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Ksdpox Tpzkofx Ad Njwt Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Width: 400mm Height: 300mm Weight: 50kg

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Kwsdpohv U Tiofx Ad Not Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING