Used Coil for sale (1,299)

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Straightening Machine 18.26019 Passage width: max. 260 mm Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Hjdpfxsyb A Swj Aahjp Drive power: approx. 7 kW Speed: 0 – 40 m/min Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: new, Year of construction: 2019, functionality: fully functional, Original, packaged condenser coil, CU/AL, for a Carrier unit, 30RQ0232-B0030-PE (00PSG000059104A), and a fan blade. These are spare parts for a Carrier heat pump, 30RQ0232-B0030-PE. Hedpfx Aaezbz Uqohjp

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Hsdpfx Aajwhp A Dehep Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, product width (max.): 1,500 mm, input voltage: 400 V, SWAH LCP-01 A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. Specifications Hodpfezbh Auox Aahsp • Manufacturer: SWAH s.r.o. (Czech Republic) • Model: LCP-01 • Year of Manufacture: 2003 • Serial No. (M. No.): 2188 • Application: Fully automated production of rectangular ducts from coils. This line is a complete system, including • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. • Material Thickness: Galvanized Steel: 0.4 mm – 1.2 mm Stainless Steel: 0.4 mm – 0.8 mm Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, empty load weight: 7,743 kg, axle configuration: 3 axles, first registration: 09/2018, suspension: air, Year of construction: 2018, Equipment: ABS, Poids à vide: 7743kg, Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, mines 10/2026, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Hodpfx Aajyw Amzehep

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Based on the tried-and-tested HANGLER welded construction using high-quality steel with forward-tapering welded longitudinal beams. Frame neck with double center web. Z-profile crossbeams punched through the longitudinal beam with welded special side frame. Replaceable 2" kingpin, beveled forward with a grinding plate, made of high-quality steel sheet. 18 pairs of lashing rings embedded in the outer frame, each with a capacity of 2.5 tons, 8 pairs of folding lashing rings embedded in the outer frame, each with a capacity of 5 tons, 24 tons. 2-speed support winch, single-side operation, with straight lower part, 2 support wedges with holder, aluminum side impact protection, plastic fenders in front of and behind each axle, with anti-spray flaps behind each axle, underrun protection at the rear, spray flaps at the rear over the entire width, coil trough approximately 8,000 mm long with cover, approximately 40 mm, divided by angled loading beams. Stanchion sockets and supports suitable for FR 80/80/4, completely hot-dip galvanized. Plug-in stanchions 80/80 including lower reinforcement, hydraulic angled loading device with 4 crossbeams: hydraulic supply via tractor unit using a 2-line pump system (supply and return) with a 2-way quick-release coupling. Angled loading beams with integrated extendable sections that can be locked in height. Hydraulic cylinders multi-stage, each beam with a universal joint suspension. Including supports - adjustable - with pin securing. Cylinder passages with strip brush seals on both sides, to protect against weathering and cleaning of the piston rods. 5-way control block for operating the angled loading device as well as for the folding device. Sliding tarpaulin, including tarpaulin rail cover, 1 set of coil floor holder with height-adjustable support bolts for various coil floor diameters, including storage. 1 piece of impact protection for angled plate - for securing at the front, BPW or SAF disc brake axles, at the manufacturer's choice, offset axle spacing 1310/1450 mm, air suspension, 2-line compressed air brake system, aluminum compressed air tank, spring brake parking brake, axle load recognition via EBS-CAN bus signal, for display on the display in the cab, the truck must be correspondingly pre-equipped, "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, 435/50 R 19.5", manufacturer's choice, 24 volts, multi-chamber lights, yellow LED lighting on the side, yellow LED lighting on the side coupled with the turn signal "flashing side marker lights", 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, additional 7-pole socket (according to ISO 1724) in the underrun protection at the rear, pair of warning signs double LED illuminated and extendable to 3,000 mm, removable with a plug, LED beacon with holder, switched via parking lights, sieve-printed panels approximately 30 mm thick, flush-mounted with the side frame! Front wall made of aluminum hollow profiles, fixed height approximately 2,400 mm, with wooden slats above it. Inside reinforced with 3 mm aluminum sheet, approximately 630 mm high from the floor as a baseboard. 2 front VOLUMEN corner posts, permanently mounted, approximately 2,400 mm high, 3 pairs of Kinnegrip center posts, approximately 600 mm high with Kinnetop at approximately 2,000 mm, 1 pair of plug-in rear corner posts including reinforcement inside up to the 1st slat row, aluminum hollow profile, approximately 600 mm Hedpfx Aji Riw Heahsp

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t Hedpelimrmsfx Aahop coil width: max. 1.900 mm coil OD: max. 1.900 mm

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t stroke: 700 mm Hsdjlimtkopfx Aahop

Year of construction: 1990, condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Hsdpfelimuhex Aahop

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm coil OD: max. 1.900 mm Hjdpfxobh Dg Ss Aahsp

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Hedpfx Ajd Ha Hcsahsp stroke: 1.000 mm

Year of construction: 1990, condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Hjdsbibu Topfx Aahop

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm Hsdpfxolimqtj Aahop coil weight: 25 t stroke: 700 mm

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017 Hjdpfoinupvjx Aahep

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm Hjdpelimrxefx Aahsp coil weight: max. 30 t stroke: 1.000 mm

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm Hsdpjlimtcjfx Aahsp year: unknown / overhauled in 2017

Condition: good (used), Approx. 27 coil stacking racks – used –: Only sold as a complete lot: Price per piece ex-location: €139 (net)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Dimensions (approx.): L: 1m, H: 1m, W: 0.62m Own weight: approx. 72kg Hodpfx Aajw Hqc Ashjp Load capacity: 3,000kg Condition: good Available: immediately Location: 67346 Speyer

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Hedpevg Iqxsfx Aahjp Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz Hjdpfexw Rcuex Aahjp - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Hedpeif Sg Sjfx Aahjp Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Model: Coil Pick & Tilt 20 1500 250 Hjdpfxju Nx Nzo Aahjp Year: 2023 Hours: 10hrs Condition: Excellent Description Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Distance Between Forks(Closed): 610mm Truck Weight: 1365kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krone Coil Liner Sliding Curtain Sider Trailer * Krone Coil Liner Hedpey U Au Hofx Aahop * 3 axles * SAF axles * Disc brakes * Air suspension * EBS / ABS * Edscha sliding tarpaulin cover * Coil well * Code XL * Sliding tarpaulin * Container doors at the rear * Toolbox * Spare wheel holder * Lifting/lowering function * Internal length approx. 13.62 m * Internal width approx. 2.48 m * Internal height approx. 2.62 m * Tires 385/65 R22.5 If you have any questions, please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, feed rate Y-axis: 15 m/min, workpiece weight (max.): 15,000 kg, power: 3 kW (4.08 HP), type of cooling: water, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1503CH Laser Blanking Line | Coil Laser Cutting System 3–6 kW For sale is a SENFENG SF1503CH Laser Blanking Line, a fully automatic coil laser cutting system for processing thin sheet metal directly from the coil. The system combines unwinding, leveling, feeding, laser cutting, and unloading in a continuous production line. It is particularly suitable for manufacturers who want to automate their series production, reduce material handling, and improve material utilization. Application areas: Suitable for automotive suppliers, switchgear and housing construction, mechanical engineering, construction and agricultural machinery, kitchen and sanitary industries, metal furniture, medical technology, facade and decorative elements, and general sheet metal processing. Processable materials: Carbon steel, stainless steel, galvanized sheet metal, and other suitable coil materials after technical evaluation. Technical data: Model: SENFENG SF1503CH System type: Coil laser cutting system / Laser blanking line Laser power: 3–6 kW Working area: 3000 × 1500 mm Coil thickness: 0.8–3.0 mm Coil width: 600–1500 mm Max. coil outer diameter: Ø 1400 mm Standard coil inner diameter: Ø 508 mm Max. coil weight: 10,000 kg Feeding speed: 0–15 m/min Feeding length: 0–3000 mm Positioning accuracy X/Y: ±0.05 mm Repeatability X/Y: ±0.02 mm Power supply: 380 V, 50 Hz, three-phase Protection class: IP54 Possible equipment / configuration depending on the offer: Depending on the configuration, the system can be equipped with a loading cart, unwinding unit, feed and leveling unit, sheet metal positioning and alignment system, laser cutting unit, CNC cutting system, operator interface, cooling system, safety monitoring, and unloading or material take-up unit, among other features. Optionally, depending on the project requirements, protective film lamination, marking system, safety fence/light curtain, nesting software, and dust and fume extraction can be included. The exact equipment, brands of key components, and optional extensions are determined in the individual offer. Advantages: Fully automatic process from coil to finished cut part Reduced manual material handling High material utilization through coil processing and nesting Precise sheet metal guidance through correction and alignment system Leveling technology for stress reduction and improved flatness Suitable for continuous series production Intelligent CNC control with process database Automatic selection and control of auxiliary gases possible Description: The SENFENG SF1503CH was developed for processing thin coil material. Compared to conventional sheet metal cutting, the system reduces several intermediate steps such as separate unwinding, external leveling, manual loading, and individual handling of sheet metal. The coil material is picked up, unwound, leveled, and then precisely fed to the laser cutting unit. The integrated leveling technology improves the flatness of the material and reduces internal stresses before the cutting process. Hodpot Huugsfx Aahep The system is particularly suitable for companies with a regular need for flat sheet metal parts, recurring contours, and series production. Inspection, technical consultation, and quotation upon request.

Condition: used, C-Hook / Coil-Car / Electromagnets / Transport cars for tubes Hedpfx Aaey Uhv Ashop

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Hsdpfxjw I T Ivj Aahsp Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.