Used Circularsaw for sale (4)

Condition: good (used), Year of construction: 2002, saw blade diameter: 425 mm, cutting range round steel at 90°: 145 mm, total length: 1,200 mm, total height: 1,800 mm, total width: 900 mm, overall weight: 1,000 kg, Sawblade: ø 425 mm Sawcapacity: 145 mm round, 120 mm square Saw mitre: 45º left/right Sawspeed: 18 / 36 m/min. Autom. length stop: MPS, type 4010, 8 meter long Featured with: - Half automatic Itsdpfsunhl Iox Affsr - Hydraulic clamping - Variabele sawing feed Country of origin: Germany Motor power: 5,5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers Itodpsi Dylfsfx Affor (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, cutting length (max.): 10,000 mm, power: 23.8 kW (32.36 HP), saw blade diameter: 700 mm, overall weight: 3,800 kg, Equipment: motor brake, The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °. Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter. DISTINCTIVE FEATURES: - No need for logs sorting; - Individual sawing scheme for each log; - The possibility of sawing logs with a diameter of 150 to 1000 mm; - Efficient output up to 70%; - High productivity – up to 20 m³/shift (counting by raw roundwood). SPECIFICATION: Dimensions (for a cutting length of 6 m): Length: 3320 mm Width: 2220 mmHight: 2130 mm Track length: 13380 mm Cutting parameters: Max. log diameter: 1000 mm Min.log length: 2000 mm Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240) Circular saw diameter: 450 - 700 mm Motors: Main motors power x2: 12 - 23,8 kW Shaft rotation speed: 1400 rpm Feeding system Feeding motor power: 1,5 kW Feeding motor rotational speed: 1450 rpm Feeding speed: 0-30 m / min Isdjv D Rwvspfx Affetr *Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Itedpjv Ic Iuefx Affjr Forward and backward movement is pneumatic. Height adjustment is electric. La diameter: 700mm.