Used Centrifugal Water Pump 200 M H for sale (101,360)

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Iodpfx Apszmap Nocobb More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 2012 Mat.-No.: 01216137 Ijdpfx Aezvyinopcebb Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine * Milling width: 2 m Iedjzm Epbspfx Apcebb * Hydraulic folding conveyor belt * Weight: 29,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 Iodpjzva S Aofx Apcjbb • Protection class: IP55 • Insulation class: F • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: excellent (used), For sale: industrial centrifugal pump KSB ETABLOC-GN 40-125/402 with a 4 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 40-125/402 • Design: GN11 • Identification number: 48861800 • Pump number: 5-925-204029/1 • Flow rate: 31–59 m³/h • Head: 25–17.5 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FA 112M2A-60 • Motor number: 243866 HU • Power: 4 kW • Power supply: three-phase • Frequency: 50 Hz • Speed: 2850 rpm • cos φ: 0.91 Ibedpfxezvbgbo Apcob • Protection class: IP55 • Insulation class: F • Operating mode: S1 Condition: used.

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A Iedpfxjq Tqnqe Apcjbb You can find more centrifugal pumps - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, DPVSF 10/15B 5.18 kW, Used machine Manufacturer: DPVSF 10/15B Type: Frame 132 (5.18 kW) Electrical data: 400V; 10A; 5.18 kW Ibjdpfxov Dr Dko Apceb Flow rate: 10.23 m³/h Head: 123 m Year of manufacture: 2016 Overall dimensions: Length: 300 mm Width: 300 mm Height: 1200 mm

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Ibjdpoxqr E Djfx Apcsb

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Ibedpfetu Truex Apceb Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 1,250 mm, total length: 3,540 mm, total height: 2,200 mm, warranty duration: 6 months, heating capacity: 184 kW (250.17 HP), Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Ibodpsyzzqtefx Apcjb The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Promoted by APEXPUMPS Bristol UK Ibjdpjt A U H Iofx Apceb -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: Ibjdpozu Ryhjfx Apcjb • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), For sale: a used industrial centrifugal pump, KSB ETABLOC-G 32-160/302.2, with a 3 kW electric motor. The pump has been inspected and is fully functional. It is in used condition, with visible signs of wear, paint defects, and localized surface corrosion. The detailed condition of the unit is shown in the photos. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-160/302.2 Serial number: 0-118-631 703 Flow rate: 4–29.3 m³/h Head: 36.3–23 m Rotational speed: 2900 rpm Ibjdpfxszvhxkj Apcjb Year of manufacture: 1990 Pump weight: 42 kg Motor technical specifications: Manufacturer: KSB Type: ZKA 100L2 Identification number: 0533496 Motor number: 585957 Power: 3 kW Power supply: three-phase Voltage: 380/660 V Current: 6.3/3.6 A Frequency: 50 Hz Rotational speed: 2860 rpm Protection class: IP54 Insulation class: B cos φ: 0.89

Year of construction: 1990, condition: excellent (used), Production: KOJA Ibedpfjrgqm Hox Apcsb Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.

Year of construction: 2015, condition: excellent (used), coolant capacity 10 m3l/h Headroom 18 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor type 80 L motor speed 2900 U/min Ijdpeub Ur Tsfx Apcebb engine output 1,1 kW weight 33 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Isdpfx Aezvyuqepcobb Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: used, feed pressure / bar Ijdpfx Ajy S D D Rspcebb liter capacity / l power capacity 17,3 kW

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Ibedpfx Aezvhq Hspcsb Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 Ijdjzva Azjpfx Apcebb • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: ready for operation (used), Pump; KSB ETABLOC GNF 050-315 Centrifugal Pump, Used machine Manufacturer: KSB ETABLOC Type: GNF 050-315 Overall dimensions: Width: 510 mm Depth: 420 mm Isdpfx Aeyh D H Tjpcsbb Height: 700 mm Weight: 55 kg Electrical data: 400 V; 1450 rpm Flow rate: 30 m³/h Head: 26 m Year of manufacture: 2010

Condition: like new (used), FISCHER Maschinen- und Apparatebau AG Type: H50/3v Serial No: 002664417-3 Year: 2013 Made in Austria Technical details: Flow rate: 25 m³/h Head: 15 m WS Ijdoxpitvepfx Apcsbb Power: 3 kW Speed: 2900 rpm Minimum back pressure: 1 m WS Condition: The pump appears unused and comes from the surplus stock of a factory closure. However, due to its origin, we cannot guarantee that it is brand new. Sold as is, as shown in the photos.

Condition: good (used), Year of construction: 2019, Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multistage Vertical Centrifugal Pump Ibedpeylif Eofx Apcsb -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Condition: new, Year of construction: 2026, functionality: fully functional, All of our products are made with care and covered for 1 year warranty! Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1640 Type - Dewatering Screen - Capacity: 150 T/H - Size: 1600 x 4000mm - Screen Decks: 1 Deck 0.250 / 0.500 micron Polyurethane Screen Ijdsyzw Hdjpfx Apcobb - Screen Surface: 6,4 m2 - Screen Power/Spin: 2 x 8.4 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Water Consumption: 300-450 m³/h - Weight: 13000 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter Isdpsvtzdljfx Apcebb -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available -Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125/222 centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in good working order. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-125/222 Identification number: 48862622 Flow rate: 4–30 m³/h Head: 25–18 m Pump speed: 2900 rpm Ibsdpfx Apozvhn Ejcjb Additional type: G32-125/22 2 Number: 198057/6 Motor specifications: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 220–240 / 380–420 V Speed: 2850 rpm Frequency: 50 Hz Power factor: cos φ 0.89 Protection class: IP55 Insulation class: F