Used Buffer Memory for sale (1,406)

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital input, single block Rodpfx Aeh Apz Hohcocf -Manufacturer: Siemens, Simatic C1 Single Block Electronic Module -Type: 6EC1 110-3A -Number: 3 modules available -Price: per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact device Simatic S5 with memory card -Type: 6ES5 095-8MC01 -Quantity: 1 piece available Rcodsh A Sb Nspfx Ahcjf -Dimensions: 130/90/H135 mm -Weight: 1.4 kg

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input, analog input -Manufacturer: Siemens, Simatic S7 analog input EM231 -Type: 6ES7 231-OHCOO-OXAO -Number: 1x module available -Price per piece Rcjdpfoh Di Hkox Ahcjf -Dimensions: 90/60/H90 mm -Weight: 0.2 kg/pc

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S 4 pieces -Type: 6ES7 131-4BDO1-OAAO Rsdpjh D Amcefx Ahcecf -Number: 4x module available -Price/delivery: complete -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc

Condition: used, Quantity: 6 units Rcjdezd N Rkopfx Ahcef Functionality tested; item comes from the dismantling of equipment from an automotive supplier. Manufacturer: ADLINK Type: MXC-6321D(G) Fanless Embedded Box PC Processor: Intel Core i7-3610QE (QM77) Expansion: 3 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I (3 independent displays) Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Memory & Mass Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), DDR3 (max. 16 GB) Input voltage: 9–32 V DC Protection & Operation: Fanless, -20 °C to +55 / +60 °C (with option) Weight: approx. 4.3 kg

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Rodozbiybspfx Ahcjcf Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: used, Year of construction: 2023, Integrated CompAir L45RS Workstation Manufacturer Gardner Denver Deutschland GmbH (Main Compressor Package), with integrated components from Parker Hannifin Manufacturing S.r.l. (Refrigeration Dryer) and Cordivari S.r.l. (Galvanized Pressure Vessel). Type Variable-speed rotary screw air compressor workstation driven by an integrated frequency inverter system, fully integrated with a downstream refrigeration dryer and a vertical galvanized air receiver tank. Industrial Applications Engineered for continuous, energy-efficient plant compressed air generation in manufacturing, industrial engineering workshops, packaging facilities, and automotive assembly plants. This system relies on variable-speed control to match precise downstream air demands, significantly reducing energy overheads under fluctuating load profiles. Rsdpfxezcatbo Ahcjcf Key Technical Specifications * Core Compressor Unit: CompAir L45RS-13A (Version V2) - Technology: Oil-injected rotary screw with frequency inverter (Regulated Speed) - Installed Motor Power: $45 \text{ kW}$ (Max speed: 4,250 R.P.M.) - Volume Flow Rate (Capacity): Up to $8.02 \text{ m}^3\text{/min}$ max - Operating Pressure: $13 \text{ bar g}$ maximum stage pressure - Electrical Supply: $400 \text{ V}$ | 3-Phase | $50 \text{ Hz}$ | Full load current: $97 \text{ A}$ - Control Unit: DELCOS XL touchscreen graphic controller showing 55,404 total running hours and 55,366 hours loaded - Refrigeration Air Dryer: CompAir F95HS (Parker Hannifin), using eco-friendly R407C gas, max pressure $14 \text{ bar}$ - Air Receiver Tank: Cordivari $986 \text{-Liter}$ vertical vessel, maximum allowable pressure $10.67 \text{ bar}$, hot-dip galvanized finish for long-term corrosion resistance Machine Utilization The main CompAir L45RS rotary screw compressor serves as the mechanical core of this processing package, drawing raw air and compressing it via its high-efficiency $45 \text{ kW}$ screw element. The integrated inverter matches motor speeds directly to factory demand to avoid wasteful start-stop cycles. During continuous operations, the CompAir F95HS refrigeration dryer strips moisture out of the compressed air stream to safeguard downstream pneumatic components and tools from rust and water carryover. Finally, the standalone $986\text{-Liter}$ galvanized storage tank acts as an expansion buffer volume to smooth out pressure spikes and handle natural consumption peaks without stressing the main drive. System Highlights * Compressor-Centric Production Station: A complete utility layout engineered to maximize the operational lifespan and performance of the core $45 \text{ kW}$ screw compressor. - Smart Variable Demand Matching: The inverter regulation ensures optimal energy savings, matching actual air consumption rather than running a constant fixed-speed overhead drain. - Robust Diagnostic Integrity: The premium DELCOS XL interface monitors air station diagnostics, recording exact usage metrics, load profiles, and service intervals directly from one integrated control panel.

Condition: excellent (used), Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller The high-performance robots in the TX90 series, designed for medium payloads, offer maximum flexibility for many applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The completely encapsulated design (IP 65) allows use in cleanrooms or under aggressive environmental conditions. Features Completely encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of components Standard version for cleanroom class ISO 5 Easy to clean Excellent dynamic path performance High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash Disk and USB port Rcsdpszh U Sbsfx Ahcof System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: TX90L robot / CS8C controller Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK XL-1100 is a fully automatic, high-speed folding carton gluing machine of the latest generation, specifically designed for the efficient processing of cardboard and corrugated board. Thanks to its intelligent memory function, high production speed, and state-of-the-art control system, the machine is ideal for packaging manufacturers with high quality and performance requirements. The KMK XL series enables quick changeovers thanks to its integrated intelligent memory function and processes a wide variety of folding carton types with the highest precision. It is the ideal solution for the economical production of straight-line, 4-point, and 6-point folding cartons. ### Highlights * Fully automatic, high-speed folding carton gluing machine * Intelligent memory function for quick changeovers * Production speed up to 400 m/min * Suitable for cardboard and corrugated board (A-, B-, and E-flute) * Processing of straight-line, 4-point, and 6-point cartons * Precise folding and gluing system * High production output with maximum accuracy * Robust industrial design for continuous operation * Easy operation and short setup times ### Applications The machine is ideally suited for the production of: * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Shipping packaging * Packaging made of cardboard and corrugated board * Display packaging * Industrial and consumer goods packaging ### Technical Data * Maximum working width: 1,100 mm * Material: Cardboard 210–800 g/m² * Corrugated board: A-, B-, and E-flute * Maximum production speed: 400 m/min * Maximum box thickness: 12 mm * Power supply: 3 phases, 380 V, 50 Hz * Total power consumption: 40 kW * Machine dimensions (L × W × H): 20,000 × 2,100 × 1,750 mm * Machine weight: approx. 11,500 kg Redozg E Nnjpfx Ahcscf ### Processable Box Types * Straight-line cartons * 4-point folding cartons * 6-point folding cartons * Two- and three-piece designs * Various packaging sizes through flexible adjustment ### Optional Equipment * Quality control system * Rejection of defective products * Hook-less climbing structure ### Standard Equipment * Automatic feeding system * Precise folding and gluing system * Intelligent memory function * High-performance transport and pressing system * User-friendly control * Fully automatic production line ### Included in Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ On-site machine commissioning ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approx. 8–12 weeks after order placement ### Machine Type Fully automatic, high-speed folding carton gluing machine KMK XL-1100

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, OKUMA MU-6300V (2023.11) – Technical Specifications Model: MU-6300V Simultaneous 5-axis Vertical Machining Center Water-soluble coolant CNC Control: OSP-P500M Rcodpezhgh Isfx Ahcjf Display language: Korean Power supply: 220V / 60Hz Operating voltage: 100V CE + EMC compliant Axis Travels X-axis: 925 mm Y-axis: 1,150 mm Z-axis: 600 mm A-axis: +90° / −120° C-axis: 360° continuous Simultaneous 5-axis machining Feed Rates Rapid traverse (X/Y/Z): 50 m/min Cutting feed: 50 m/min A-axis rapid speed: 10,800°/min C-axis rapid speed: 32,400°/min Table diameter: Ø630 mm Table configuration: 6 radial T-slots (18H7) Spindle taper: BT40 (MAS BT40) BIG PLUS dual-contact spindle Spindle speed: 50–15,000 rpm Main motor: 22 kW (10 min) / 18.5 kW (continuous) Spindle oil cooling TAS-S spindle thermal compensation TAS-C ambient thermal compensation Tool Magazine 32-tool Automatic Tool Changer (ATC) Air blow for ATC Taper cleaning air blow Standard tool release system JIS pull studs Measuring System Absolute linear scales on X/Y/Z axes Renishaw TS27R automatic tool setter and tool breakage detection Renishaw RMP60 wireless workpiece probing system Calibration reference tool included Manual measurement function 5-Axis Functions Tool Center Point Control II (TCP/RTCP) Hyper-Surface II Slope Machining Function Inverse Time Feed Manual Tool Center Point Transfer Table Coordinate System Transfer DNC-DT Accuracy & Compensation Five Tuning Kit Geometric error measurement Geometric error compensation Straightness compensation Dynamic displacement compensation Coolant System Through-Spindle Coolant (TSC): 1.5 MPa Through-spindle air blow Standard coolant pump: 390 W Wash-down pump: 800 W Through coolant pump: 1.1 kW Cyclone + sintered bag filtration system Chip Handling Floor-type hinge chip conveyor Conveyor height: 750 mm Right-side chip discharge Safety & Protection Full enclosure with roof Y-axis guide cover CE-compliant door interlock CE + EMC export specification 220–480V transformer KCS machine nameplate Operator Interface 21.5-inch adjustable OSP control panel Smart OSP Servo Navigation AI Servo Navigation SF ECO Suite Plus ECO Power Monitor OSP Software Features 4 GB program storage 10 MB operation buffer 999 tool offsets 200 work coordinate systems Tool Life Management Tool Wear Compensation Real 3D Simulation NC Operating Monitor Simple Load Monitor Tool Damage Detection Programmable Messages Programmable Mirror Image Program Stroke Limit Automatic Program Update Automatic Power-Off Function Digital Twin Functions Digital Twin DMC Kit Hyper Simulation Quick Modelling Interactive MAP (I-MAP) OPC UA for Machine Tools Additional Equipment LED work lights Three-color status indicator Mist collector connection (Ø150 mm) Virus protection system

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: Rjdpfx Ahozgtyhecscf X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: used, Year of construction: 1998, Overview This complete glass bottling line was manufactured between 1996 and 1998 by various European manufacturers. The line is designed for the filling and packaging of bottles and includes depalletizing, rotary light vacuum filling, capsule application and smoothing, corking and screw capping, and automatic palletizing. The equipment is suitable for automatic bottling operations with a production capacity of approximately 10,000 bottles per hour.  Technical data - Capacity: approx. 10,000 bottles/hour - Application: Automatic bottling and packaging of bottles - Filling system: Light vacuum filling Rcsdpfx Ajzh Ikdjhcsf - Rinser: Penetrating nozzle rinser - Cleaning system: Compatible with automatic CIP cleaning - Closure types: - T-top corks - Pilfer caps - Stelvin caps - Compatible closure sizes: - 31.5 × 44 mm - 30 × 60 mm - Capsule application: Automatic capsuling machine with integrated thermal heads for PVC capsule smoothing - Capsule smoothing: Automatic smoothing machine for complex capsules and tin capsules - Palletizer: - Drag-type automatic palletizer - Compatible with European and American pallets - Format memory for up to 15 palletizing patterns - Utilities: - OCME Dorado 162-T Depalletizer: 6 kW - Irundin 36/44-8 Filler: 10 kW - Robino & Galandrino M. Monostadio Z T 6: 4 kW - Nortan Aurora 160: 3 kW - Tedelta CR 504: 3 kW - OCME P115/N/S Palletizer: 15 kW Scope of Delivery  - Depalletizer | OCME | Dorado 162-T | 1998 | High-speed drag depalletizer - Rotary filler | Irundin | 36/44-8 | 1998 | Light vacuum filler with penetrating nozzle rinser and CIP compatibility - Capsule applicator | Robino & Galandrino | M. Monostadio Z T 6 | 1998 | Automatic capsuling machine with integrated thermal heads - Capsule smoothing machine | Nortan | Aurora 160 | 1996 | Automatic capsule smoothing machine - Corking and screw capping machine | Tedelta | CR 504 | 1998 | Automatic closure application for corks, pilfer and Stelvin caps - Automatic palletizer | OCME | P115/N/S | 1998 | Drag-type palletizer with format memory

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots Rodpfx Aoymyp Rjhcjcf - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 12,000 rpm, overall weight: 13,000 kg, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 18,500 W, tool weight: 8,000 g, number of axes: 5, This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details. • B-axis rotation: +160° / -180° • C-axis table: 360,000 positions (0.001° resolution) • Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min • Maximum torque: 135 Nm • Turning function: Integrated in table • Max. turning diameter: 450 mm • Max. swing diameter: 700 mm • Tool magazine capacity: 60 tools • Max. tool diameter: 125 mm • Max. tool length: 300 mm Rsdpfxoym Dbqo Ahcocf • Spindle cooling: Oil cooling system • Zero point: Automatic adjustment and dynamic correction (8 points) • Cutting control: Automatic power control • Program memory: 2 MB • Custom macro: 999 variables • Tool life management: 128 × 2 groups • Status: Currently operational; inspection by Mori Seiki technician available Additional equipment • Pallet system: Automatic robot for loading/unloading • Measurement: Renishaw tool and part probing systems • Cooling: Independent high-pressure coolant system (40 bar) • Chip management: Rear chip conveyor • Power: Electrical transformer • Documentation: Full manuals, parts list, and electrical schematics • Tooling and pallets included; estimated value €50,000–€55,000 Technical Specification Taper Size BT 40

Condition: new, empty load weight: 2,798 kg, maximum load weight: 15,202 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,050 mm, Year of construction: 2026, Equipment: ABS, Unladen weight: 2798 kg, permissible total weight: 18000 kg, tire size: 385/65 R22.5, axle 1: , axle 2: , air suspension, underrun protection, electronic braking system (EBS), toolbox, connector plug 1x15 and 2x7-pin, anti-spray, telematics system, drawbar buffer, parking height 1: 1120 mm, parking height 2: 1320 mm, driving height: 435 mm, with 1 pair of small centering rollers at the front, in the middle, and at the rear, drawbar: 2000/1300/100/30, drawbar tube extendable by 6x100 mm, drawbar pin, inner diameter: 40 mm, outer diameter: 110 mm, thickness: 30 mm. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Rcsdpezhpzwefx Ahcsf

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Reach: 901 mm Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Rcsdpeziczmofx Ahcef Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. Rsdpfx Ahjzmx Nuecjcf 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,930 mm, loading space width: 2,450 mm, loading space height: 1,300 mm, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Container Trailer Heavy-duty fine-grain steel welded construction Sliding container system: Container is loaded from the rear onto the sliding frame and pushed forward. Adjustable front container stop for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers. Container locking system: * 2 pairs of recessed locking hooks * Pneumatic operation Heavy-duty turntable with ball-bearing ring. 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards Vertical rear impact protection (left and right) with Delta rubber buffers 1 spare wheel holder with mounting kit Lockable plastic toolbox with drawer and shelf (650 × 520 × 670 mm) # Drawbar Drawbar with certified 40 mm towing eye # Axles + Suspension SAF disc brake axles Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres on factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake Drive-away protection: parking brake is automatically activated when the container locking system is open Vehicle Stability System (VSS) 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 LED rear work lights, activated via reverse gear 2 × 7-pin front connectors with connecting cable # Registration Rcjdpfx Aezna Tdohcef Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation or painted in customer's preferred colour Drawbar KTL-coated in black

Condition: new, functionality: fully functional, machine/vehicle number: RR16HHE3L, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, power: 1.2 kW (1.63 HP), battery capacity: 205 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 170 mm, fork thickness: 65 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,165 kg, total length: 1,975 mm, total width: 836 mm, SCHORR HIGH-LIFT TRUCK, ELECTRIC, PRO 1600KG LOAD CAPACITY, 5M LIFT HEIGHT, RR16HH500E3L, FULL FREE LIFT - 1,600 kg load capacity, designed for demanding warehouse operations - Triplex mast with full free lift: lift even with a compact 2,185mm overall height - Proportional lift and lowering control: precise positioning to the millimeter - 24 V / 205 Ah lithium battery, easy to recharge - Low-maintenance AC drive, multi-function display, up to 16% incline - Turning radius 1,506 mm, only 836 mm wide: maneuverable in narrow aisles A powerhouse for your warehouse Rcsdpozktyiofx Ahcjf Heavy pallets, high shelves, tight schedules: The RR16HHE3L, with a 1,600 kg load capacity, is designed for demanding warehouse operations and reaches a lift height of 5.0 meters. Receiving, block storage, racking: You can handle the tasks of your warehouse with a single device, instead of switching between several machines. The substance behind it: solid chassis, stable triplex mast, polyurethane tires for continuous operation, and an electromagnetic operating brake that keeps the equipment and load safely in position in any situation. This ensures that the RR16HHE3L remains what your warehouse needs, even in multi-shift operation: a reliable device. Full free lift: full height, even under low ceilings Low doorways, narrow aisles, high shelves: this is exactly what the full free lift is for. The forks lift first within the mast profile without the mast extending even a centimeter upwards. With an overall height of only 2,185 mm, the RR16HHE3L passes through doorways and intermediate floors where extending masts would have long since collided and stacks to full height as soon as there is space upwards. The same applies throughout the warehouse: 836 mm overall width, a turning radius of 1,506 mm, and a working aisle width of 2,356 mm (pallet 800x1200 lengthwise). You can maneuver safely where space is tight: between rows of shelving, in the block storage area, or on the ramp. Millimeter precision, all day long The proportional lift and lowering control executes every movement exactly as you specify on the ergonomic tiller: quick lifting, sensitive and millimeter-precise lowering in the upper shelf level. This prevents pallets from being bumped and goods from being damaged, even with operators who have little experience. The low-maintenance AC drive operates energy-efficiently and handles inclines of up to 16%, and the multi-function display shows battery level and speed at a glance. The 24 V / 205 Ah lithium battery can be easily recharged at any time without a memory effect; the 24 V charger is included. And behind it stands the manufacturer itself: spare parts warehouse, its own workshop, personal advice. Technical data - Manufacturer (abbreviation): SCHORR - Manufacturer's type designation: RR16HH500E3L - Load capacity: 1.6t - Model: 500E3L - Weight including batteries: 1165kg - Drive: Electric - Tires: Polyurethane - Overall length: 1975mm - Overall width: 836mm - Lift: 5000mm - Free lift: 1715mm - Lift mast height lowered: 2185mm - Lift mast height raised: 5445mm - Fork dimensions: 65mm x 170mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2356mm - Turning radius: 1506mm - Travel speed with/without load: 5.0km/h / 5.5km/h - Lift speed with/without load: 0.13m/s / 0.16m/s - Lowering speed with/without load: 0.22m/s / 0.13m/s - Max. climbing capacity with/without load: 8% / 16%

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension Rcsdpfx Ahjni Udzecef BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: new, empty load weight: 6,842 kg, maximum load weight: 32,158 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2026, Equipment: ABS, Unladen weight: 6,842 kg, permissible gross weight: 39,000 kg, load securing with certificate, loading area (L x W x H): 13,620 mm x 2,480 mm x 2,730 mm, tyre size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle, pallet box, electronic braking system (EBS), toolbox, self-steering trailing axle, bolted chassis, 1x15 and 2x7-pin connectors, antispray system, alloy rims, telematics system, tyre pressure monitoring, buffer stops, reinforced chassis, heavy duty chassis. You can find our complete vehicle range at . Looking for financing? With our Value Added Services, we offer you tailored financing solutions, full service and telematics solutions. We will be happy to advise you. Rcedpfxoy Eibze Ahcef

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch Rjdpfx Aofxyirohcecf :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204 Rjdpfx Ahozpgh Djcocf

Condition: used, mileage: 93,959 km, power: 174 kW (236.57 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,200 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 7, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 77053A The vehicle is located at our premises: Am Grün 1, 35066 Frankenberg (Eder) Mercedes-Benz V-Class V 300 d AVANTGARDE EDITION Long Used car in obsidian black metallic – elegant appearance, high level of travel comfort and plenty of space for family, business or shuttle services. First registration: 24.01.2023. ----Highlights of the equipment (excerpt) * AMG Line for a sporty design and distinctive appearance * AVANTGARDE including V-Class AVANTGARDE EDITION * 9G-TRONIC automatic transmission for relaxed driving * Panoramic glass roof: glass sliding/tilting sunroof, electric + fixed panoramic roof * Digital extra: hard drive navigation for precise route guidance * Active Distance Assist DISTRONIC for more comfort on long journeys * 360° camera for safe maneuvering in everyday use * TEMPMATIC in the rear: semi-automatically controlled air conditioning system in the rear as well The first generation of the V-Class stands for high-quality interior, confident suitability for long distances and a versatile interior – ideal if you are looking for a long Mercedes V-Class with premium features, a panoramic roof, DISTRONIC and AMG Line. Equipment lines and packages * CU4 Aerodynamics package * PS2 AMG Line * VQ1 AVANTGARDE * MX0 BlueEFFICIENCY package * JP2 Driving Assistance Package * Z3N Night Package * EZ6 Parking package with 360-degree camera * SA8 Seat comfort package * FP3 Mirror package * ZH8 V-Class AVANTGARDE EDITION Rjdpfxoyl S Upe Ahcocf Exterior * XI2 Model year G2-I * T14 Active door lock for sliding door * FB4 AMG spoiler on tailgate * C1L AMG front bumper with decorative elements in black * R1U AMG light alloy wheels 8 J x 19 black * QA4 Trailer load 2500 kg * Q50 Trailer coupling, ball head, removable * LB9 Door exit lights * F69 Exterior mirrors, electrically adjustable, heated and with integrated indicators * F65 Exterior mirrors, automatically folding in * F3S Exterior mirrors, painted black * IB6 Model series C447 Vito/V-Class * RK1 Tires 245/45 R19 * RD9 Tires without specification of manufacturer * FK5 Side sill trim, black, anodized * BS1 Brake calipers with Mercedes-Benz lettering * BB7 CO2-optimized brake system * V36 Roof liner * T56 Electric operation for sliding door, left * T55 Electric operation for sliding door, right * W16 Window, front left, fixed in side wall/sliding door * MG9 Generator management * XA5 Weight variant 3,200 kg * KB5 Main tank 70 liters * IL1 Domestic - code * RM4 Comfort tires * IK0 Complete vehicle * HX1 Refrigerant R-1234yf * FK4 Radiator grille, painted black * LG2 LED Intelligent Light System * IL6 Metallic paint * E34 Buffer battery for starting process * IN2 Wheelbase 3200 mm, long overhang * RF1 Tire manufacturer Continental (10) * R22 Wheel size group 2 * RX1 Wheels without manufacturer specification * T19 Sliding door, left * LG4 Rear, brake and indicator lights in LED technology * CN1 Sill exterior * CM2 Bumpers and attachments painted in vehicle color * LC8 Ambient lighting, tailgate * LC5 Ambient lighting in the exterior mirrors * H20 Heat-insulating glass all around Interior * US5 3-seater bench seat, comfort, 2nd row, outer seat folding * F66 Lockable glove compartment * SE1 Active seat ventilation for front passenger seat * SE0 Active seat ventilation for driver seat * LC1 Ambient lighting * VL7 AMG floor mats * FB1 AMG trim elements * U73 Armrests for seating in the passenger compartment * FS5 Illuminated mirrors for sun visors * LC7 Lighting for front footwell * L

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), first registration: 03/2026, fuel type: electric, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * Ambient lighting, 30 colors * Armrests for front seats, on both sides * Windshield in heat-protection glass, with heating function * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, with separate control on the left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * Mobile phone interface "Comfort" with inductive charging function * Navigation system "Discover Pro" * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic Distance Control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, backup horn, and towing protection * Driver assistance system "Travel Assist" including lane keeping assist "Lane Assist" and "Emergency Assist" Rodpjwz T Epjfx Ahcecf * Emergency brake assist "Front Assist" with pedestrian and cyclist detection * Automatically dimming interior rearview mirror * Proactive occupant protection system in conjunction with "Front Assist" * Power steering, electromechanical, speed-dependent * Rear view camera "Rear View" * Windshield wiper intermittent control with rain sensor * Lane change assist "Side Assist" * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 light alloy wheels "Solna" 8 J x 20 at the front, with 10 J x 20 at the rear, in black, polished surface * Trailer hitch, foldable, with electrical release * Deletion of trim for the infotainment display, central control elements, and steering wheel from electric white to black * Assistance package "Plus" including area view "Area View" with rear view camera "Rear View" * Swerve support and turning assistant * Driver-side exterior mirror, convex; passenger-side exterior mirror, convex * Exterior mirrors, electrically adjustable, foldable, and heated, with passenger-side mirror lowering function * Three-point automatic safety belts in the front with belt and end-fitting tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Trim for the infotainment display and central control elements in black * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150 kW; base engine: N06/N07 * Transmission for electric drive (1-speed) * IQ.LIGHT - LED matrix headlights with automatic headlight control, bad weather light, and welcome function * Climatronic air conditioning system "Air Care Climatronic" with active combination filter, stationary air conditioning, and 2-zone temperature control * Comfort seat on the left and right, in the 1st row of seats * Short wheelbase, short rear overhang * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 at the front, 10 J x 20 at the rear, in black, polished surface * Headlamp range adjustment, dynamic, with dynamic cornering light * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in artificial leather, with touch operation, and heated * LED rear lights with dynamic turn signal * Parking assistant "Park Assist Plus" incl. parking assistance * Radio "Ready 2 Discover" with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear view camera "Rear View" as an alternative to the area view "Area View" in the "Plus" assistance pac