Centerless tube linisher / belt linisher
Working capacity (Ø mm) 10-114
Abrasive belt motor (kW) 3
Centerless motor (kW) 0.18
Gu9en20
Abrasive belts dimensions (mm) 75x2000
Dimensions (mm) 1350x650x1200
Weight (kg) 120
Drawbar tractor
SN: 46400375
Hours of use: 2.629 h
Maximum speed: 30km/h
Engine power: 29kW at 2800 rpm
Engine capacity: 1.848cm³
Fuel type: Diesel
Unladen weight: 1,495 kg
Permissible total weight: 2,100 kg
Overall dimensions (L x W x H): 3,000 x 1,400 x 2,020 mm
All-wheel drive 4x4
Completely overhauled!
PTO: front and rear
Transmission: hydrostatic transmission
Hydraulic steering: available
Rear tyres: 33 x 12.50 - 15
Cylinders: 4
Front tyres: 23 x 10.50 - 12
with power lift front and rear
By...
Linishing machine for flat parts or rectangular tubes.
Working capacity (mm) 120x140
Abrasive belt speed (m/s) 20
Abrasive belts (mm) 120x1850
0mymgfhr
Conveyor belt speed (m/min) 12 or 6+12
Abrasive belt motor (kW) 3
Consumption (A) 7
Dimensions approx. (mm) 975x880x1800
Weight approx. (kg) 350
Turning tool holder, CNC internal turning tool holder
-Different sizes
Qk2o0jszp
-Outer diameter: Ø 63 mm
-Sale: as a package
-Weight: 9.5 kg
clamping socket
Pos - No. 62
manufactured by Weinig
clamping socket forprinting element D 30 mm
Bn0mmkqzid
1 piece
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
2x holder for stitching heads
Vqxhxq
Pendulum holder
Make Mapal
Type SMP 3
MK 4
Inner diameter 25 mm
Mapal 11.9
Bhz08wns7z
Weight 3,5 kg in wooden box
10
Driven tool holder
Mwpps8
Suitable for : Traub TNS 30/42
Type : VDI 30
Weight approx. : 5,2 kg
Quick change steel holder set
Phwy7
Basic holder with 2 pockets
Basic holder, dim: 124 x 124 x 80 mm high.
Mounting hole: 20 mm.
Prism distance, middle - middle: 84 mm.
Steel holder, dim: 132 x 47 x 63 mm high.
Steel holder mounting, dim: 27 mm high, 22 mm deep.
Clamping screws: M 12 with 12 x 12 mm.
Incl. clamping key 12 x 12 mm.
Weight: approx. 15 kg. Shipping possible.
The set can be visited after arrangement and is immediately available.
Please also note my other advertisements.
Milling tool holder arbor
Qlsdtvffp
-Recording: PK50
-Mill: Ø 32 mm
-Weight: 7 kg
General Location Bremen Condition used Other
8 minutes hot holding
pipes DN 80
length: 647 meters
Manufacturer: Tetra Pak
Gix2o7z
weight approx. 7 t
Remarks 6 height adjustable feet; minor dents in the insulation jacket; insulation jacket is missing in 2 parts (see photos)
Heat exchanger last use Dairy insulation available Material insulation jacket stainless steel
Tube chamber material tubes AISI304 (V2A) 1.4301
Technical data / dimensions Total height 3,200 mm Total width 1,550 mm Total ...
Rotary table with base in aluminium system profile
BOSCH REXROTH aluminium system profile
Turntable under construction: Ø 220 mm
Base plate turntable steel L x W x H: 760 x 760 x 20 mm
Construction height only turntable: 70 mm (base to top of turntable)
Nj3pj
Frame aluminium: 60 x 90 mm
-very stable bearing rotary table, can be rotated by hand
-Turntable with position sensing electrical position switch 1 position
-Aluminium structure (painted orange)
-stable substructure made of aluminium system...
Steel holder make BöniTyp 125 B nmade in Switzerlandmith prism groove 6 mmwidth of steel holder 125 mmmmaximum steel height 35 mmSteel width 25 mmWeight 2.3 kg
Bdl3vrq8a
7
Driven tool holder
Suitable for : Traub TNS 30/42
Type : VDI 30
Weight approx. : 5,2 kg
Ccx2upcky
Technical data:
- total width approx. 960 mm
- Work surface length / track length approx. 470 mm
Bmfawzd8gd
- Working surface depth / track depth approx. 165 mm
- Compression foot approx. W 100 x D 120 x H 160 mm
- Total depth approx. 370 mm
- round horn approx. 240 mm
- square horn approx. 240 mm
- through round hole in track approx. 30 mm
- through square hole in track approx. 30 mm
- Anvil height approx. 420 mm
- Weight approx. 205 kg
- Timber trunk Substructure approx. W 550 x D 550 x H...
Quadruple tool holder, quadruple tool holder, quadruple tool holder for turning tools
Cumtual
-Size: 160 x 160 mm
-Insertion height: max. 50 mm
-Weight: 18 kg
General Location Bremen Condition used Other
8 minutes hot holding
pipes DN 80
Fqxo9j7a
length: 647 meters
Manufacturer: Tetra Pak
weight approx. 7 t
Remarks 6 height adjustable feet; minor dents in the insulation jacket; insulation jacket is missing in 2 parts (see photos)
Heat exchanger last use Dairy insulation available Material insulation jacket stainless steel
Tube chamber material tubes AISI304 (V2A) 1.4301
Technical data / dimensions Total height 3,200 mm Total width 1,550 mm Total...
Climate
**Holder sweeper Multicar C 270
**
year 2016
Pcwbp
read sweeping hours 4.714 h
221-14
**Changes, errors and prior sale reserved!
Used machine without warranty !
**
Stahlhalterschnellwechselsystem
Make Wohlenberg
12 steel holder for rectangular steel
1 cylindrical mount diameter 50 mm
X0u8apwrm
Diameter steel holder 42 x 32 mm
Distance from Center to Center Prism 145 mm
7
Driven tool holder
Ddnvuov
Suitable for : Traub TNS 30/42
Type : VDI 30
Weight approx. : 5,2 kg
Steel holder Trautwein / Parat, following types are available from stock:
- WD 20/12
- WD 20/20
- WD 23/40
- WDR 20/12 (one bolt broken)
- WDPL 23/40
- WD 23/50
Pvpuo3
- WDR 23/40
- WB 23/600
Please ask for the respective quantity individually.
Turning tool holder, CNC internal turning tool holder
-Outer diameter: Ø 60 mm
-Sale: as a package
-Weight: 2 kg
Dufale
.
Bynx0jqlkk
10 pieces used
.
VDI 30 recordings (P2)
.
1 lot = 9 pcs. partly big carbide lathe tool holder make SANDVIK used€ 350,--
Bftadrl0tq
Four-way tool post
Dsrgcvq
Steel height 60 mm
Dimensions: L 190 x W. 185 mm
7
Driven tool holder
Suitable for : Traub TNS 30/42
Type : VDI 30
Weight approx. : 5,2 kg
Byu9fghqss
Nozzles, injection nozzles, diesel engine nozzles
-Type: 214 5079
-Number: 10 pieces available
Grsbl9x
-Price: per piece
-Weight: 0.4 kg
.
12 pieces used
.
Ebhkour
VDI 30 recordings (P1)
5
1. clamping plate with base cabinet, manufacturer: WEYRAUCH, dimensions: approx. 1.000 mm x 800 mm + digital height measuring and marking device, manufacturer: MITUTOYO, marking height: 1.000 mm
Bykxhp8akh
Tap holder with torque adjustment Make BilzTyp DSPL 4Setting range : M14 - M33max. shank diameter 24mmges. Length 350 mmBJ estimated
Bftum777tt
6
Driven tool holder
Suitable for : Traub TNS 30/42
Cw08rc0m
Type : VDI 30
Weight approx. : 5,2 kg
Motor output:4 kW
Bfvy2naerj
Overall size:705x705x1800 mm
Tool holder, turning tool holder, tool holder, turning tool, turning tool holder
-Mass perforated plate: see pictures
Qlxzdrhmq
-Dimensions: 175/165/H65 mm
-Weight: 6.6 kg
.
Size C
Cem2ycda
with cylindrical bore 40 / 50 mm
.
12
Sold are all 5 Powered tools
Bty9wxtvsb
- operating pressure: 50 - 500 bar
- flow rate: 9 - 30 l/min
- sound power level LpA, LwA + 1,5 dB: 82 dB, 99 dB
- power, pumping rotation speed, water inlet pressure, max. water inlet temperature: 30 kW, 1057 rpm, 2,5 bar, 40 °C
- power-on time (hours/day): 24/1
- electrical connection/fuse, cable length: 400 V, 50 Hz, 63 A, 5 m
Byqa0qbrlj
- electric engine, max. power/power output, speed, idle speed, cooling system: 36 kW, 30 kW, 0 rpm, 1480 rpm, air
- water tank capacity: 90 l
- safety switch...
7
Driven tool holder
Suitable for : Traub TNS 30/42
Type : VDI 30
Byu9btzncg
Weight approx. : 5,2 kg
HSK 100 tool holder from Sandvik
Vushme
Quick change tool holder, tool holder head, quick change tool holder
-Recording dimensions: 110 mm
-Length: 200 mm
327okjff
-Insertion height: 40 mm
-Number: 9 steel holders available
-Price: per piece
-Weight: 4 kg/piece
4 units tool holder set
Puf0vq
62 tool holders HSK 100-A / 125B
drawer insert 585 x 595 x 65 mm
weight approx. 26 kg
