Used Air Cooled Water Chiller for sale (36,759)

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. Ihodpfx Ahskw Ukuo Nst •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,025 kg, total length: 2,382 mm, total width: 806 mm, total height: 1,681 mm, motor manufacturer: Johnson Controls, power: 250 kW (339.91 HP), 2x new and originally packaged Johnson Controls YORK YCSE chillers. Stored on pallet. Iodpjx Hg Inefx Ah Njht

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Ijdpsx E S Tyjfx Ah Neht Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Technical data sheet available on request

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: AST2 190HE-MWT - 2200370969, cooling capacity: 539 kW (732.84 HP), type of input current: three-phase, type of cooling: water, overall weight: 5,098 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 92.1 m³/h, pump pressure: 3.4 bar, total width: 2,191 mm, total length: 5,445 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 190 HE-MWT – 539 kW Manufacturer: MTA S.p.A. The Aries TECH AST2 190 HE-MWT are compact air-cooled chiller units suitable for outdoor installation (from -20°C to +48°C), equipped with a shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P3 twin pump, 800-liter buffer tank, electric frost protection heater, EC fans, condenser filter, and control panel. Comes with a new condenser coil. Chilled water outlet temperatures adjustable from -10°C to +20°C. Cooling capacity (kW): 539 Chilled water temperature out / in (°C): 7 / 12 Flow rate (m³/h): 92.1 Available pump pressure (Bar): 3.4 Ambient temperature (°C): 32 Iedpfxsx E S S Nj Ah Nsht Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Number of capacity stages: 6 Electrical data: Voltage: 400 V, frequency: 50 Hz, phases: 3 Max. power consumption (kW): 261 Max. current (A): 431 Starting current per circuit (A): 636 Protection class: IP54 Dimensions: Length (mm): 5445, Width (mm): 2191, Height (mm): 2423 Weight (kg): 5098 (operating weight) Connection: DN 125 (Vitaulic) Serial no.: 2200370969 Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (Used machine) Price: on request in EUR (plus VAT, ex works Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Air condenser from an ammonia refrigeration system with a maximum output of 180 kW. Additional title: radiator Iedpfx Ajxzqtueh Nsht Performance per fan: 2 kw Position: to be installed outdoors on site Base construction: Housing with fans and coolers Features: 3 fans, Alpine main switch

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. Ihedpexvca Ajfx Ah Not 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: excellent (used), Riedel Riedel Industrial Chiller / Chiller – Type SC 101.2M4LE.l For sale is a professional Riedel chiller from the SC series, type SC 101.2M4LE.l. This unit was previously used in an industrial environment and is suitable for reliable process cooling—for example, for lasers, CNC machines, printing presses, plastics processing, or any application requiring consistently temperature-controlled cooling water. The unit has had only around 25 hours of operation and is therefore in excellent condition. This chiller is air-cooled and uses refrigerant R134a. Technical specifications: Model: Riedel SC 101.2M4LE.l Cooling capacity: approx. 10–11 kW Cooling medium: Water / Water-glycol mixture Refrigerant: R134a Operating voltage: 400V / 3~ / 50 Hz Integrated circulation pump and stainless steel tank Air-cooled with large axial fan (top-mounted) Microprocessor control with temperature display Pressure gauge on the front Compact, service-friendly design Dimensions: 540 mm (width) × 1048 mm (height) × 700 mm (depth) Weight: 159.5 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) If you have any further questions, please feel free to contact us by phone. Ihodsxyxtyspfx Ah Net

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), type of input current: AC, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 8 bar, pump pressure: 3 bar, total width: 2,257 mm, total length: 9,003 mm, total height: 1,559 mm, control cabinet height: 1,559 mm, Equipment: cooling unit, We are dismounting a Steam methane Reformer plant for hydrogen. In this case we have one Kelvion Adiabetic Air Cooler - Cooling Water. Technical information in the documents attached. Iedpfxexg Ncrj Ah Njht

Condition: used, Year of construction: 2016, cooling capacity: 301 kW (409.25 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, volume flow: 359 m³/h, total width: 1,420 mm, total length: 5,400 mm, total height: 2,300 mm, Equipment: compressor, Industrial chiller for technology water GWK Sklc 260.1 Gas: R134a Isdpfx Ajx Dddrjh Neht Year: 2016 Capacity: 301 kW Circular pump is not included. Check out our other products.(Re-pelletizing line, Shreddr, grinder, washing-line)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TAG050/HE-BIO-FSH - 2200415896, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,253 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 18.9 m³/h, pump pressure: 1.18 bar, total width: 1,110 mm, total length: 3,407 mm, total height: 2,155 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler/ Chiller/ Air-Cooled Water Chiller, Type: Taurus TAG 050/HE-BIO-FSH Manufacturer: MTA S.p.A. The Taurus TAG 050/HE-BIO-FSH are compact water chiller units, suitable for outdoor installation, including a hydronic kit (200 l tank + pump), designed for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Cooling capacity: 111 kW Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 18.9 m³/h Available pump pressure: 1.18 bar Ambient temperature: 32°C Refrigerant: R 454B Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Iodpsw Tbqvofx Ah Noht Max power input: 51 kW Max current: 85 A Starting current circuit: 302 A Protection class: IP54 Dimensions: Length: 3407 mm, Width: 1110 mm, Height: 2155 mm Weight: 1253 kg Connection: Rp 2 1/2" Serial no.: 2200415896 Year of manufacture: 2024 Condition: Visual grade 1, technically OK Stock unit, as new (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: ready for operation (used), KLH Kältetechnik W15.HL6 Peripheral Unit Air-Cooled Water Chiller Cooling Device Year of manufacture: 2010 Dimensions: 1100mm x 800mm x 1620mm (L x W x H) Iodpfoxxa Hrex Ah Neht Weight: 288 kg You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data deviations as well as errors in the item description may occur and are reserved.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Ihsdpexqnydofx Ah Njt Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Weight (kg): 4428 Connection: Victaulic DN 125 Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!)

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AST2 115 HE - 2200394103, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,181 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 53.8 m³/h, pump pressure: 2.99 bar, total width: 2,190 mm, total length: 3,425 mm, total height: 2,537 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 115 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 115 HE is a compact air-cooled chiller designed for outdoor installation (ambient temperatures from -20°C to +48°C), equipped with a shell-and-tube evaporator, four scroll compressors, compressor shut-off valves, crankcase heaters, phase monitoring, P3 double pump, 598-liter tank, electric frost protection heater, condenser filter, and control and switch cabinet. Cooling capacity (kW): 315 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 53.8 Available pump pressure (bar): 2.99 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Number of refrigeration circuits: 2 Number of compressors: 4 Capacity stages (%): 0-25-50-75-100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 158 Max. current (A): 262 Starting current per circuit (A): 507 Protection class: IP54 Dimensions: Iedow R A S Aspfx Ah Neht Length (mm): 3,425 Width (mm): 2,190 Height (mm): 2,537 Weight (kg): 2,583 / 3,181 (transport / operating weight) Connection: DN 100 (Vitaulic) Serial No.: 2200394103 Year of manufacture: 2023 Condition: Visually: 2, Technically: OK & tested (Used unit) Price: on request in EUR (plus VAT ex works Nettetal) – 3 months warranty MTA offers, upon request and together with the buyer, a functional test of the chiller prior to collection at the Nettetal branch. Used machines may show visual wear due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: AST2 140 HE - 2200358437, cooling capacity: 371 kW (504.42 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,271 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 63.5 m³/h, pump pressure: 2.33 bar, total width: 2,191 mm, total length: 3,465 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Model: Aries TECH - AST2 140 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 140 HE are compact chiller units designed for outdoor installation (from -20°C to +48°C), equipped with four scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P2 pump, 710-liter tank, electric frost protection heater, condenser filter, control and switch cabinet, and a complete housing. Cooling capacity (kW): 371 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 63.5 Available pump pressure (bar): 2.33 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Refrigeration circuits (number): 2 Compressors (number): 4 Capacity stages (%): 0-25-50-75-100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 187 Max. current (A): 300 Starting current circuit (A): 633 Protection class: IP54 Dimensions: Length (mm): 3465, Width (mm): 2191, Height (mm): 2423 Weight (kg): 3271 Connection: DN 125 (Vitaulic) Ijdpfx Asxn Sxxjh Nsht Serial No.: 2200358437 Year of manufacture: 2020 Condition: Visual: 2, Technical: OK & tested (Used equipment) Price: On request in Euro (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request together with the buyer, a functional test of the chiller unit prior to collection at the Nettetal branch. Used machines may have optical defects due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Iedpfx Ahjwzay Tj Nsht Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: ASG2 160SSN - 2200412505, cooling capacity: 390 kW (530.25 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,211 kg, ambient temperature (max.): 47 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 66.7 m³/h, pump pressure: 2.97 bar, total width: 2,191 mm, total length: 4,505 mm, total height: 2,423 mm, warranty duration: 3 months, Process Chiller / Air-cooled Water Chiller Manufacturer: MTA S.p.A. Model: Aries G ASG2 160 SSN (R454B) - Super Silent Noise The Aries ASG2 160 SSN are compact water chillers designed for outdoor installation (from -20°C to +47°C), equipped with crankcase heater, phase monitoring, shell-and-tube evaporator, six scroll compressors, electronic expansion valves, compressor shut-off valves, buffer tank, P3 twin pump, electric trace heating, condenser filter, winter control with speed-controlled fans, as well as control and switch cabinet. Cooling capacity (kW): 390 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 66.7 Isdpfx Ahex Eg Uvj Noht Available pump pressure (bar): 2.97 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R454B, GWP 466, A2L Refrigeration circuits (number): 2 Compressors (number): 6 Stages: 6 Electrical data: Voltage V 400, Frequency Hz 50, Phases 3, Max. power consumption (kW): 193 Max. current (A): 319 Starting current circuit (A): 582 Protection class: IP54 Dimensions: Length (mm): 4,505, Width (mm): 2,191, Height (mm): 2,423 Weight, empty/operating (kg): 3,275 / 4,211 Connection DN 125 (Victaulic) Serial no.: 2200412505 Year of manufacture: 2024 Condition: Optical: 2, Technical: OK & checked Used Price: On request in Euros (plus VAT, ex-works Nettetal) MTA, upon request, offers the buyer a functional test of the chiller together with the customer before collection at the Nettetal branch. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TEG301P3-20 - 2200405054, cooling capacity: 58.4 kW (79.40 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,063 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 9.94 m³/h, pump pressure: 3.14 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,172 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller set Manufacturer: MTA S.p.A. Model: TAE G 301 P3-20 – R454B The TAE G 301 P3-20 units are air-cooled compact water chillers suitable for outdoor installation down to -20°C. Features include crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, integrated P3 circulation pump, and winter package (condenser pressure control). Cooling capacity: 58.4 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 9.94 Available pump pressure (bar): 3.14 Ihjdjx A A Igspfx Ah Not Ambient temperature (°C): 32 Refrigerant: R454B Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. power consumption (kW): 31 Max. current (A): 54 Starting current (A): 168 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2172 Weight (kg): 1063 Connection: Rp 2" Serial No.: 2200405054 Year of manufacture: 2023 Condition: Visual grade 2, Technically OK Used Used machines may have visual imperfections due to previous usage. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: TET702P3-20 - 2200356884, cooling capacity: 136 kW (184.91 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,131 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 23.1 m³/h, pump pressure: 3.19 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Water Chiller Manufacturer: MTA S.p.A. Model: TAEevo Tech 702 P3-20 – 136 kW The TAEevo Tech 702 P3-20 units are air-cooled compact water chillers, designed for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678-liter buffer tank, integrated P3 circulation pump, and winter operation control down to -20°C. Cooling capacity: 136 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 23.1 Available pump pressure (bar): 3.19 Ihodpfx Ahex A Agve Njt Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input (kW): 70.48 Max current (A): 119.28 Starting current (A): 235.01 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2131 Connection: Rp 3" Serial No.: 2200356884 Year of manufacture: 2020 Condition: Visual grade 2, Technically sound (used) Price: On request in Euros (plus VAT ex Nettetal) – 3 months warranty Used machines may show optical imperfections due to their previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET081P3-20 - 2200401041, cooling capacity: 22.5 kW (30.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 475 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 3.82 m³/h, pump pressure: 2.69 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit Manufacturer: MTA S.p.A. Model: TAEevo Tech 081 P3-20 – 22.5 kW The TAEevo Tech 081P3-20 is a compact, air-cooled water chiller, suitable for outdoor installation (operating temperature range: -20°C to +46°C). Includes crankcase heater, phase monitoring, 140 L buffer tank, and integrated P3 circulation pump. Additional Equipment: • Retrofitted speed control for axial fans • Bypass valve between water outlet and inlet • Flow control valves installed at water inlet and outlet • Closed filling system added • Bypass Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 22.5 kW Chilled water temperature, outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 3.82 Available pump pressure (bar): 2.69 Ihodpfex Az R Hex Ah Not Ambient temperature (°C): 32 Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 12 Max. current (A): 20 Starting current circuit (A): 115 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 475 Connection: Rp 1 1/2" Serial No.: 2200401041 Year of manufacture: 2023 Condition: Visual grade 2, Technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may show cosmetic imperfections due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: OCTME500 - 2200384707, type of input current: three-phase, cooling capacity: 136 kW (184.91 HP), overall weight: 622 kg, input voltage: 400 V, volume flow: 23.4 m³/h, warranty duration: 12 months, type of cooling: water, temperature: 7 °C, total height: 1,200 mm, total length: 1,950 mm, total width: 785 mm, pressure: 10 bar, Equipment: type plate available, Split Chiller, Water-Cooled Chiller - Indoor Installation Manufacturer: MTA S.p.A. Model: OCEAN Tech OCTME 500 – 136 kW The OCEAN Tech OCTME 500 is a water-cooled chiller unit designed for indoor installation in split configuration (without condenser), supplied without a hydraulic circuit (without pump and buffer tank), including crankcase heater and phase monitoring. Cooling capacity: 136 kW Chilled water temp. outlet/inlet: 7 / 12°C Flow rate: 23.4 m³/h Condensation temperature: 45°C Refrigerant: R 410A Electrical Data: Voltage (V): 400; Frequency (Hz): 50; Phases: 3 Max. power consumption (kW): 60 Max. current (A): 103 Starting current circuit (A): 311 Protection class: IP22 Dimensions: Length (mm): 1950; Width (mm): 785; Height (mm): 1200 Weight (kg): 622 Chilled water connection: G 2" ½ B Refrigerant connection Ø (mm): 28 / 35 ODF Iodpfxexxtk Ro Ah Njht Serial no.: 2200384707 Year of manufacture: 2022 Condition: Visual 1 (excellent), Technically OK (stock unit, as new) Price: on request (Subject to technical changes and prior sale!)

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: OCTME230 - 2200388958, type of input current: three-phase, cooling capacity: 66.2 kW (90.01 HP), overall weight: 383 kg, input voltage: 400 V, volume flow: 11.4 m³/h, warranty duration: 12 months, type of cooling: water, temperature: 7 °C, total height: 1,200 mm, total length: 1,735 mm, total width: 660 mm, pressure: 10 bar, Equipment: type plate available, Split-Type Chiller, Water-Cooled Chiller Unit Manufacturer: MTA S.p.A. Model: OCEAN Tech OCTME 230 – 66 kW The OCEAN Tech OCTME 230 is a water-cooled chiller unit for indoor installation in split version (without condenser), supplied without hydraulic kit (pump, buffer tank) but including crankcase heater and phase monitoring. Cooling capacity: 66.2 kW Chilled water temperature (outlet/inlet): 7 / 12°C Flow rate: 11.4 m³/h Condensing temperature: 45°C Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 27 kW Max. Current: 45 A Starting Current (circuit): 178 A Protection class: IP22 Dimensions: Length: 1,735 mm, Width: 660 mm, Height: 1,200 mm Weight: 383 kg Chilled water connection: G 2" B Refrigerant connection Ø (mm): 22 / 28 ODF Serial no.: 2200388958 Year of manufacture: 2022 Condition: Visual 1, Technically OK (storage unit, as new) Price: on request Ihsdpexxq U Tsfx Ah Njt (Technical changes and prior sale reserved!)

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET502P3-20 - 2200387388, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller, refrigeration unit, air-cooled chiller Manufacturer: MTA S.p.A. Model: TAEevo Tech 502 P3-20 The TAEevo Tech 502P3-20 is a compact, air-cooled water chiller designed for outdoor installation (ambient temperature range: -20°C to +46°C). Chilled water setpoints adjustable from -10°C to +30°C. Includes crankcase heater, phase monitoring relay, 500-liter buffer tank, integrated P3 circulation pump, and fan speed control. Cooling capacity: 105 kW Chilled water temperature, outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 17.9 Available pump pressure (bar): 3.42 Ambient temperature: 32°C Refrigerant: R 410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power consumption (kW): 55.09 Ihjdexxhwxjpfx Ah Njt Max current (A): 93.06 Starting current (A): 191.65 Protection rating: IP54 Dimensions: Length (mm): 3298, Width (mm): 1255, Height (mm): 2119 Weight (kg): 1748 Connection: Rp 2 1/2" Serial no.: 2200387388 Year of manufacture: 2022 Condition: Visual 2, technically sound Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Due to previous use, used machines may have cosmetic imperfections. (Technical specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET121P3-20 - 2200396021, cooling capacity: 35 kW (47.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 661 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 5.96 m³/h, pump pressure: 2.67 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Air Cooler / Chiller / Air-cooled Water Chiller Unit Manufacturer: MTA S.p.A. Model: TAEevo Tech 121 P3-20 TAEevo Tech 121 P3-20 units are air-cooled compact water chillers suitable for outdoor installation (ambient temperature range: -20°C to +46°C). Including crankcase heater, phase monitoring, 255 l buffer tank, integrated P3 circulation pump, and winter control (condenser pressure control down to -20°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Cooling capacity: 35 kW Chilled water outlet/inlet temperatures (°C): 7 / 12 Flow rate: 5.96 m³/h Available pump head: 2.67 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical data: Voltage: 400 V Frequency: 50 Hz Phases: 3 Max. power consumption: 19 kW Max. current: 33 A Starting current (circuit): 165 A Protection class: IP54 Dimensions: Length: 1862 mm, Width: 761 mm, Height: 1437 mm Weight: 661 kg Connection: Rp 1 1/2" Serial No.: 2200396021 Year of manufacture: 2023 Condition: Visual 2, Technically OK USED Price: on request in euros (plus VAT, ex works Nettetal) – 3 months warranty Isdpfx Ahsxxhl As Njht Used machines may show signs of cosmetic wear due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: TET802P3-20 - 2200356834, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 27.1 m³/h, pump pressure: 3.13 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled chiller unit, Model: TAEevo Tech 802 P3-20 Ihjdpfowltwgox Ah Nst Manufacturer: MTA S.p.A. The TAEevo Tech 802 P3-20 is a compact, air-cooled water chiller designed for outdoor installation (operation range: -20°C to +46°C). Features include crankcase heater, phase monitoring, electronic expansion valves, 678-liter buffer tank, integrated P3 circulation pump on the suction side, and winter control (condenser pressure regulation down to -20°C). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 159 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 27.1 Available pump pressure (bar): 3.13 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Maximum power input (kW): 79.48 Maximum current (A): 142.2 Starting current (A): 286.2 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2192 Connection: Rp 3" Serial No.: 2200356834 Year of manufacture: 2020 Condition: Visual: 2, Technically: OK (used) Price: On request in euro (plus VAT, ex works Nettetal) Used machines may show visual imperfections due to prior use. (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET251P5 - 2200384598, cooling capacity: 48.7 kW (66.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,034 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 8.26 m³/h, pump pressure: 4.93 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 251 P5 Manufacturer: MTA S.p.A. The TAEevo Tech 251P5 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -5°C to +46°C). It comes equipped with crankcase heater, phase monitoring, 350 L buffer tank, and an integrated P5 high-pressure circulating pump. Iedpewlr Eiofx Ah Nsht Chilled water outlet temperatures are adjustable from -10°C to +30°C. Cooling capacity: 48.7 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 8.26 Available pump pressure (bar): 4.93 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Maximum power consumption: 29 kW Maximum current: 50 A Starting current per circuit: 149 A Protection class: IP54 Dimensions: Length (mm): 2250 Width (mm): 866 Height (mm): 2054 Weight (kg): 1034 Connection: Rp 2" Serial No.: 2200384598 Year of manufacture: 2022 Condition: Visual 2, Technically OK Used Price: on request in EUR (plus VAT, ex-works Nettetal) – 3 months warranty Used machines may have visual imperfections due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal