Used Agricultural Telehandler for sale (2,660)

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft: 6000 kg Max. Reichweite: 21.70 m Aufwärtsneigewinkel: a4 12 ° Abwärtsneigewinkel: a5 110 ° Drehung des Oberwagens: 360 ° Antriebsräder (vorne / hinten): 2 / 2 Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang Typ Abstützung: Abstützung Teleskop Duplex Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig Anzahl Batterien / Batterie: 2 x 12 V 12V Batteriekapazität 120 Ah Anlaufstrom der Batterien (EN)850 A Batterietechnologie Lithium-ion Batteriekapazität 105 Ah Nennspannung der Batterie 624 V Maximale Spannung der Batterie 680 V Batterieenergie 65 kW/h Nennleistung des Elektromotors 107 kW Hydraulische-Motorleistung 84 kW Ladegerät Leistung / Phase / Stromtyp 11 kW / Single-phase or three-phase / AC Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 Max. Fahrgeschwindigkeit 37 km/h Zugkraft 8600 daN Kontinuierliche Zugkraft 4300 daN Parkbremse Automatische negative Parkbremse Festellbremse Ölbad Lamellenbremsen an den Vorder- und Max. Steigfähigkeit - beladen / unbeladen 36 % / 48 % Kontinuierlich überwindbare Steigung (beladen / unbeladen) 18 % / 23 % Hydraulisch Iedpfx Ahsz N Imysbotn Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge 175 l/min Hydraulikfördermenge – Hydraulikdruck 350 bar Fassungsvermögen des Hydrauliktanks 200 l Geräuschpegel im Fahrerstand (LpA) 65 dB Umgebungsgeräusch (LwA) 103 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Lenkräder (vorne / hinten) 2 / 2 Steuerungen 2 Joysticks Kabinen-Zertifizierung Kabine ROPS - FOPS Stufe 2 Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Iedjz N In Depfx Ahbstn Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Rotating forklift Magni RTH 6.31 Ijdpfx Aszz Tixjhbetn Drive Diesel Year built 2026 Lifting height (mm) 31,000 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,170 mm, - Max. Tragkraft 6000 kg - Max.Hubhöhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW Ijdpfxozzrr Eo Ahbjtn - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, mileage: 92,803 km, power: 78 kW (106.05 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 07/2027, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,849 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Ijdpfx Ajz S Rkmehbjtn Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 Isdpey E Ugpefx Ahbjtn · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, Year of construction: 2022, load capacity: 7,000 kg, lifting height: 24,800 mm, total length: 8,870 mm, - Max. Tragkraft 7000 kg - höhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° Itsdpjy Eh Rhofx Ahbon - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 1987, gearing type: other, first registration: 01/1987, color: orange, mileage: 1,001 km, empty load weight: 870 kg, driver cabin: other, Vehicle location: Bovenden, Snow plow width approx. 3300 mm! Iedjxq E T Iepfx Ahbetn Working width approx. 2700 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Zoeller refuse collection body type Medium X2c21 with Zoeller Delta 2301 lifting/tipping device, dismantled from DAIMLER-BENZ Actros 2641 L 6x4 with 4200mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ijdpfxow U A Acs Ahbjtn

Condition: used, Year of construction: 2015, gearing type: other, first registration: 01/2015, color: orange, mileage: 1,001 km, empty load weight: 325 kg, driver cabin: other, Vehicle location: Bovenden, from Mitsubishi Canter 4x4! Plow width approx. 2400 mm! Plow height approx. 650 mm! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Ijdpfxex I Scme Ahbstn

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, overall weight: 9,000 kg, mileage: 1,001 km, empty load weight: 1,400 kg, maximum load weight: 7,600 kg, loading space volume: 4 m³, driver cabin: other, Vehicle location: Bovenden, Body: demountable salt spreader approx. 4 m³, removed from Daimler-Benz SK 1928 A 4x4! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted! Ijdpfx Asxxmqwehbetn

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). BMO Adapter Frame from Manitou Telehandler to Euro Mount / Year: 2023 / in stock & immediately available Price: €1,490.00 net / €1,773.10 gross Design with mechanical locking We have a very large selection of various attachments in stock that are immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. Ijdpfx Ajyxvhbjhbotn We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp product range! Errors and prior sale excepted! Internal ID: 702023 = Further Information = Intended use: Agriculture Suitable for: wheel loaders Please contact Marius Herden for further information.

Condition: used, Year of construction: 2022, load capacity: 25,000 kg, lifting height: 10,600 mm, · Schüttwinkel 106 ° · Kippwinkel 10 ° Iedpfxoycxn De Ahbstn · Wenderadius (über Räder) 5.50 m · Motornorm Stage V / Tier 4 · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 4567 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 157.34 kW / 155 kW · Max. Drehmoment / Motordrehzahl: 805 Nm@1500 rpm · Kühlsystem des Motors: Wassergekühlt · Anzahl Batterien 2 · Batterie / Batteriekapazität: 12 V / 120 Ah · Zugkraft: 20400 daN · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts): 2 / 2 · Max. travel speed: 25 km/h · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 31.50 % / 57.70 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge - Hydraulikdruck: 275 l/min - 350 bar · Motoröl 13 l · Hydrauliköl 290 l · Fassungsvermögen des Kraftstofftanks 315 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 75 dB · Umgebungsgeräusch (LwA) 109 dB · Schwingungsbelastung Hand/Arm: < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Steuerungen: JSM · Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Maximale Tragkraft 6.000 kg Maximale Hubhöhe 30,80 m Maximale Reichweite 26,90 m Drehbereich 360° (endlos) Stützen Typ Scherenstützen mit einzelnem Teleskopausschub (Patent von Magni) Motor Modell Volvo TAD 582 VE Stufe V Volvo TAD 552 VE Stufe IIIA Nennleistung 160 kW (218 PS) bei 2.300 U/min 160 kW (218 PS) bei 2.200 U/min Max. Drehmoment 925 Nm bei 1.380 U/min 910 Nm bei 1.450 U/min Hubraum 5.130 cm3 Zylinderzahl 4 in Reihe Bauart Dieselmotor mit Direkteinspritzung und Turboaufladung Kühlsystem Wassergekühlter Ladeluftkühler Fahrantrieb Typ Hydraulisch Max. Druck 480 bar Getriebe Dropbox 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt Achsen und Bremsen Typ Achsen mit Planeten-Endantrieben Vorderachse Pendel-Lenkachse mit automatischem Niveauausgleich +/-8 Grad Hinterachse Pendel-Lenkachse mit hydraulischer Sperre Anzahl der Lenkräder Allradlenkung Iedpfx Asy Abh Iohbetn Lenkungsarten Vorderrad-/Allrad-/Hundeganglenkung Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt Feststellbremse Negativbremse, hydraulisch betätigt Bereifung 445/65 R22.5 Leistungen Max. Fahrgeschwindigkeit 40 km/h Max. Zugkraft am Lasthaken 89 kN Maximale Anhängelast am Abschlepphaken 5.000 kg Steigfähigkeit 41 % Wenderadius (mit Gabelzinken) 6.730 mm Gewichte Leergewicht* 22.700 kg Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt)* 10.500 kg Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt)* 12.200 kg Füllmengen Dieselkraftstoff 270 l 270 l AdBlue 40 l / Hydrauliköl 160 l 160 l Motoröl 16 l 16 l Kühlmittel 40 l 40 l Arbeitshydraulik Anlagentyp Load-Sensing Betriebspumpe Verstellpumpe Max. Hydraulikfördermenge 170 l/min Max. Traglast Auslegerkopf 75 l/min Max. Betriebsdruck 350 bar Verteiler für Ausleger- und Oberwagenbewegungen Elektromagnetisches Proportionalventil, SIL 2 Bewegungssteuerung Zwei 2-Achsen-Joysticks von Danfoss mit Totmanneinrichtung

Condition: used, Year of construction: 2012, gearing type: other, first registration: 01/2012, color: black, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Dismantling of MAN TGS 28.400 6x4-4 BL with 3900 mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors reserved! Ijdpfxeyyc Hgj Ahbjtn

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,907 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Isdpfxsy Scnns Ahbotn Rear tires size: 400/70-20

Condition: used, functionality: fully functional, fuel type: diesel, lifting height: 17,550 mm, mast type: telescopic, Year of construction: 2015, operating hours: 1,850 h, construction height: 2,500 mm, drive type: Diesel, load capacity: 4,000 kg, machine/vehicle number: G 5363, Rigid telescopic forklift Iodsu D Tm Djpfx Ahbstn Chassis number: G 5363 Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Condition: 60 - 80% Roof cover, windshield, heating, full cab,

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB Iedpfxoz Rq Atj Ahbetn · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus Isdpew Ufixefx Ahbjtn 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, wheelbase: 189 mm, Scissor lift – High quality and reliability. The scissor lift is the ideal solution for all work at heights, offering safety, stability, and ease of use. Thanks to its compact design, it is suitable for both indoor and outdoor use. - High load capacity and stability – allows for work even with heavier equipment. - Easy operation – intuitive controls for maximum comfort. - Versatile applications – construction work, warehouse work, maintenance work, and much more. - Robust construction and durability – reliable operation for many years. Iodpfxov T I N Ie Ahbstn Invest in a modern solution that will increase your work efficiency! Contact us to learn more about available models and delivery options. DIMENSIONS: Maximum working height: 8.00 m / 10.00 m / 12.00 m / 13.80 m Maximum platform height: 6.00 m / 8.00 m / 10.00 m / 11.80 m Platform size (length × width × height): 2.26 x 0.81 x 1.1 m / 2.26 x 0.84 x 1.1 m / 2.29 x 1.12 x 1.1 m / 2.29 x 1.12 x 1.1 m Overall dimensions (length × width × height, railing not folded): 2.48 x 0.84 x 2.21 m / 2.48 x 0.84 x 2.32 m / 2.48 x 1.19 x 2.46 m / 2.48 x 1.19 x 2.58 m Overall dimensions: (length x width x height, with railings folded) 2.48 x 0.84 x 1.73 m / 2.48 x 0.84 x 1.85 m / 2.47 x 1.19 x 1.95 m / 2.47 x 1.19 x 2.07 m Platform extension: 0.9 m Minimum ground clearance: 0.1 / 0.02 m Wheelbase: 1.89 m Machine weight: 1880 kg / 230 kg / 2540 kg / 2880 kg PERFORMANCE: Rated load: 380 kg / 230 kg / 320 kg / 320 kg Safe working load of extended platform: 113 kg Turning radius (inside wheel/outside wheel): 0 / 3.1 m Lift/Travel Motor: 24V/3.3kw / 24V/3.3kw / 24V/3.3kw / 24V/4.5kw Lifting Speed: 3-5m/min Travel Speed (folded): 3.5km/h Travel Speed (extended): 0.8km/h Maximum Gradeability: 25% Maximum Permissible Working Angle: 1.5°/3° Tires: 381x127 mm Battery: 4x6V/200ah / 4x6V/200ah / 4x6V/200ah / 4x6V/240ah Lithium Battery (optional): 24V/230ah Charger: 24V/30A KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,700 kg, The modern VIP27 mini excavator is a professional, durable machine. The VIP27 model is the ideal choice for demanding construction, electrical, plumbing, renovation companies, as well as service providers in related industries. The VIP27 is additionally equipped with a swing boom, significantly facilitating work on confined job sites. The machine is also fitted with extendable tracks, ensuring improved stability and flexibility. We offer reliable after-sales support. The mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust chassis and is suitable for use under all conditions. TECHNICAL DATA: Model: VIP 27 Operating weight: 2,700 kg Bucket capacity: 20, 40, 100 liters Engine model: YANMAR Engine power: 15 kW Number of cylinders: 3 Oil cooler: Yes Swing boom: Yes Extendable rubber tracks: Yes (1.3 m–1.5 m) Max. gradeability: 30% Pump type: Piston pump Hydraulic pressure: 20.6 MPa Hydraulic oil flow: 36 l/min Travel speed: 2.6 / 4.5 km/h Slew speed: 9.5 rpm Max. digging force: 19.5 kN Tank capacity: 26 l Itedpfxsw Ufwve Ahben DIMENSIONS: Overall width: 1,500 mm Overall height: 2,450 mm Overall length: 3,200 mm WORKING RANGE: Max. digging depth: 2,430 mm Max. dumping height: 2,610 mm Max. digging reach: 4,136 mm Max. ground reach: 4,100 mm Minimum swing radius: 750 mm 2-speed travel Heater Radio Fan PRICE: €21,000 net €24,990 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge stock of machines, with around 100 available at any given time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, Year of construction: 2024, The conveyor belt TYPE L is used to feed or remove products and waste of all kinds in vegetable processing and transportation. ProdMa configures the conveyor belt according to the customer's requirements! Iodpforckn Rjx Ahbstn The ALPHA 30 AA BLUE belt, equipped with guide rails and dividers, is ideal for transporting various foodstuffs and has been verified for the food industry.

Condition: excellent (used), For sale is a professional IVECO Magirus TS 8/8 fire pump, equipped with a powerful, gasoline engine, FIAT 156 A 2.000, with a power output of 32 kW. This robust unit is designed for intensive use – suitable for fire brigades, industrial plants, farms, technical services, municipal companies, and for pumping large volumes of water. The pump is conveniently started using an electric starter. It also has an emergency manual start option. An integrated control panel ensures easy operation. Pump Data: Manufacturer: IVECO Magirus AG Type: FP 8/8 / TS 8/8 Standard: DIN 14420 / DIN 14410 Year of manufacture: 1997 Serial number: 86385 PVR test number: 346/6/90 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Pump rated speed: 2820 rpm Gear ratio: 1:1 Weight of the ready-to-use pump: 189 kg Engine Data: Manufacturer: FIAT Auto S.p.A. Engine type: 156 A 2.000 Itodsz Spdhopfx Ahbsn Capacity: 999 cm³ Power: 32 kW at 5000 rpm Limited operating speed: 3500 rpm Fuel: unleaded 95 gasoline Start: electric starter Emergency manual start Battery included Equipment: automatic PRIMATIC suction system two pressure gauges work light integrated fuel tank control panel with indicators RPM adjustment pump clutch discharge valves sturdy transport frame with handles The pump is in very good condition and is solidly built. It shows normal, minor signs of wear consistent with its age. The condition and completeness of the unit are accurately depicted in the photos. This is a very powerful, professional pump with a flow rate of up to 800 liters per minute – ready for fire, industrial, and agricultural applications. Shipping on a pallet is possible.

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,500 kg, lifting height: 5,499 mm, tire size: 16x70-20, number of seats: 1, shovel volume: 1 m³, Year of construction: 2026, Equipment: additional headlights, adjustable boom, all wheel drive, hydraulics, onboard computer, standard shovel, The HZM 825-T Profi is the flagship model in the HZM telehandler series, offering maximum performance, maximum reach, and maximum reliability. Powered by the robust Yunnei diesel engine with 75 hp / 55 kW and Bosch common-rail high-pressure injection, it achieves a tipping load of 4,050 kg at the attachment point and a lifting height of 4,541 mm – figures that other telehandlers in its class cannot match. The operating weight of 5,500 kg ensures maximum stability, even with the telescopic arm fully extended and carrying the maximum load. As standard, the machine is equipped with a 1.0 m³ standard bucket with a Euro attachment and a hydraulic quick-change system for tool-free attachment changes from the driver's seat. With a lifting height of 4,541 mm, the HZM 825-T Profi reaches areas that are usually reserved for cranes or forklifts: truck loading ramps, building openings on the third floor, high warehouses, and agricultural silos. The powerful torque converter transmission with powershift function ensures powerful, smooth movements even under maximum load, and the electronically controlled reversing switch on the joystick enables quick changes in direction without having to move your hand. The fully equipped cabin offers a sprung comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a standard rearview camera. A complete LED lighting system with main and work headlights, as well as a rotating beacon, enables operation even in the early morning and during night shifts. Rear hydraulics and a 13-pin socket according to EU standards for trailers and electric tools are also included as standard. The machine is CE-certified according to EU Machinery Directive 2006/42/EC and complies with the EN 474 standard for earth-moving machinery. Each machine undergoes a complete quality and function test before delivery. The scope of delivery includes the COC document for straightforward road approval. For operation on public roads, a driver's license of class L (up to 25 km/h) is sufficient; no driver's license is required on private property. A 2-year manufacturer's warranty is included. Ijdoz Sr Tvepfx Ahbstn Technical data: Feature Value Engine Yunnei DEF20CAF4, Diesel, Bosch Common-Rail Engine power 55.8 kW / 75 hp Max. torque 320 Nm Drive type Torque converter with powershift, 2 forward gears Maximum speed 20 km/h Fuel tank 98 l Hydraulic tank 95 l Max. hydraulic pressure 180 bar Max. hydraulic flow rate 120 l/min Operating weight 5,500 kg Tipping load at the attachment (machine level) 4,050 kg Standard bucket 1.0 m³ Lifting height (telescopic arm, lower edge of bucket) 4,541 mm Turning radius inside / outside 1,892 mm / 4,043 mm Equipment / Highlights: Full cab with heating, ventilation, rearview camera; sprung comfort seat; adjustable steering wheel; LED main and work headlights; rotating beacon; windshield wiper/washer system; electronic Profi joystick for driving, telescopic function, and hydraulic circuit; Euro quick-change system with pressure relief; 3rd/4th hydraulic circuit with continuous pressure function; rear hydraulics with 13-pin socket; Powershift function (automatic neutral position when braking); floating position; hydraulic auxiliary oil cooler; lockable doors. Scope of delivery: HZM 825-T Profi including Euro attachment & 1.0 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT shown. Financing/Leasing: Available upon r

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// For sale: new submersible pump Wilo EMU KS15 – a professional device from the renowned German manufacturer Wilo. The pump is designed for operation in demanding conditions – ideal for dewatering, pumping stations, and industrial applications. The equipment is brand new, complete with documentation and accessories shown in the photos. Itodpfez Smq Dox Ahbjn ⚙️ Technical specifications: Manufacturer: Wilo (Germany) Model: EMU KS15 Power supply: 3~400V / 50 Hz Power: 1.30 kW Current: 3.15 A Degree of protection: IP68 (typical for submersible pumps) Max. delivery head: up to 12.5 m Connection: G2 / PN10 Catalogue number: 6019450 🛠️ Features: Submersible pump for clean and slightly contaminated water Robust industrial construction High performance and reliability Designed for continuous operation Compact and easy to install Set includes quick coupling / elbow and controller (start/stop function) 📦 Condition: 🆕 New – unused ✔️ Comes with original documentation ✔️ In stock and ready for dispatch 📦 Included in the set: Wilo EMU KS15 pump Power cable Control unit (switch) Connection / elbow fitting Operating manual 📌 Applications: Dewatering of excavations Construction Industry Agriculture Pumping stations