Jaw crusher

Metso Nordberg C 140

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, 🇬🇧Iveco T-Way 500 Equipment CIFA RY 1300 ADVANCE concrete mixer • Anti-wear protection for 25x8 mm propellers • Two manholes • Rolling rollers diam. 250 mm with balance support • Central reduction gear • Water tank, capacity 1200 | + 80 litre oil tank Hodev Apf Nspfx Adaoh • W a t e r • Quick water connection on both sides • Concrete consistency detection pressure gauge • Double electro-hydraulic controls (one push-button panel in the truck cabin and one rear, removable, with 3 m of cable) • Two additional chute sections, with fixing supports on the subframe • Four-start, edged propellers at the unloading point • Wear-resistant plates on the loading hopper and unloading chute • Unit completely sandblasted and protected with anti-rust primer • Water pump and chute lifting cylinder, hydraulically operated by the distributor • Heat exchanger • Approved folding rear underrun protection bar • Emergency Start/Stop buttons for the vehicle engine Optional • No. 2 additional chute sections > EKOS CAP - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Year of construction: 2012, condition: good (used), Complete dust drying line up to 6t/h including: - Drum Drayer Instalmec CT40 - Sawdust furnace 5MW with gas mixing chamber Hsdovu Dq Rjpfx Adaoh - Moving floor rawmaterial storage Rc9Tv - Disk screen for big particles - Intermediate bin 6m3 before drum - Rotating valve - Main Fan 160kW - Fuel storage and conveyor

Condition: good (used), functionality: fully functional, power: 239 kW (324.95 HP), overall weight: 50,500 kg, Year of construction: 2002, operating hours: 11,245 h, machine/vehicle number: CCC00513, 239 kW Hjdpfxslhqhmo Adaeh weight: 50,5 t engine complete overhauled tracks as new new cylinder-sealing

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Hodpjd E A I Isfx Adaoh Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Year of construction: 2025, functionality: fully functional, The AT-3000 is an advanced automatic pallet nailer designed for maximum efficiency and intuitive operation. It offers the flexibility to produce different types of pallets on a single machine by simply changing the template. Hodpfx Adewq Izweaoh

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. Hedovwlqqepfx Adash New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Hedpfxsua D Alj Adaeh Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Hodpfx Aeq I Rkdodajh Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW

Condition: reconditioned (used), Year of construction: 2007, - Primary impact crusher, Brand Laron Model IM 16 - Complete assembly, available as mobile or static unit. - New rotor bearings - New rotor blow bars - Front jaw (impact plate) in near-new condition - Production capacity: 800 t/h - Feed opening: 2320 x 1700 mm. Motor: 600 HP Hjdpfoimwg Hjx Adaoh - New bearings and supports - New rotor blow bars - Apron feeder: width 2000 mm, length 10,000 mm. Gearbox and 40 HP motor. Feeder condition: semi-new - Disc pre-screen: width 2000 mm, diameter 1000 mm. Gearbox and electric motor - Hopper with 40 m³ capacity. Bolted and sectional for easy transportation - The entire assembly is mounted on a chassis with tractor head coupling and can be transported on dolly axles. We also have secondary hammer mills, screens, and conveyor belts available to complete a plant.

Condition: ready for operation (used), Jaw Crusher Kleemann Brand: Kleemann Type: SSTR 1250 Hodju S Tqvopfx Adaoh Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons