Telehandler / Telescope Forklift

Merlo TF 33.7-115

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,277 h, Operating hours: 2,277, First registration: 24.05.2022 ___ Year of manufacture: 2022 Operating hours approx. 2,200 Max. lift capacity: 3,300 kg Max. lift height: 6,600 mm Max. reach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled Power: 85 kW (115 HP) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive pump: electronically controlled, variable flow Motor: variable displacement motor EPD TOP incl. with optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed, electro-hydraulically controlled Vmax = 1st/2nd gear = 16/20 km/h, optionally 40 km/h Cab: enclosed cab Split door 360 degree all-round visibility GRAMMER air suspension seat with lap belt ROPS/FOPS certified Heating Front, roof and rear windscreen wipers Sunblind 4x1 joystick, electronic, with capacitive release incl. travel direction switch Telescopic boom, 2-part, with electronic end position damping (Soft Stop) Quick-attach carrier system, type "ZM2", hydraulically controllable from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Drive: permanent all-wheel drive Axles: front axle fixed, rear axle oscillating Brake system: power-assisted disc brakes on all four drive wheels, automatically acting parking brake when engine off Hydraulic system: variable displacement pump, "LOAD SENSING" type Working hydraulics flow rate: 125 l/min Hydraulic fan flow rate: 46 l/min Total output: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12V Battery: 100 Ah Alternator: 120A Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Special equipment: Tires 400/70-24 158A8, Rear hydraulics connection with separate control, EU-registration as tractor/agricultural tractor, 40 km/h Drawbar coupling, height adjustable, self-locking, 30/32 mm pin, incl. trailer lighting connector Air conditioning, Boom suspension (B.S.S.), LED beacon on cab roof (approval at customer discretion), LED working lights on the cab (2 front, 2 rear) instead of standard halogen headlights, 2 working lights at the end of first boom section (main boom), ASCS upgrade: monitor with all ASCS functions + continuous flow in front. Location: 54595 Prüm Ijdpfeupq Tqex Abuoar

Year of construction: 1993, condition: good (used), Clamping carriage Braun WES fully hydraulic with auxiliary carriage with tracks Iedpefuh Dyjfx Abujar Track width: 79 cm good condition - immediately available Visit also my other advertisements. I am looking forward to your inquiry.

Condition: good (used), machine/vehicle number: 49889159610710, Year of construction: 2020, operating hours: 877 h, load capacity: 3,300 kg, lifting height: 6,000 mm, overall weight: 6,000 kg, enginetype: Diesel, manufacturer: Merlo Iaodpfx Aew Ry Tdobujr

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,997 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 6,550 kg, total length: 4,679 mm, drive type: Diesel, construction width: 1,990 mm, Rigid telehandler Load center: 600 Mast type: Telescopic Transmission: Torque converter Speed class: 30 Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres size: 380/75 R20 Front tyres condition: 80 - 100% Ijdpfox Nz Eajx Abujar Rear tyres type: Pneumatic Rear tyres size: 380/75 R20 Rear tyres condition: 80 - 100% 3rd valve,

Condition: new, functionality: fully functional, machine/vehicle number: FTH25N60LSNEU, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,280 mm, power: 42 kW (57.10 HP), fork length: 1,220 mm, empty load weight: 5,800 kg, total length: 3,550 mm, drive type: Diesel, construction width: 1,600 mm, Rigid telescopic handler Chassis number: FTH25N60LSNEU Load centre: 600 Fork width: 122 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: New unit Technical condition: New Front tyre type: Pneumatic Front tyre condition: New Ijdpfx Abex Tm Eteujar Rear tyre type: Pneumatic Rear tyre condition: New Rear work light, front work light, heating, full cab, CE certificate, safety light, interior mirror, exterior mirror, windscreen wiper, LED, seat,

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 8,850 mm, total length: 5,900 mm, · Kippwinkel 11 ° · Schüttwinkel 116 ° · Wenderadius (über Räder) 3.35 m Iedpfx Asxd Hckebusar · Heben 10.24 s · Senken 7.95 s · Teleskop ausfahren 9.89 s · Teleskop Einfahren 9.48 s · Ankippen 3.06 s · Auskippen 2.44 s · Motornorm Stage V · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 54.60 kW · Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm · Zugkraft 3860 daN · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. travel speed 24.90 km/h · Festellbremse Hydraulik · Pumpenart Zahnradpumpe · Hydraulikfördermenge / Hydraulikdruck 88 l/min / 245 bar · Motoröl 11 l · Hydrauliköl 115 l · Fassungsvermögen des Kraftstofftanks 90 l · Geräuschpegel im Fahrerstand (LpA) 74 dB · Umgebungsgeräusch (LwA) 103 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. Iaodpfx Aboudvt Rjuor The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.