Tipper truck

Mercedes Arocs

Condition: used, mileage: 496,262 km, power: 425 kW (577.84 HP), first registration: 07/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, parking heater, soot filter, Mercedes-Benz Arocs 2658 6x4 with Retarder * RETARDER * Leaf/air suspension * Euro 6 * Wheel arrangement 6x4 * Single-circuit tipping hydraulics * Differential lock * On-board computer * Refrigerator * Folding bed behind the seats * Air conditioning * Auxiliary heater * Cruise control * Lane keeping assist * Hill start assist * Multifunction steering wheel Itsdsy Tgrajpfx Ag Ieg * Radio with Bluetooth * 2 x air horns on the roof * 2 x rotating beacons * Roof hatch * Automatic transmission * Central locking with remote control Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Itsdpoh Hm Tzefx Ag Isg Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau

Condition: used, mileage: 206,000 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, overall weight: 20,500 kg, brakes: retarder, color: green, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * 1 Air conditioning system * 1 Navigation system * 1 Active Brake Assist 5 * 1 Hydraulic Auxiliary Drive (HAD) * 1 Electronic braking system with ABS and ASR * 1 Heater, electronic compressed air supply unit * 1 Electronic compressed air supply and control, medium * 1 Disc brake, on front and rear axles * 1 Parking brake, electronic * 1 Secondary water retarder * 1 Condensate monitoring, for compressed air system * 1 Frame overhang 1050 mm * 1 Steering system, single-circuit * 1 Stabilizer, front axle * 1 Power steering pump, unregulated * 1 Integral rear * 1 Smoker's package * 1 Compressed air connection, in the cab * 1 Hot water auxiliary heater, cab * 1 Socket 24 V/15 A, passenger footwell * 1 Trailer socket 24 V, 15-pin * 1 Mirror cover, construction vehicle * 1 Tinted windshield * 1 Front mirror, heated * 1 Locking system, with central locking * 1 Light sensor * 1 Rain sensor * 1 Predictive Powertrain Control * 1 Single-plate clutch * 1 Mercedes PowerShift 3 * 1 Digital tachograph, 2nd generation, ADR * 1 Axle load measuring device * 1 Multimedia cockpit, interactive * 1 Tank 390l+130l hydraulic oil * left, 650x700x1365 mm * Aluminum * 1 AdBlue tank 60 l, left * 1 Automatic high/low beam and cornering lights * 1 Fog lights, LED daytime running lights * 1 Stone guard, metal, for headlights * 1 Engine mount, reinforced * 1 High Performance Engine Brake Ijdpfsw Er Uksx Ag Iotg * 1 Cyclone pre-filter, for coarse dust * 1 Meiller pump, 9-piston, type 296 * 1 Transmission oil cooler * 1 Safety Package * 1 Driving Package * 1 Saddle hydraulic system, clutch, DN20 * 1 Tipping control, in the cab * 1 Saddle coupling height, H = 150 mm * 1 Electronic Stability Program (ESP) * 1 Lane Keeping Assist * 1 Distance Assist * 1 Attention Assist * 1 Traffic Sign Assist * 1 Cruise control * 1 Refrigerator, in drawer, under bed ---- Subject to prior sale and errors. The vehicle description serves only for general identification of the vehicle and does not constitute a guarantee in the legal sense. You will receive information about the exact scope of equipment from our sales staff. Please contact us.

Condition: used, mileage: 25,000 km, power: 390 kW (530.25 HP), first registration: 03/2025, fuel type: diesel, overall weight: 26,000 kg, color: white, gearing type: automatic, Equipment: soot filter, * 1 We also offer financing/leasing and rental options! * 1 LA1 9206 WHITE ALUMINUM METALLIC * 1 LA4 9040 DEEP BLACK * 1 LZ2 PLATFORM BODY, DUMP BODY * 1 LZ3 EXTERIOR MIRRORS, PAINTED * 1 LZ4 DECORATIVE GRILLE, PAINTED * 1 LZ5 CAB EXTERIOR COMPONENTS, PAINTED * 1 CHASSIS DESIGN * 1 V1B AROCS * 1 V1W STANDARD * 1 C1K WHEELBASE 3300 MM * 1 AXLE LOAD DISTRIBUTION * 1 W2F WEIGHT VARIANT 26.0 T (7.5/9.5/9.5) * 1 M3E ENGINE OM471, R6, 12.8 L, 390 KW (530 HP), 2600 NM * 1 M5D 3RD GENERATION ENGINE OM471 * 1 Z5E OM 471 * 1 M4X ENGINE DESIGN EURO VI, E * 1 M8B AIR INTAKE, BEHIND CAB, MOUNTED * 1 M7T WATER PUMP, REGULATED * 1 M7I INSECT SCREEN, IN FRONT OF RADIATOR * 1 M5V HIGH PERFORMANCE ENGINE BRAKE * 1 M6L AIR COMPRESSOR, 2 CYLINDERS * 1 CLUTCH & TRANSMISSION * 1 G5B TWO-PLATE CLUTCH * 1 G2F TRANSMISSION G 330-12/11.63-0.77 * 1 N6Z TRANSMISSION OIL COOLER * 1 G0B DRIVE TRAIN, 44 T TO 80 T * 1 G0R TRANSMISSION MOUNT, OPTIMIZED FOR INSTALLATION * 1 G5G MERCEDES POWERSHIFT 3 * 1 G5L POWERSHIFT ADVANCED * 1 G0W DRIVING PROGRAM OFFROAD * 1 N2E NEW MB 131-2C, PUMP * 1 Z5M AUXILIARY DRIVE, SINGLE * 1 Z5S AUXILIARY DRIVE PUMP, BELOW FRAME UPPER EDGE * 1 N8K MEILLER PUMP, 7-PISTON, TYPE 275 * 1 AXLES & SUSPENSION * 1 A1X FRONT AXLE STRAIGHT, INCREASED GROUND CLEARANCE * 1 A1C FRONT AXLE 7.5 T * 1 A2G REAR AXLE, CROWN WHEEL 300, PLANETARY, 13.4 T * 1 A5W AXLE RATIO I = 4.143 * 1 Q1S FRONT SPRING 7.5 T, 2-LEAF * 1 Q2Q REAR SPRING, 2 X 10.0 T, HARD * 1 C6Q STABILIZER, FRONT AXLE * 1 WHEELS & TIRES * 1 R5E ALUMINUM WHEELS 11.75 X 22.5, FA, DURA-BRIGHT, ALCOA * 1 R2Y ALUMINUM WHEELS 9.00 X 22.5, DURA-BRIGHT, ALCOA * 1 R0L TIRE, CUSTOMER REQUEST FA * 1 R0N TIRE, CUSTOMER REQUEST RA * 1 R0O TIRE, CUSTOMER REQUEST 2ND RA/DNA * 1 R0Z WHEEL NUT COVER * 1 S1Y TIRE PRESSURE MONITOR * 1 A1 W48KQA 75 2 X 385/65 R 22.5 TL ON/OFF STEERING Itsdpfxjwflwfe Ag Iog * 1 A2 F18K29 75 4 X 315/80 R 22.5 TL ON/OFF DRIVE * 1 A3 F18K29 75 4 X 315/80 R 22.5 TL ON/OFF DRIVE * 1 FRAME & FRAME COMPONENTS * 1 C5J MOUNTING PARTS, FOR DUMP BODY * 1 C5P FRAME SCREWED * 1 C0B FRAME OVERHANG 800 MM * 1 C6C STEERING, SINGLE-CIRCUIT * 1 C6I STEERING ASSIST PUMP, REGULATED * 1 C7K BATTERY CARRIER, BATTERIES STACKED * 1 K0T MAIN TANK, LEFT * 1 K1C TANK 290 L, LEFT, 650 X 565 X 950 MM, ALUMINUM * 1 K3V ADBLUE TANK 60 L, LEFT * 1 K5M TANKS, LOCKABLE * 1 K5R PROTECTIVE PLATE, FOR TANK * 1 K5S PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * 1 Z4O TANK CROSS SECTION, NARROW * 1 Z4Q TANK CROSS SECTION, LOW * 1 K7D EXHAUST SYSTEM, TAILPIPE TO RIGHT OUTSIDE * 1 U2G EXHAUST BOX * 1 C8A ALUMINUM FENDER, AT REAR AXLE * 1 F7B BUMPER, CORNERS MADE OF STEEL * 1 F7B BUMPER, CORNERS MADE OF STEEL * 1 F7B BUMPER, CORNERS MADE OF STEEL * 1 C5U ROAD SURFACING PREPARATION * 1 C7C REAR-UPS, FOLDABLE, STEEL DUMP BODY, PROOF FORCE 80% * 1 Q7W CENTER AXLE TRAILER COUPLING, D50, ROCKINGER * 1 Q7W CENTER AXLE TRAILER COUPLING, D50, ROCKINGER * 1 Q8R REAR CROSS MEMBER, REINFORCED * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 B2A DISC BRAKE, ON FA AND RA * 1 CAB EXTERIOR * 1 F1B M-CAB CLASSICSPACE, 2.30 M, TUNNEL 170 MM * 1 F1Q M-CAB * 1 F2B FLOOR VERSION, TUNNEL

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Itedpfx Agehlz R So Isg Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, mileage: 23,000 km, power: 375 kW (509.86 HP), first registration: 01/2025, fuel type: diesel, overall weight: 18,000 kg, color: orange, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * 1 NAVIGATION SYSTEM * 1 AIR CONDITIONING SYSTEM * 1 We also offer financing/leasing and rental options! * 1 LA1 2603 TIE ROD * 1 LA2 2603 TIE ROD * 1 LZ2 ORNAMENTAL GRILLE, PAINTED * 1 -----CHASSIS DESIGN----- 1 V1B AROCS * 1 V1W STANDARD * 1 C2R WHEELBASE 4800 MM * 1 -----AXLE LOAD DISTRIBUTION----- 1 W2X WEIGHT VARIANT 26.0 T (8.0/11.5/7.5) * 1 M3D ENGINE OM471, R6, 12.8 L, 375 KW (510 HP), 2500 NM * 1 3RD GENERATION ENGINE OM471 * 1 ENGINE DESIGN EURO VI, E * 1 AIR INTAKE, CABIN SIDE WALL, MOUNTED * 1 WATER PUMP, REGULATED * 1 INSECT SCREEN, IN FRONT OF RADIATOR Itodpfsv Sxfksx Ag Ieg * 1 HIGH PERFORMANCE ENGINE BRAKE * 1 AIR COMPRESSOR, 2 CYLINDERS * 1 -----CLUTCH & TRANSMISSION----- 1 SINGLE-PLATE CLUTCH * 1 TRANSMISSION OIL COOLER * 1 TRANSMISSION MOUNT, DESIGNED FOR EASY REPAIR * 1 MERCEDES POWERSHIFT 3 * 1 POWERSHIFT ADVANCED * 1 DRIVING PROGRAM OFFROAD * 1 AUXILIARY DRIVE, SINGLE * 1 AUXILIARY DRIVE PUMP, UNDER FRAME UPPER EDGE * 1 -----AXLES & SUSPENSION----- 1 FRONT AXLE, STRAIGHT DESIGN * 1 FRONT AXLE 8.0 T * 1 REAR AXLE, BULL GEAR 485, HYPOID, 13.0 T * 1 TRAILING AXLE, 7.5 T, STEERABLE, RELIEVABLE, LIFTABLE * 1 AXLE RATIO I = 2.929 * 1 FRONT SPRING 8.0 T, 3-LEAF * 1 FRAME LOWERING, WITHOUT BAG-REST PRESSURE CONTROL * 1 STABILIZER BAR, FRONT AXLE * 1 ADDITIONAL STABILIZER BAR, REAR/TRAILING AXLE * 1 AXLE LOAD MEASURING DEVICE * 1 PROTECTIVE PLATE FOR HAD HIGH-PRESSURE LINES * 1 HYDRAULIC AUXILIARY DRIVE (HAD) * 1 -----WHEELS & TIRES----- 1 STEP SHOULDER RIMS 11.75 X 22.5, FRONT AXLE * 1 STEP SHOULDER RIMS 9.00 X 22.5 * 1 STEP SHOULDER RIMS 11.75 X 22.5, REAR AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, FRONT AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, FRONT/TRAILING AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, REAR AXLE * 1 WHEEL NUT COVER * 1 TIRE PRESSURE MONITORING * 1 W48KHA 90 2 X 385/65 R 22.5 TL REGIO RR STEERING ?K? * 1 F18LIA 90 4 X 315/80 R 22.5 TL REGIO RR DRIVE ?L? * 1 W48KHA 90 2 X 385/65 R 22.5 TL REGIO RR STEERING ?K? * 1 -----FRAME & FRAME COMPONENTS----- 1 FRAME, SCREWED * 1 OMISSION OF MOUNTING PARTS, ON THE FRAME * 1 FRAME OVERHANG 1350 MM * 1 STEERING, SINGLE CIRCUIT * 1 STEERING ASSIST PUMP, REGULATED * 1 BATTERY CARRIER, BATTERIES SIDE BY SIDE * 1 MAIN TANK, LEFT * 1 TANK 510 L, LEFT, 650 X 700 X 1300 MM, ALUMINUM * 1 ADBLUE TANK 60 L, LEFT * 1 TANKS, LOCKABLE * 1 PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * 1 TANK CROSS-SECTION, NARROW * 1 TANK CROSS-SECTION, HIGH * 1 EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE * 1 EXHAUST BOX * 1 FENDER, FOR CHASSIS TRANSFER * 1 SPLASH GUARD (EC), FRONT * 1 FRONT UNDER RUN PROTECTION (ECE), ALUMINUM * 1 BUMPER, CORNERS MADE OF STEEL * 1 BUMPER, CENTER SECTION WITH TOWING EYE, COUPLING HEAD * 1 TRAILER COUPLING STANDARD, D40, ROCKINGER * 1 HAND LEVER, BELOW, FOR TRAILER COUPLING * 1 REAR CROSSMEMBER, REINFORCED * 1 DISC BRAKE, ON FRONT AND REAR AXLE * 1 ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * 1 HEATING, ELECTRONIC COMPRESSED AIR SUPPLY UNIT * 1 ELEC. COMPRESSED AIR SUPPLY & CONTROL, CENTER * 1 CONDENSATE MONITORING, FOR COMPRESSED AIR SYSTEM * 1 COMPRESSED AIR TANK, STEEL * 1 TRAILER BRAKE, 2-LINE, BRAKE CONNECTIONS LEFT * 1 TRAILER STABILITY CONTROL ASSISTANT (TSA) * 1 TRAILER BRAKE CONNECTION REAR, DUO-MATIC+STANDARD * 1 PARKING BRAKE, ELECTRONIC * 1 SECONDARY OIL RETARDER * 1 -----CAB EXTERIOR----- 1 L-CAB STREAMSPACE, 2.30 M, TUNNEL 170 MM * 1 FLOOR VERSION, TUNNEL 170 MM, FOR STORAGE COMPARTMENT LEFT * 1 CAB WIDTH 2.30 M * 1 CAB, 600 MM MOUNTING HEIGHT * 1 STREAMSP

Condition: used, mileage: 17,200 km, power: 200 kW (271.92 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,699 mm, loading space length: 5,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Flatbed truck & tarpaulin cover, ex-Bundeswehr (German Armed Forces) vehicle, equipped for driving school use ABS ASR ESP Rear axle differential lock Front axle differential lock 8-speed Mercedes Power Shift automatic transmission 290-liter fuel tank on the left Fog lights LED daytime running lights 2 toolboxes mounted on the left and right Reinforced front axle stabilizer Reinforced rear axle stabilizer Heavy-duty steering Additional transmission oil cooler Programmable special module Spare wheel holder on the right side with spare wheel mse 2 cable system AHK Ringfeder D 40 tow hitch Total weight with continuous braking system: 27,000 kg AH load for a drawbar trailer: 18,000 kg, vertical load: 1,000 kg Foldable underrun protection at the rear Fire extinguisher box at the rear right Driving school equipment: Veigel pedal system with examination mode switch Additional monitor for the passenger Light bar with long-range spotlights Classic Space cab Driver's seat, air-suspended comfort seat, Isringhausen Middle seat Passenger's seat, air-suspended comfort seat, Isringhausen Air conditioning system Hot water auxiliary heater Cab rear wall without window Multi-function steering wheel Adjustable steering wheel Radio Emergency stop switch Cruise control Electric windows (2) Adjustable and heated rearview mirrors Roof ventilation flap External sun visor Drum brakes Front axle, leaf-sprung Rear axle, leaf-sprung Front axle capacity: 7.5 tons Rear axle capacity: 11.5 tons Engine: OM 936, 7.7L, 6-cylinder Wheelbase: 4200 mm Gross Vehicle Weight (GVW): 18,000 kg Net Vehicle Weight: 8,550 kg Tires: 315/70R22.5, 80% tread Vehicle registration number for inquiries: 2457. Vehicle in very good overall condition, first owner, well-maintained. No liability for typographical and data transmission errors. Subject to errors and prior sale. Daily cash purchase of vehicles, construction machines, trailers, and semi-trailers manufactured between 2000 and 2026. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery possible. Itodpfjy Tgifox Ag Ieg

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload weight: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis number: YAMT14XX4N0107629 Year: New and unused (2023) Weights/Loading Capacity: King-pin load: 23,000 kg Axle load: 12,000 kg (per axle) Total axle load: 48,000 kg Gross vehicle weight (GVW): 71,000 kg Empty weight: 16,535 kg Payload: 54,465 kg Axles: - Axle brand: BPW - Hydraulic steering - Pneumatic suspension with raising/lowering valve - WABCO braking system - Tyres: 245/70 R17.5 Michelins (Load index 146/146 F) - 1st axle liftable Dimensions: Loading length: 9,300 mm Extensions: 6,500 + 6,800 mm Loading floor width: 2,540 mm Loading height: 900 mm Additional Equipment: - Double extendable loading platform - Container locks - Width outriggers + timber infills for width extension - Lashing rings - Double folding ramp set Itsdpfeuu Hcfex Ag Isg - Central lubrication - 1x spare wheel + holder - JOST landing gear - 24V electrical system - 2.0" king-pin - One galvanized steel headboard - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information: Year of manufacture: 2023 Axle Configuration: Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; Steerable; Axle brand: BPW; Tyre tread depth (left inside/outside, right inside/outside): 100% each Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Weights: Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functional: Loading height: 900 mm (manufacturer’s specification; previously given as 65535 cm is a clear data error) Extendable body: Yes Condition: General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information: Price: On request Further Information: Please contact Stefan Schaapveld for further details.

Condition: used, mileage: 251,868 km, power: 290 kW (394.29 HP), first registration: 04/2016, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2028, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, Internal vehicle number: G400165 Available immediately at our yard in Kaufungen - Kassel. For more information, please contact: Itjdpfey Tf Srex Ag Ieg * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 184,291 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Internal vehicle number: G400082 Financing example: * Internal number: G400082 Isdey Tf Sxopfx Ag Ietg * Purchase price: 69,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 1,090.02 € Residual value: 12,380.00 € If this offer is of interest to you or if you would like to customize it to meet your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm -Rear gooseneck with bevel approx. 1,000 mm x 10° Loading area: -Loading area in extendable design, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° -One recess protruding into the loading surface and into the chamfer to accommodate the excavator dipper arm -Pneumatic locking with conical locking pins and reinforced locking positions -Hardwood covering on the bevel of the loading area Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Ramps with hardwood decking -Hydraulically folding ramp tips -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -Square climbing ledges 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and suspension: -BPW axles and suspension, 1st axle with preload steering, all other axles with forced hydromechanical steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -235/75 R 17.5 twin tires -TPMS tire monitoring system in accordance with ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheels Accessories included: -steel front wall, pluggable, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Parking position on the gooseneck for the warning signs when not in use -1 Spare wheel -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -One plug-in ALU rear panel on the gooseneck, approx. 400 mm high, anodized -Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin -2" kingpin Isdpfx Agsk Aht Us Ietg -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -4 wheel chocks -Mechanical seat posts with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -1 Intermediate table, approx. 300 mm wide -Widenings (galvanized) extendable by approx. 230 mm per side -Wheel recesses with square climbing rails -ALU covers for the wheel recesses -1 pair of mechanical rear supports -Steering can be operated from the front and rear by cable remote control, with tracking control of the axles -1st axle with automatic lift axle function -Central lubrication system with 1 pump, BEKAMAX brand -Radio remote control for operating the self-steering, in addition to the cable remote control, with 2 indicator lights on the receiver as toe-in control -Wabco Smart Board System -4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Condition: used, mileage: 137,802 km, power: 338 kW (459.55 HP), first registration: 03/2021, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, crane, Internal vehicle number: G300332 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More information: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 460 hp Leaf spring, air suspension 8x4 Unladen weight 15,050 kg Roll-off tipper PALFINGER P20TSLD3 Itsdpfx Asxhaqcog Iog For containers from 4,250 to 6,630 mm Remote control Year of manufacture 2021 Crane PALFINGER PK19.001 SLDB5 Up to 10.2 m Max. 6 tons 3rd control circuit for grab Remote control Year of manufacture 2021 Financing example: * Internal number: G300332 * Purchase price: 164,900.00 € * Down payment: 10% * Term: 60 * Monthly rate: 2,502.00 € Residual value: 30,780.00 € If this offer is of interest to you, or if you would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 112,830 km, power: 310 kW (421.48 HP), first registration: 04/2016, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, Internal vehicle number: G400081 German vehicle Available immediately at our yard in Kaufungen - Kassel More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Itsdey Dyxhjpfx Ag Ieg Financing example: * Internal number: G400027 * Purchase price: 49,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 740.87 € Residual value: 10,380.00 € If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We would be happy to accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC COMMERCIAL VEHICLES GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Neck: - Gooseneck in SNT design to optimize load platform length, approx. length 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical kingpin load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines run protected inside the extendable beams and adjust automatically to the respective bed length - 5 pairs of fold-out lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for fitting bolted RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate surface, and continuous prism-shaped digger recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of laying lashing rings in the recess LC 16,000 daN - 1 pair of laying lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE system, all axles forced-steered hydro-mechanically - Hose break valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Axles finished with 2 layers of 2K paint, single-color painted in FAY-Grey-34-0260 - Technical axle load: 12,000 kg per axle, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – Brand at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Itsdpfx Aexbmn Ujg Iog Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure automatically shot-blasted after welding with a blast wheel system - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red per RAL system 841GL Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear via cable control with push buttons, including axle tracking control (without installation in tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on the outer beams; includes 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - Rear galvanized plug-in stakes are removable

Condition: used, mileage: 137,802 km, power: 338 kW (459.55 HP), first registration: 03/2021, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, crane, Internal vehicle number: G300332 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More information: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 460 hp Leaf spring air suspension 8x4 Unladen weight 15,050 kg Roll-off tipper PALFINGER P20TSLD3 For containers from 4,250 to 6,630 mm Radio remote control Year of manufacture: 2021 Crane PALFINGER PK19.001 SLDB5 Up to 10.2 m Max. 6 tons 3rd control circuit for grabber Isdpfxjxhap Se Ag Ietg Radio remote control Year of manufacture: 2021 Financing example: * Internal number: G300332 * Purchase price: 164,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 2,502.00 € Residual value: 30,780.00 € If this offer appeals to you or you would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.