Concrete pump

Mercedes-Benz Arocs 3340 Concrete Pump 38 Mtr.

Condition: new, Mobile sheds are intended to increase the logistical and production capacity of any company, create new covered spaces to be used for logistical solutions such as permanent or temporary storage of goods, creation of new production or service areas, covering loading/unloading areas, vehicle and machinery storage, in all areas of business application. Gtedpfst Ef T Dox Agbot

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure Gtjdepl Avdspfx Agbet - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts. Gtodpfoirtdpox Agbst

Condition: like new (used), power: 242 kW (329.03 HP), fuel type: diesel, overall weight: 24,300 kg, Equipment: Rearview camera / GPS compass Total drilling depth: 252,155 m Borehole navigation system: HNS without base station Hydraulic drifter COP 3060 CR / COPROD 76 (90-105 mm): Impact power: 30 kW / Impact frequency: 50 Hz / Torque: max. 2,450 Nm. Atlas Copco compressor C146-07: Delivery rate: 233 l/s (13.4 m³/min) Pressure: 12.0 bar Water mist system: with 400 L tank Stabilization: Rear hydraulic cylinders Hammer hours: 2,641 h Dust extraction unit DCT: Hydraulically driven Gedpfjxqpv Hox Agbott Drill feed: Aluminum with chain feed and double hose reel Progressive RCS drilling system including collaring automation: Anti-jamming automation, automatic flushing air monitoring Engine CAT C9.3 Tier 4 final: 242 kW Feed: Automatic positioning / Automatic addition and retrieval of drill rods Rod changer magazine RHS: Automatic, 8 rods, each 4.5 m

Condition: good (used), Complete AMMANN asphalt mixing plant. The ERMIIS automation was installed in 2013, replacing the original AMMANN automation. Capacity: 160 tons/hour. The plant is operational until January 2026. Gtodpfjxqpvtsx Agbet

Condition: new, Year of construction: 2025, functionality: fully functional, Hall construction using modular building methods in any desired dimensions for flexible space utilization. Depending on your needs, the halls can be future-proofed at any time by being expanded, downsized, or having their layout modified. With clear spans of up to 100 m without intermediate supports, we offer you the optimal solution for your building requirements. Gsdpexqzhnefx Agbett As a DEUTSCHE INDUSTRIEBAU customer, you benefit from over 45 years of experience, high-quality materials, and intelligent design concepts. Visit our showroom with 150,000 m² of display area on the B1 in 59590 Geseke, in the heart of Westphalia. We are your reliable partner for innovative hall construction.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024. Gedpfxsv I E Tgs Agbott

Condition: new, functionality: fully functional, power: 34.57 kW (47.00 HP), gearing type: automatic, fuel type: diesel, color: original, overall weight: 3,400 kg, maximum load weight: 1,000 kg, lifting power: 1,000 kg/m, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 1 m³, digging bucket width: 360 mm, brakes: other, suspension: other, Year of construction: 2025, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW YANMAR COMBI EXCAVATOR!! NEW!! NEU!! NEW!! 1-YEAR WARRANTY PRICE: 32,000 EUR NET + VAT IN CROATIA. OUTSIDE CROATIA, VAT IS NOT APPLICABLE!! ENGINE: ORIGINAL Yanmar, 47 HP 1-YEAR WARRANTY WEIGHT: 3,400 kg WIDTH: 1.79 m LENGTH: 6.00 m HEIGHT: 2.60 m WORKING REAR HYDRAULIC DIGGING ARM: 3.90 m DIGGING BUCKET: 36 cm VARIOUS SIZES, HAMMER, ETC., AVAILABLE ADDITIONAL EQUIPMENT: FRONT LOADING BASKET WITH QUICK COUPLER, 1.00 m² Godow Tkmyopfx Agbstt PALLET FORKS WITH QUICK COUPLER ALSO AVAILABLE! INQUIRIES BY INVITATION ONLY: PLEASE SERIOUS INQUIRIES ONLY. NO EXCHANGES, NO BARTER, NO OTHER OFFERS ACCEPTED. FINANCING OR LEASING OFFER POSSIBLE THROUGH BANK ALSO AVAILABLE: LARGER KUBOTA FOR €22,000

Condition: used, functionality: fully functional, The Layher AR O-ledger 1.09 m forms the horizontal connection between the vertical standards of a Layher Allround scaffold. The ledger carries the deck sections and provides stability and strength to the structure. Thanks to the rosette connection, assembly is quick and secure: just one hammer blow and the ledger is firmly locked in place. The length of 1.09 meters makes this variant especially suitable for narrow façades, stair towers, and refurbishment scaffolds where longer ledgers do not fit. These pre-owned ledgers have been technically inspected and are fully operational. They may show minor signs of use or discoloration but are otherwise in good condition—a durable and cost-effective choice for both professionals and rental companies. Applications Gtjdpfxjw Ei R Aj Agbet - Refurbishment and façade scaffolds - Indoor scaffolds or stair towers - Scaffolding structures with limited space - Combination with Layher Allround standards and deck sections

Condition: new, Mobile warehouse Gjdpjxzrtpsfx Agbjtt customized quotation