Cattle truck

MERCEDES-BENZ ACTROS 1832 TT-XL 7 Pferde 6 Sitze Neufahrzeug

Condition: excellent (used), Year of construction: 2022,

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Nwsdpjpu R Ncsfx Af Sjl Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. Nwedpfx Afjmhhypj Sjl The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, power: 232 kW (315.43 HP), gearing type: mechanical, fuel type: diesel, fuel tank capacity: 313 l, emission class: euro3, Year of construction: 2016, operating hours: 18,000 h, Country of origin: Belgium Displacement: 9,300cc Dimension: 8,763 x 2,998 x 3,556 Bucket size: 4.2 Cubic Meter Nwjdey Tygqjpfx Af Sjl = More information = Number of cylinders: 6 Empty weight: 23.200 kg Engine type: Caterpillar C9.3 ACERT Bucket volume: 4.2 m^3

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side Nodpeh Ek Daofx Af Sswl - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: used, Year of construction: 1994, operating hours: 8,972 h, 1994 | Dresser TD 15 E Without Ripper | Used Tracked Dozer | 8972 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 53 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the bulldozer. Both lift cylinders have leaks and shocks on the rods. Absence of a left diagonal reinforcement bar from the front blade frame – the bar has been repaired by welding. Slight spray of oil and smoke when opening the oil tank cap. No visibility on the hydraulic oil level. The left rear window has been replaced with plexiglass and the front windshield as well as the side windows are cracked. No retention of the door in the open position. Absence of the diesel tank cap. The engine is stopped by pulling a cable. The parking brake control has been replaced by a bolt. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40009 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Nsdpfx Asx Rhbwef Sowl ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Nwodpoxzqulofx Af Sol Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Nsdpfonkapyox Af Sewl Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Nwodofz I Uispfx Af Ssl Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: used, Year of construction: 2020, operating hours: 10,600 h, Equipment: all wheel drive, WHEEL LOADER CATERPILLAR 972 XE Year of construction 2020 10600 BS , Engine with approx. 253 kW, Nedpfx Afou Sgd So Sewl carriage, air conditioning very good, like new condition Net plus 19% VAT