Three-sided tipper truck

MERCEDES-BENZ 3346 6X6 Blatt / Blatt Meiller

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length Cgsdskvnggspfx Akcot 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp Cjdjywtwwspfx Akcegt High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D Cgsdpfx Akewzyn Rocet 48-tool changer, Capto C8 tools chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Codpfjym Nfzex Akcegt Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Cjdpfx Akexyh Hvscjgt Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: excellent (used), Year of construction: 1994, Technical Data: Cjdpfx Asyurwvokcsgt - 2 hydraulically adjustable rolls - 3 driven rolls - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Very good condition Accessories: Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.

Condition: good (used), Technical details: Capacity: 3000 x 10 mm Cjdpfx Ajyngctekcogt Further technical specifications to follow. Accessories: Various tools Condition: Overall in good and fully functional condition. The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, mileage: 5 km, power: 14.7 kW (19.99 HP), gearing type: automatic, fuel type: diesel, color: blue, overall weight: 1,520 kg, operation weight: 1,520 kg, number of seats: 1, shovel volume: 0.025 m³, digging bucket width: 380 mm, Year of construction: 2021, operating hours: 7 h, Equipment: additional headlights, all wheel drive, cabin, hydraulics, rubber tracks, standard shovel, Gekko Network KG in Gersthofen – Your supplier for vehicles of all kinds. You can reach us by phone at 0821/453 467 70, via email, or in person at Wernher-von-Braun-Str. 2, 86368 Gersthofen. New Kingway CX15 B Mini Excavator with Perkins engine, joystick controls on the seat, rain and sun canopy, side boom operation, including 3 buckets! Manufacturer: Perkins; Model: CX15 CP with cab and articulated boom including Perkins engine; Year of manufacture: 2021; Weight: 1,520 kg; Engine power: 14.7 kW; Operating hours: 7 h Technical specifications: Model: CX 15B, Power (HP): 19 HP, Fuel: Diesel, Track width (mm): 950 mm, Digging depth (mm): 1,950 mm, Total machine weight (kg): 1,580 kg, Hydraulic connections for: breaker, auger, ripper tooth, log grapple, rake. Includes: 3 buckets (300/500/800 mm). Basic information Bucket capacity: 0.025 m³ Bucket width: 380 mm Boom length: 1,560 mm Stick length: 793 mm Hydraulic oil tank capacity: 13 l Hydraulic system Hydraulic pump model: DHP0010 Max. oil pressure: 17 MPa Hydraulic pump flow rate: 28.5 l/min Performance Rotation speed: 10 rpm Gradeability: 25% Bucket breakout force: 9.6 kN Boom force: 8.5 kN Engine Type: PERKINS Rated power: 14.7 kW at 2,200 rpm Max. torque: 51.8 Nm Number of cylinders: 3 Cooling: Air Working range Max. digging radius: 3,225 mm Max. digging depth: 1,650 mm Max. digging height: 2,740 mm Max. dumping height: 1,970 mm Max. raised dozer blade height: 170 mm Max. lowered dozer blade depth: 220 mm Boom swing angle: 50° left / 70° right Dimensions Track length: 1,290 mm Ground clearance: 405 mm Counterweight swing radius: 850 mm Track width: 180 mm Track height: 320 mm Height (without/with canopy): 1,570/2,200 mm Included tools / accessories 3 buckets Workshop toolkit Other information Joystick controls Ideal for construction, electrical, plumbing, repair, and service companies in related fields Minimal space requirement due to additional swing arm Cgodjklwvcjpfx Akcjt Manufactured based on and within European engineering standards, suitable for many conditions. Please note that some vehicles from our portfolio may be stored externally and not immediately available for on-site inspection. Please always contact us in advance at 0821/453 467 70. Our complete range is available on request. Price excluding VAT – VAT deductible

Condition: new, power: 45 kW (61.18 HP), fuel type: diesel, Year of construction: 2024, operating hours: 18 h, Empty weight: 2.840 kg Cgedpfoyunndjx Akcet Chassis type: rigid Steering: skid steer Lifting capacity: 3.700 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2007, faceplate diameter 2500 mm max. swing diameter over bed 2700 mm turning height 2500 mm Control Siemens 840D CNC workpiece weight max. 30 t workpiece dia. 2500 mm Crossbar travel distance every 100 mm 1200 mm Piston rod 1500 mm ram diameter 250 x 250 mm traversing speed 8 m/min Max. vertical feed rate 6000 mm/min Max. cross feed 8000 mm/min Speed of the machine table 180 U/min tool changing time 1 min cutting speed 140 m/min Cutting depth 14 mm Codpfxoy Dvlws Akcjgt Power Capacity of main drive 100 kW weight of the machine ca. 47 t dimensions of the machine ca. 12,5 x 8,0 x 6,7 m Features/Accessories: - Crossbars every 100 mm, including locking mechanism - 2 ram units with a cross-section of 250 x 250 mm; travel distance 1500 mm - Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection - ZF gearbox for main drive: AC 100 kW / S1 Siemens, speed 0–180 rpm - 2 tool changers, each with 16 stations - Max. tool weight 50 kg; max. 800 kg in the tool changer - 2 Renishaw touch probes with zero-point touch - Renishaw touch probe for workpiece measurement