Telehandler / Telescope Forklift

Manitou MT625

Condition: new, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 6,000 mm, total length: 5,090 mm, Kapazität Ausbrechkraft mit Schaufel 3770 daN Gewicht und Reifengröße Aufwärtsneigewinkel 12 ° Abwärtsneigewinkel 117 ° Wenderadius (über Räder) 3.31 m Bereifung Aufblasbar Reifenmodelle CAMSO SKS532 12-16.5 Hodey Abf Tjpfx Aitenu Leistung Heben 11.10 s Senken 8 s Teleskop ausfahren 7.70 s Teleskop Einfahren 7.40 s Ankippen 4.45 s Auskippen 4.30 s Motor Max. Drehmoment 200 Nm Zugkraft 2090 daN Motor/Batterie Nennleistung des Elektromotors 40 kW Hydraulische-Motorleistung 30 kW Batterietechnologie Lithium-ion Batteriekapazität 348 Ah Batterieenergie 35 kWh Ladegerät Leistung / Phase / Stromtyp 3 kW / Single-phase / AC Elektrischer Schaltkreis Batterie / Batteriekapazität 100 V / 348 Ah 12V Batteriekapazität 74 Ah Getriebe Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 1 / 1 Max. Fahrgeschwindigkeit 20 km/h Parkbremse Hydraulische Federentriegelung SAHR Festellbremse Hydraulisch Hydraulisch Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 84 l/min-235 bar Tankkapazität Hydrauliköl 80 l Lärm und Vibrationen Geräuschpegel im Fahrerstand (LpA) 72 dB Umgebungsgeräusch (LwA) 92 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Sonstiges Lenkräder (vorne / hinten) 2 / 2 Antriebsräder (vorne / hinten) 2 / 2

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Hnsdsxmd Uvepfx Aiteu Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: used, fuel type: diesel, color: red, lifting height: 5,850 mm, Equipment: air conditioning, General information Year of construction: 2022 Operating hours: 2.426 Drivetrain AdBlue system: Yes Engine type: Kubota Kubota V3307-CR-T-EW02 Measures Dimensions (LxBxH): 389 x 181 x 192 cm Weights Empty weight: 4.800 kg Hnsdpfx Aiez N Hl Ujtou Carrying capacity: 2.500 kg GVW: 7.300 kg Functional Working height: 600 cm Other information Availability: in stock Boom radius: 3.4 m

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,094 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB Hnodpfjz Eb Twex Aitju ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department Hedpfx Aom Twnloitonu

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,132 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift, rigid mast Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: SKS 1216.5 12PR Front tire condition: 60 - 80% Rear tire type: Pneumatic Hjdpfx Asz E T Uaoitenu Rear tire size: SKS 1216.5 12PR Rear tire condition: 60 - 80% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2023 Battery condition: 60 - 80% Rear work light, front work light, heater, dust filter, full cabin, CE certificate, LED, seat.

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse Hedsztgl Depfx Aitenu ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: very good Hodpjv Ntfyofx Aitsnu Front tires type: pneumatic Front tires size: 12-16.5 Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires size: 12-16.5 Rear tires condition: 80 - 100% Battery voltage: 12V Image serves as a symbol - Fork carrier - Interior rear view mirror - Radio antenna - Radio preparation - Info additional hydraulic function - JSM tilt function switch-off - Sun visor front roof window - Rear view mirror at the rear of the machine - Roof window wiper - Power cable 95mm - Engine heating - Diesel preheater - EU version - Easy Link STD module 3rd valve, rear work light, front work light, soot filter, full cabin, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 977 h, load capacity: 2,526 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Rigid telescopic handler Hjdpfx Ajwlxh Rsitjnu Speed class: 25 Technical condition: good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Manitou MT 625 is a versatile telescopic loader for construction sites, agriculture, and lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for working on uneven terrain and in confined spaces. Narrow design for tight access routes and halls. High maneuverability and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,077 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic handler, rigid frame Hnjdpfx Aiowlxh Dstsu Speed class: 25 Technical condition: good Description: The Manitou MT 625 is a versatile telescopic handler for construction sites, agriculture, as well as lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for work on uneven terrain and in confined spaces. Narrow design for tight access and indoor use. High maneuverability and off-road capability. Robust, powerful, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. You can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machines. Our team will be happy to provide you with expert and personal advice.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) Hnjdpfjh Ad E Hsx Aitsu 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 44 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 181 mm, Telescopic forklift, rigid frame ISO class: ISO class 2 = 1,000 - 2,500 kg Hjdpfez Dln Aox Aitsnu Technical condition: New Front tire type: Air Rear tire type: Air Battery voltage: 12V - Fork carriage L1000 CAF 10003T, 2 forks Rear work light, front work light, full cabin, CE certificate - TIRES CAMSO SKS532 1216.5 I45A2 - INTERIOR REARVIEW MIRROR - RADIO ANTENNA - RADIO PREPARATION - INFO: ADDITIONAL HYDRAULIC FUNCTION - JSM TILT FUNCTION SHUTDOWN - WORK LIGHTS FRONT AND REAR ON THE CABIN 4X - SUN VISOR ON THE WINDSCREEN AND ROOF - REARVIEW MIRROR ON THE REAR OF THE MACHINE - ROOF WIPER - BATTERY COLD COUNTRY 12V 110AH900A - GREASE NIPPLE PROTECTION - TÜV PREPARATION 35 KM/H - POWER CABLE 95MM - SPEED 35 KM/H - LICENSE PLATE LIGHT AT THE REAR - PLATFORM CONTROL - EU VERSION - EASY UNK STD MODULE - CE MACHINE APPROVAL AND ABE ROAD

Condition: excellent (used), power: 54 kW (73.42 HP), fuel type: diesel, color: other, lifting height: 5,850 mm, Year of construction: 2014, operating hours: 4,124 h, Number of cylinders: 4 Empty weight: 4.500 kg Dimensions (LxBxH): 382 x 181 x 192 cm Engine type: Kubota V3307-CR-T-EW02 Lifting capacity: 2.500 kg Quick coupler system: Yes CE mark: yes Technical condition: very good Hnsdszzcv Uopfx Aitju Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Mudguards - Pallet forks - Quick change - Radio - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Frankrijk

Condition: ready for operation (used), Fasti Beading Machine Size 4 150 x 4mm Output Max. Throat 500mm Hydraulic adjustment of the top roller via foot switch Hodpfov Tqy Njx Aitsnu Right/left rotation Continuous speed adjustment via handwheel 60mm Mount Weight approx. 1500kg with accessories Year of manufacture 1963 Space requirement approx. 1000x1000x1750mm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 175 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,181 mm, Rigid telehandler Technical condition: New Hnodpfsvgh Rfsx Aitou Front tyres condition: 80 - 100% 3rd valve, rear work light, front work light, heater, solenoid valve, soot filter, full cab, CE certificate, engine heater, roof window wiper