Telescopic forklift

Manitou MT 1840 A 100D ST5 S1

Condition: used, Year of construction: 2025, load capacity: 4,000 kg, lifting height: 17,550 mm, total length: 7,445 mm, · Max. Tragkraft 4000 kg · höhe 17.55 m · Maximale seitliche Reichweite 13.08 m · Ausbrechkraft mit Schaufel 8391 daN · Kippwinkel 12 ° · Schüttwinkel 114 ° · Wenderadius (über Räder) 3.94 m · Heben 14 s · Senken 14 s · Teleskop ausfahren 19 s · Teleskop Einfahren 15 s · Auskippen 5 s Iedpfx Aeym D Nnekxeia · Motornorm Stage V · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW) 100 Hp / 75 kW · Max. Drehmoment / Motordrehzahl 410 Nm @ 1600 rpm · Zugkraft: 8391 daN · Getriebetyp: Drehmomentwandler · Anzahl der Gänge (vorwärts / rückwärts): 4 / 4 · Fahrgeschwindigkeit (beladen): 25 km/h · Max. travel speed: 24.90 km/h · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad-Lamellenbremse an Vorder- und Hinterachse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge / Hydraulikdruck: 167 l/min-270 bar · Motoröl: 10 l · Hydrauliköl 135 l · Fassungsvermögen des Kraftstofftanks 140 l · Inhalt DEF Tank 22.60 l · Geräuschpegel im Fahrerstand (LpA) 79 dB · Umgebungsgeräusch (LwA) 106 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Antriebsräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: ROPS - FOPS Stufe 2 Kabine · Steuerungen: JSM

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 44 h, load capacity: 4,500 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Iiodpfx Aew Eqc Hokxja 3rd valve, 4th valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 ICARUS 45.17 DYNAMIC ST.V IT 1 ST ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval 20 KM/H (only for Germany) - Automatic 45% locking differential on the second axle Hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Open center system Wheel set#400/70-24#Power CL Michelin with mudguards Fixed Dieci equipment carrier plate Boom swing damping (Not compatible with basket pre-equipment) Standard heating Air suspension seat Indicator light correct steering Set car radio preparation Cab comfort kit (sunshade ,rear storage net, dual USB port) Standard rear view mirror right and left FNR lever under the steering wheel - Rear view camera, integrated in the machine's display. LED headlights on boom head Two rear swivel LED work lights on cab LED work lights (1 on the right side, 1 on the left side, 1 at the rear) Road headlights (front) with LED daytime running lights. Rear-view mirror 7-pin trailer socket. Pair of floating forks 120 x 50 mm, L = 1200. 5.0 t load capacity

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Iijdpsgbfaxjfx Akxsa Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: new, power: 118 kW (160.44 HP), gearing type: hydrostat, fuel type: diesel, emission class: euro2, Year of construction: 2025, = Additional options and accessories = - Digger blade Iiedew Duxiopfx Akxea - Intercoolor - Mp-3 = Remarks = Model description: Develon DX210WA Wheel Excavator MY2025 Heavy Equipment Code Diesel Country of Origin: South Korea Engine model: DB58TIS 2 valves per cylinder, vertical injectors, water cooled, turbo charged with air to air intercooler Operation weight (tons): 20.8 Main Pumps: 2 variable displacement axial piston pumps max flow: 2 x 231.7ℓ/min Bucket Size (CUM): 1.05 Travel speed: 36 km/h Tires: 10.0-20-16PR Attachments Piping: Available Shipping Dimension (L x W x H) (m): 9,470 x 2,500 x 3,490 Arm Length: 3,000 mm Boom Length: 5,600 mm Max. Digging Depth: 6,255 mm Max. Dumping Hight: 7,250 mm wheelbase: 2,850 Euro: Tier 2 / Euro 2 9.7-INCH MONITOR - Bigger LCD monitor with user-friendly touch screen panel allowing easy access to machine settings and maintenance data ALL ROUND VISIBILITY - Enlarged front shield assures best possible all-around visibility. Panoramic cabin windows andsuitable seat position assists on safety and controllability promotion via enhanced lower part of visibility on side position. Incrowded city streets or in hazardous construction workplace operator can get better control and command of surroundings SIMPLE MECHANICAL ENGINE - In-house mechanical engine with approachable structure Engine bonnet equipped with wide open side panel Fuel filler Pump Steel Roof cover Lower Wiber = More information = Drive: Wheel Empty weight: 20.800 kg Dimensions (LxBxH): 947 x 250 x 341 cm Wheelbase: 285 cm Engine type: Doosan DB58TIS Top speed: 36 km/h Digging depth: 6.255 m Bucket volume: 1.05 m^3 Unloading height: 7.25 m

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Iedsfu Ivzepfx Akxsia • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Ijdpfx Aksra N A Nexjia Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW Isdpovprv Rofx Akxsia weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Iiedpfxjua Tl Ae Akxja Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: used, power: 54 kW (73.42 HP), fuel type: diesel, fuel tank capacity: 146 l, lifting height: 18,000 mm, Year of construction: 2023, operating hours: 2,010 h, Year of manufacture: 2023 Empty weight: 11.520 kg Iedpfex Itv Uox Akxoia Carrying capacity: 4.000 kg GVW: 15.520 kg Dimensions (LxBxH): 626 x 232 x 270 cm Working height: 1.800 cm

Condition: excellent (used), functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, tire condition: 80 %, axle configuration: 2 axles, number of seats: 1, Year of construction: 2014, operating hours: 9,000 h, Equipment: air conditioning, all wheel drive, cabin, hydraulics, Title: Terex TW110 Wheeled Excavator – Year 2014 – Excellent Condition – Immediately Ready for Use Description: For sale is a well-maintained Terex TW110 wheeled excavator from 2014. The machine is in very good condition, fully operational, and ready for immediate use. It is ideal for worksites with limited space without compromising on lifting capacity. Technical Specifications: Make/Model: Terex TW110 Year of manufacture: 2014 Operating hours: 9,000 h Condition: Very good, technically flawless and ready for immediate use Equipment & Features: Boom: Articulated boom and hydraulically adjustable boom for maximum flexibility Iiodpfx Aeytb D Njkxoa Hydraulics: Grab and hammer circuit (auxiliary hydraulics) Coupler system: Hydraulic quick coupler (Oil) Attachments: Including digging bucket Undercarriage: Robust dozer blade Cab: Comfort cab with air conditioning and rear-view camera Asking price: €39,500 (negotiable)