Telehandler / Telescope Forklift

Manitou MLT 625 H CLASSIC

Condition: new, functionality: fully functional, machine/vehicle number: HR14621, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Rigid Telehandler VIN: HR14621 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Podewlw Ayepfx Adnjrd Transmission: Hydrostatic Condition: New Technical condition: New Front tires type: Pneumatic Front tires size: 30075 R18 142A8 A580 Alliance Front tires condition: New Rear tires type: Pneumatic Rear tires size: 30075 R18 142A8 A580 Alliance Rear tires condition: New Description: 12-month factory warranty / Max. 2,000 operating hours Rear work lights, front work lights, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, interior mirror, joystick, rotating beacon, windshield wipers, seat, antenna, radio Vibration damping for telescopic boom Active CRC Additional hydraulic function Work lights at the front and rear of the cabin 4x Packet Classic Car radio Air-suspended seat with textile cover Rear view mirror at the rear of the cabin Roof window wiper Sun visor Front roof window Phone holder Power cable 95mm Flow sharing Quick release device Engine oil TÜV preparation 20 km/h

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW Predpfevcrmpex Adnod weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 Pjdpfx Adowwwqhensrd tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: new, High quality benchtop bending machine with top features. FLOTT TB 15 Plus (212755) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Spindle: MK II drilling depth (mm): 70 Tapping capacity (depending on pitch): M12 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Stop ring (form fit) Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,75 continuous/normal drilling capacity (mm): 15/18 (in E335/ST60) throat depth (mm): 220 column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Prodpfei Hp D Aex Adnjd Spindle/working surface (mm): 85-370 (table), 420 (foot) T-slot size (arm), distance (mm), dimension width (mm): Cross grooves, number 2, 14/26 spindle speed stepless (1/min): 40 - 4000 machine dimension without packing (mm): 400 x 520 x 850 machine dimension with packing (mm): 452 x 700 x 1.130 weight (kg): 65 Note: For all other models, please contact us.

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 2,500 mm, total width: 850 mm, overall weight: 155 kg, inner dimension width: 733 mm, inner dimension length: 2,343 mm, tank capacity: 753 l, energy consumption: 5 kWh, power: 50 kW (67.98 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Pjdpfxerhwrbo Adnord - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: new, Year of construction: 2025, We present our latest model of disc chipper, WOODGRAIN BX52RS, designed for effective shredding of branches, tree trunks with a diameter of up to 12 cm, as well as offshoots up to 25 cm. It is not just a chipper - it is an advanced tool that integrates modern solutions for even better efficiency and safety, in accordance with the latest EU directives. EQUIPPED WITH A SAFETY SWITCH that allows immediate disconnection of the power supply, and consequently prevents or minimizes the risk!!! BE CAREFUL ABOUT COUNTERFEITS, DANGEROUS DEVICES WITHOUT A SAFETY SWITCH ARE NOT ALLOWED FOR SALE UNDER POLISH LAW!!! The distinctive features of this model are the hydraulic material feeding system, which makes work even more effective. The new generation of the hydraulic system, with its own pump and oil tank, ensures not only safety but also efficiency. Additionally, the chipper has been equipped with its own hydraulic pump and hydraulic oil tank, powering two rollers feeding material to the knife disc. The drive from the tractor to the chipper is transferred by means of a transmission shaft, and the material collection mechanism is characterized by a smooth 10-step collection speed regulator, a material withdrawal function and an emergency stop. Work safety has been raised to a higher level thanks to safeguards and covers. The massive cutting disc with a diameter of 63 cm and a thickness of 2 cm is another advantage of the chipper. Considering the weight of the disc, which is 65 kg, the chipper does not burden the engine to a large extent, which distinguishes it from drum or roller chippers. The disc is equipped with 4 double-sided sharpened knives and one counter knife mounted in the chipper base. Additionally, the breakers (shovels) that crush the obtained chips to a value of 20-50 mm make the shredding process even more effective. The chipper also has a disc locking latch, facilitating the replacement of knives, and the produced chips are thrown out through a pipe rotated 360 ° in relation to the chipper base. Additionally, as part of our promotion, we are including a FREE PTO shaft. This is an ideal tool for professionals who value not only efficiency, but also innovative solutions and safety. Technical parameters Size of shredded material 12cm diameter (maximum 25cm with offshoots) Drive system Drive from the tractor engine transmitted through the PTO Minimum power 30 HP Rotor size 63 cm Number of cutting knives 4 + 1 counter blade Knife type hardened tool steel CR12 Rotor weight 58kg Prsdpfxovxtd Uj Adnod Material Feed Mechanism Own hydraulic pump driving two shafts Fastening system three-point suspension system (TUZ) Dimensions 195 cm L x 135 cm W x 190 cm H Feed hopper 82x60cm Ejection tube rotation range 360° Ejection tube height 190 cm Rated RPM/Rated RPM 540-1000 per minute Wood chipper weight 480kg Manufacturer: Cormak

Year of construction: 2021, condition: new, Directly available from stock List on request Pedpfx Adeica Amonord 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: new, Year of construction: 2025, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Prsdohvibzepfx Adnsd Weight: 375 kg Efficiency 88,2 Energy efficiency class: A+ EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Transmission: Hydrostatic Speed Category: 20 Condition: New machine Technical Condition: New Front Tyre Type: Pneumatic Front Tyre Size: 18 - 22 Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Size: 18 - 22 Pjdpfx Aswbw Hkjdnerd Rear Tyre Condition: 80 - 100% Description: Thanks to its 3-in-1 design (telescopic handler, crane, and aerial work platform), the MRT 2660 is a highly versatile solution for your handling operations. The MRT 2660 boasts a maximum lifting capacity of up to 6 tonnes and, thanks to its pentagonal boom cross-section and outstanding 360° visibility, ensures precise control of your loads. The 360° continuous rotation enables you to perform various tasks without repositioning the machine. It can be operated on wheels or stabilisers, providing a larger footprint for safe working conditions. Intelligent, ergonomic, and comfortable, the MRT 2660 is ideally suited for construction and industrial applications. This is a powerful and precise tool you won't want to do without! Various attachments including a personnel basket, winch, or bucket are available for this telescopic forklift. 3rd hydraulic circuit, heater, full cab, air-conditioning system, Remote control for both work and drive operations.

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Podpfjrgq Etsx Adnord Please provide your telephone number when making inquiries!