Refrigerated/frozen transport

MAN TGS 33.360 BB CH 6x4 Refrigerated Box Truck

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Yunnei EUR5, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift CE EUR5 Diesel engine EUR5 Yunnei DEF30CZEF5 74 kW 100 km 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included Crodpfxeuzivve Amaef additional 2000mm forks the fork is NEW CE certyficate PayPal payment available

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 Cedpfszak Hgox Amaerf T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: excellent (used), functionality: fully functional, mileage: 16,350 km, fuel type: diesel, overall weight: 48,000 kg, tire condition: 75 %, axle configuration: 8x4, fuel: diesel, color: blue, total length: 16,200 mm, total width: 2,540 mm, total height: 3,990 mm, Year of construction: 2019, operating hours: 1,215 h, Equipment: ABS, car registration, truck registration, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 1,215.6 h Mileage: 16,350.9 km Crane manufacturer: Palfinger Crane model: P 900 Chassis manufacturer: Volvo Axle configuration: 8x4 Drive: Diesel Transmission: Automatic Emission class: Euro 6 Gross vehicle weight: 48,000 kg Tyres: Continental Tyre condition: approx. 75% CE certification: Yes === CRANE SPECIFICATIONS === Crane type: Telescopic truck-mounted crane Maximum working height: approx. 90 m Maximum outreach: approx. 32.5 m Maximum lifting capacity: According to Palfinger load charts Stabilizers: Hydraulic outriggers Remote control: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified with full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Machine in good working condition Fully inspected and tested Inspection possible upon request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request, EXW, excl. VAT === DESCRIPTION === Heavy-duty Palfinger P 900 truck-mounted crane mounted on a Volvo 8x4 chassis Ideal for professional lifting operations requiring high working height and long outreach Part of a professionally maintained fleet Fully CE certified and immediately ready for use Spare parts and professional technical support available on request Crodsygvitjpfx Amaef === DELIVERY === Crane loading available on request for smooth dispatch Flexible shipping options tailored to destination and logistics requirements All transport operations professionally handled by the logistics team of Collé Rental & Sales

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table Crsdpfxsnyh Sij Amajf * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling Cjdpfewvgbgjx Amajrf - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm Csdpet Ac Efsfx Amasrf A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: good (used), Year of construction: 2014, Vehicle description Crjdpov D Dqvofx Amasf Mobile excavator TAKEUCHI TB295W Year of manufacture 2014 according to counter 9,709 hours 10,700 KG 77 KW - POWERTILT - hydraulic quick coupler - all lines - slope bucket - 2 buckets - blade - claws - central lubrication - air conditioning - reversing camera and and and... Nice and good original condition with original paint! Sale price: 49,950.00 net Cheap delivery also possible!

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,960 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,140 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 6,640 kg, total length: 4,780 mm, drive type: Diesel, construction width: 2,060 mm, Rigid telehandler Load center: 500 mm Mast type: telescopic Transmission: torque converter with M-Varioshift Speed class: 20 km/h Condition: operational and fully functional Cjdpfjytytpjx Amaerf Technical condition: normal Front tires type: pneumatic Front tires size: 405/70 R20 Front tires condition: 60 - 80% Rear tires type: pneumatic Rear tires size: 405/70 R20 Rear tires condition: 60 - 80% 3rd hydraulic valve, rear work light, front work light, heater, full cab, air conditioning, CE certificate, external mirrors, optional with bucket

Condition: good (used), functionality: fully functional, first registration: 07/2015, fuel type: diesel, overall weight: 7,500 kg, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 8,650 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, central locking, crane, fog lights, onboard computer, === MAIN SPECIFICATIONS === Year: 2015 Hours: 5510 h Credsyr Nkzjpfx Amaef Working height: 30 m Max. horizontal outreach: 19.5 m Platform capacity: 350 kg Truck type: MAN Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cabin: Single Engine power: — Fuel type: Diesel Platform dimensions (L x W): 1.6 m working cage Platform rotation: Yes (80° + 80°) Boom type: Telescopic / articulated combination Stabilisers: Yes – hydraulic outriggers CE certification: Yes Total vehicle weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Reliable truck mounted access platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a horizontal outreach of up to 19.5 meters, making it ideal for maintenance, installation, construction and infrastructure work. The machine is equipped with hydraulic outriggers, automatic cage levelling and a rotating aluminium working platform, ensuring stable and safe operation in various working environments. All machines are fully inspected, CE-certified and ready for immediate use. === DELIVERY === Crane loading available upon request for smooth transportation. Flexible shipping options tailored to your destination and logistics preferences. All transports handled professionally by the logistics team of Collé Rental & Sales.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. Cjdszb Evlepfx Amajrf SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity