Flatbed truck with tarp

MAN TGM 15.290/LBW Palfinger 1500K/Edscha

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section Bdedpsi Ai E Rjfx Aknei -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Bdsdjv Ip Sgepfx Aknei

Condition: used, mileage: 1,149,983 km, power: 251 kW (341.26 HP), first registration: 03/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 6,481 mm, loading space width: 2,545 mm, loading space height: 3,005 mm, Equipment: air conditioning, parking heater, * Engine runs, many fault codes, various missing parts! Bjdpevhuqbsfx Aknedi * Multifunction steering wheel * Air conditioning * Auxiliary heater * Second bunk * Cruise control * Leaf/air suspension * Flatbed with tarpaulin body -----Internal vehicle number: 9718----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to message us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: good (used), Year of construction: 1990, For sale: forklift Clark C500 Y 130 PD The forklift has been in continuous use at our company – although only occasionally for handling heavier loads. We have been using it in our company for 7 years. It is in good condition. We are selling it because we want to purchase a model with a higher lifting capacity (10 tons). Technical Specifications: Model: Clark C500 Y 130 PD Year: 1990 Maximum lifting height: 535 cm Bdodpfx Akju D D H Isnji Minimum total height: 370 cm Fork length: 155 cm Capacity: 6 tons (6000 kg) Total weight: approximately 8500 kg Transmission: hydrostatic (with multiple speeds to choose from) The price is €7950, but we will consider a better offer. Tags: forklift, Clark, Jungheinrich, Linde, OM, CAT, Cesab, Detas, Manitou, Still, Hyster.

Condition: excellent (used), mileage: 138,600 km, power: 132 kW (179.47 HP), first registration: 05/2011, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, loading space length: 5,500 mm, loading space width: 2,300 mm, loading space height: 2,350 mm, Year of construction: 2011, Equipment: tail-lift, Well-maintained Renault Midlum 180 service truck/box truck from 2011. Ideal for road construction, utility companies, technicians, service personnel, or as a mobile workshop. Well-maintained and ready for immediate use. Bedpfozpfglox Aknjdi Make: Renault Model: Midlum 180 First registration: 05/04/2011 Emission standard: 5 Cargo area: Length: 5.5 m Width: 2.3 m Height: 2.35 m Payload: 3845 kg Gross vehicle weight: 80 kg Towing capacity: 3500 kg Front tire tread: +/- 50% Rear tire tread: +/- 50% About Cevoman: ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected in our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experienced in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, mileage: 200,000 km, power: 375 kW (509.86 HP), first registration: 05/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,370 mm, loading space height: 850 mm, Year of construction: 2020, Equipment: ABS, air conditioning, navigation system, * Mercedes Arocs 2851 MP5, two-sided tipper with Bordmatic and hydraulic flap * First registration: 2020 * 200,000 km * Euro6D * 6 x 4 * Leaf spring - air suspension * Automatic climate control * Retarder * Trailer coupling * Camera * Plank Thaur body * 4.90 x 2.37 x 0.85 m * Unladen weight: 13,910 kg * Gross vehicle weight: 28,000 kg * 12,015 kg payload at 26,000 kg * Wheelbase: 3.35 m ---- Special equipment: Storage compartment above the windshield with a lid, front axle load 9.0 t, step with handrail on the roof, two-part exhaust system, batteries arranged one above the other, bi-xenon headlights, CB radio, interactive cockpit multimedia system, air horns (2) on the cab roof, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, remote online function, additional parking brake on the front axle, speed limiter, 12-speed transmission - type: G 330-12, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cool box/refrigerator, air intake from the front, illuminated Mercedes star, reinforced engine brake, navigation system, programmable special module, wheelbase variant 3300 mm, frame overhang 900 mm, smoker's package, retarder, acoustic reversing warning (external warning signal), rear window, headlight cleaning system, additional key with remote control (2), circuit breaker, seat cover/upholstery: passenger seat, velours, seat cover/upholstery: driver's seat, velours, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: driver's seat, comfort sprung seat, external sun visor, steel rims 11.75x22.5 (on the front axle), additional 24V socket in the passenger footwell, door extension for the cab, preparation for work lights on the rear cab wall, preparation for 4 surround cameras (display in the on-board monitor), preparation for a rotating beacon, additional thermal insulation, oil cooler for the transmission Bjdpfjzhznijx Aknodi Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated exterior/front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, Arocs 5, exhaust to the right side, battery 170 Ah, compressed air connection in the cab, compressed air tank, steel, compressed air unit with condensate monitoring, compressed air unit, medium, automatic switching for headlights (light sensor), cab: cab entrance, movable, cab: hydraulic tilting device, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, electric windows, tinted windshield, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), body/superstructure: chassis for tipper, comfort locking system, steering assistance pump, unregulated, steering wheel with multi-function, steering oil cooling, air compressor 2-cylinder, heated air dryer, engine 12.8 liters - 375 kW R6 diesel (OM 471), engine variant OM 471, auxiliary drive MB 131-2c, type of use: local transport, wheelbase not defined, frame lowering without air spring residual pressure regulation, ramp mirrors, waste heat utilization, disc brakes with full protection, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger functional seat, front axle stabilizer, steel rims 9.00x22.5, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EG control device, Truck Data Center 7 (fleet management system), fixed rear underrun protection, preparation for toll collection, preparat

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Bjdoqx Sznspfx Aknodi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Bdedpfoi Riw Asx Aknoi Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG18000SE-3D, overall weight: 280 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 13 kW (17.68 HP), output current: 50 A, output voltage: 230 V, nominal power: 12 kW (16.32 HP), continuous power: 12 kW (16.32 HP), total length: 1,220 mm, total width: 750 mm, total height: 810 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG18000SE-3D generator offers a continuous output of 12 kW with its reliable 4-stroke engine. You can operate the DG18000SE-3D generator for up to 8–10 hours with its 30-liter tank. You can start the generator via electric start or recoil start. The starter battery is charged during operation, thus enabling easy starting the next time you use it. Technical data: Bdedszvm A Uepfx Aknsi Maximum power: 13 kW Rated power: 12 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil start Noise level (7m): 75–78 dB Tank capacity: 30 L Dimensions: 1220 × 750 × 810 mm Weight: 280 kg

Condition: good (used), mileage: 533,634 km, power: 353 kW (479.95 HP), first registration: 03/2010, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Equipment: ABS, AdBlue, air conditioning, central locking, crane, electric window regulation, power assisted steering, = Further options and accessories = - Brake booster - Speed limiter - Cab - Air horn - PTO (power take-off) - Sun visor flap - Toolbox = Further information = Technical information Transmission: I-Shift, automatic Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 28,080 kg Payload: 3,920 kg Gross vehicle weight: 32,000 kg Functional Boom: Telescopic (8 sections) Boom length: 19.65 m Lifting capacity: 20,350 kg Body brand: EFFER 1355/8S CROS-STAB CE marking: yes Condition Technical condition: good Optical condition: good VOLVO FH 480 8x4 Tractor unit + EFFER 1355/8S crane EURO 5 L PACKAGE 480 HP DRIVE 8x4 WHEELBASE 510 cm AIR SUSPENDED FH SLEEPER CAB WITH AIR CONDITIONING REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ADJUSTABLE FIFTH WHEEL TOOLBOXES EFFER 1355/8S OIL COOLER FOR CRANE HYDRAULICS TOTAL 8X HYDRAULICALLY EXTENDABLE MAX WORKING HEIGHT 23 METERS!! MAX LIFTING CAPACITY 20350 KG MAX LIFTING CAPACITY AT 19.65 METERS 4080 KG LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS TOTAL 4X OUTRIGGERS CRANE CAN OPERATE 100% IN FRONT OF THE CAB THANKS TO CROSSTAB OUTRIGGER RADIO REMOTE CONTROL Bsdpfeyiulrox Aknedi FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL