Used Zopf Zb 100/3 H for sale (97,682)

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs Chjdpfjd Ey A Asx Afgoc interpolation

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts Csdjd Eyz Uopfx Afgshc - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set Chsdpfx Afodkxiyegsc TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: new, Year of construction: 2026, Profile Bending Machine ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW Cedpsdkxibofx Afgshc - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg - dimensions: 980x1430x1600 mm

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic Chedpofkz Rbefx Afgoc - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers Chodpsd A Nb Hefx Afgoc - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2025, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg Cjdjhmbh Hspfx Afgehc - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015

Condition: new, Year of construction: 2026, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph Cedpfxegh T Iae Afgjhc - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, shaft diameter 60 mm Shaft revolutions 6 U/min roll diameter 215 mm pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function Codpey H N Evsfx Afgehc - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller Cjdey H N Haopfx Afgjhc - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW Cjdpfx Ajy H N E Aofgshc weight 720 kg dimensions 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm Chjdpfxjgh T Hro Afgjc - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2026 - motorized Csdpfxjgh T Hkj Afgehc - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: new, 80 mm roll diameter 260 mm 7 U/min 170 mm 27 kN 160 mm 450 mm total power requirement 3,7 kW dimensions 980x1430x1600 mm weight 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend Chjdpfxsy H N Hys Afgsc different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, roll diameter 350 mm 110 mm bending speed 1-5 m/min Bending capacity 157 Wcm³ total power requirement 7,5 kW weight of the machine ca. 2950 kg Domestic equipments: Chsdpfx Afjy H N Hgjgjc - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage Chjdsy H N H Topfx Afgec - The standard roller set is included. He can turn used different profiles

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit - up to 1000 different programs - electronic measurement of length and angle Cedpfod H Rhiox Afgjhc - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours Chodpfxstwliwe Afgoc with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation Cjdpfx Ajv Skzdjfgjhc - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: used, Year of construction: 2000, functionality: fully functional, power: 14 kW (19.03 HP), cutting width (max.): 3,800 mm, Equipment: CE marking, Giben Prismatic 2 SP H.100, year 2000 for sale! Working width 3800 mm Number of grippers 6 Saw blade projection 100 mm Chodpfez H H U Nex Afgsc Installed power: 14 kW

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Csdpfxjy H N Iks Afgshc Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Chjdezbql Sepfx Afgjc Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) Chedodktnvepfx Afgjc - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Cedpfxjzrwc Ds Afgohc Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2004, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2004 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Chedpeyt H Awefx Afgjc Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST