Used Yizumi Un420A5/ Iu3330 D=92 for sale (47,374)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 92 mm, clearance between the columns: 830 mm, displacement volume: 2,458 cm³, injection pressure: 1,360 bar, injection weight: 2,262 g, mold height (min.): 260 mm, ejector force: 110 N, ejector stroke: 220 mm, plate width: 1,165 mm, plate height: 1,145 mm, total length: 8,750 mm, total width: 2,200 mm, total height: 2,200 mm, overall weight: 20,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 248 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN420A5-3330 D=92 Clamping force: 420T Hodpfxszz Srrs Ap Hont Tie bar spacing: 830x810 Mold height: 180 to 550 Robot interfaces: Euromap 67, Euromap 18 Suitable robot available upon request. Basic standard equipment: CS standard KEBA 1175 control system UK version Standard screw and cylinder unit Environmentally friendly insulating cover

Condition: used, Year of construction: 2008, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 920 mm center height over bed 160 mm turning diameter in the gap 430 mm centre distance 920 mm bed width 181 mm digital readout DPA 2000 3 Achsen spindle bore Ø 38 mm turning speed range 10 - 2.500 U/min power requirement 1,5 kW 3-jaw-chuck diameter 160 mm taper in tailstock-quill MK 3 dia. of quill 32 mm Hjdpfx Apszzrdbs Hjnt quill stroke 100 mm voltage 400 V weight of the machine ca. 410 kg dimensions of the machine ca. 1,60 x 0,70 x 1,55 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 832432 - 3-axis digital display DPA 2000 - Constant cutting speed - Stepless speed control - Digital speed display - RÖHM 3-jaw flat spiral chuck - Face plate Ø 255 mm - Fixed steady rest - Rotating steady rest - Machine light - Rotating center point

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Hjdpfx Apezz Sikj Hsnt Special options: Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket Hnedpfezz Rkasx Ap Het 6 freely programmable input/output signals Centering rings on both platens

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Hodpozz Sw Iefx Ap Hsnt Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Tool thickness increased by 100 mm Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)

Condition: used, Year of construction: 1995, Cutting line Polar 92ED Year: 1995 Consisting of Paper jogger Polar R2 Year: 2007 Guillotine Polar 92ED Year: 1995 Description - Colour monitor - Side table on the left Hnedpfjzvd Nrjx Ap Hjt - Side table on the right - Cutting table with air - Air blower - Photocell protection - Number of knives: 2

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Hnsdpfx Apszz Smce Hjt Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 40 mm, clearance between the columns: 310 mm, displacement volume: 207 cm³, injection pressure: 142 bar, injection weight: 191 g, mold height (min.): 120 mm, ejector force: 22 N, ejector stroke: 60 mm, plate width: 470 mm, plate height: 470 mm, total length: 4,437 mm, total width: 1,418 mm, total height: 1,560 mm, overall weight: 2,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 95 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN60A5-IU295 D=40 Clamping force: 60T Tie bar spacing: 310x310 Tool installation height: 120 to 330 Robot interfaces: Euromap 18 and Euromap 67 Basic standard equipment A suitable 6 kg linear robot is available upon request. Hodpfx Apozzz N Te Hsnt

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 Hnodpfxezz Spdj Ap Hot 1 set with 6 glass flow meters EU67

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Hnodozz Sp Rspfx Ap Hot Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 834 cm³, injection pressure: 2,310 bar, injection weight: 767 g, mold height (min.): 250 mm, ejector force: 55 N, ejector stroke: 150 mm, plate width: 970 mm, plate height: 970 mm, total length: 7,150 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 12,900 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF300 IU1930 D=60 Hnodpfxezz Stpj Ap Het Fully electric injection molding machine. Ejector, nozzle system, and core pulls are servo-hydraulically controlled. Clamping force: 300T Tie bar spacing: 720x720 Tool installation height: 250 to 650 Robot interfaces: Euromap 67, Euromap 18 Warranty can optionally be extended to 24 or 36 months. Suitable linear robot available upon request. Standard equipment: see brochure. Optional equipment: CE standard Hybrid machine KEBA 8000 control system PID control of the nozzle.

Year of construction: 2010, condition: excellent (used), Automatic pallet wrapper with film pre-stretching Inventory no. 3928 Manufacturer: ProtoWraptor Type: PLUS - IDP * Turntable positioning via fixed stop * Number of top and bottom wraps * Turntable diameter: 1650 mm !!!! * Max. wrapping height: approx. 2400 mm !! * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! Hedsychv Dopfx Ap Hent * Ramp!!! * In very good condition.

Condition: good (used), Year of construction: 2008, total width: 920 mm, Technical specifications of the WOHLENBERG MCS-2 92 paper cutting machine: maximum cutting length: 920 mm opening: 920 mm air table with side tables (right and left) Hsdszxrtdjpfx Ap Hjnt hydraulic clamping system with adjustable pressure support bar under the clamping system spare blade safety guards power supply: 3x 380 V; 50 Hz

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections Hsdpfx Apjzzn Hls Hjnt 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Hnedpfx Aox Ruudep Hot Infeed and outfeed Cross Transfers.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 04/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2010, Equipment: ABS, In accordance with our General Terms and Conditions, and without any warranty or guarantee, we are pleased to offer you the following vehicle without obligation and subject to prior sale, errors, or typographical mistakes: Kraker 92 cbm Moving Floor Trailer (Vehicle No. 109) First registration: 12.03.2010 Type: CF 200 Perm. total weight: 35,000 kg Dimensions: Length 14,010 mm x Width 2,550 mm x Height 3,800 mm Loading volume: 92 cbm TÜV valid until 04/2026 Sliding tarpaulin, platform Portal doors split 1/2 + 1/2 at the rear Clean floor and end sections Remote control for moving floor Cargo Floor system 2 x LED work lights above drop supports Drop supports BPW axles Hjdpfx Apjzir Trj Hont 1st axle lift Tyres: 385/65R22.5 (1st approx. 40/50%, 2nd approx. 60/40%, 3rd approx. 30/70%) Wheel chock 1 pair of LED work lights behind the 3rd axle WABCO ABS Air suspension Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our General Terms and Conditions apply. The place of jurisdiction for both parties up to a disputed amount of €100,000 is the local court of Ludwigslust; for higher disputed amounts, the regional court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle Hnodpfezmxi Usx Ap Hjt -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi

Condition: used, Year of construction: 2001, Display Hjdoyyvndepfx Ap Hsnt Program Airtable, Table left, Table right Available: at short term

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Hnjdpfxjx Ez Umo Ap Hot Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle bore: 50 mm, turning diameter: 190 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 190 mm, center height: 170 mm, center width: 700 mm, turning length: 600 mm, quill stroke: 120 mm, total length: 1,596 mm, total width: 880 mm, total height: 1,240 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, type of input current: AC, overall weight: 730 kg, Equipment: rotational speed infinitely variable, Due to restructuring measures, we are selling our conventional lathe – EMCO EM 17 D. - Year of manufacture: 2005 - Good condition - Fully functional - Distance between centers: 700 mm / Center height: 170 mm - Max. turning diameter: 340 mm (190 mm over cross slide) - Max. turning length: 600 mm - Spindle max. 3,000 rpm – 5.3 kW - Speed infinitely adjustable (frequency control) - 4-speed gearbox – with reduction - Constant cutting speed adjustable Hnjdpsz Aff Iofx Ap Het - 3-jaw chuck 200 mm - 2+1-axis digital display - Complete machine documentation - Depending on the price, various tool holders, a 4-jaw chuck (faceplate) 200 mm, and a collet chuck device (tube and collet) can be purchased. - The machine can be inspected while powered on. - Full spare parts supply and service provided by EMCO. This offer is subject to change. Sale is subject to prior sale. No online sales. The sale is only to businesses after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) – no shipping.

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg Hsdpfxjzd Eqys Ap Hjnt

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 560 mm, insertion height: 80 mm, table height: 900 mm, cutting length (max.): 560 mm, overall weight: 575 kg, type of input current: three-phase, total width: 1,670 mm, total height: 1,500 mm, working width: 2,400 mm, total length: 1,150 mm, input voltage: 400 V, table width: 2,400 mm, input frequency: 50 Hz, lifting height: 80 mm, Equipment: documentation/manual, safety light barrier, The (POLAR) Mohr D 56 ECO is a robust, hydraulically powered paper cutting machine. The machine is supplied with an original POLAR spare blade, hydraulic oil, a blade changing kit, grease gun, and various other tools. Tables on the left and right sides are optional. If desired, these can be disassembled, for example, when space is limited. Hnedpfx Apez Aq D Ne Het - Model: (POLAR) Mohr D56 ECO - Type: hydraulic paper cutting machine - Cutting width: 560 mm - Table depth: 560 mm - Maximum feed height: 80 mm - Clamping force: 200–1,200 daN - Rear gauge speed: 70 mm/sec - Smallest automatic cut without spacer: 15 mm - Smallest automatic cut with spacer: 50 mm - Control: 5.5" monochrome display with membrane keypad - Memory: maximum 198 programs - Hydraulic, precise, and material-friendly swing cut - Adjustable clamping pressure and pre-clamping time - LED marking of the cutting line - Smooth stainless steel table surface for easy material transport - Simple blade change and fine adjustment at the front Dimensions (W × D × H): 1,150 × 1,670 × 1,500 mm This machine has been inspected and thoroughly tested by our own specialized technical department. If you require any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: good (used), Year of construction: 1992, operating hours: 14,148 h, Linde H16T Triplo 470 Freelift / 3rd function on the mast / VW 1992 / 14,050 hours, LPG powered. Dutch registration. Hodjzxq Sljpfx Ap Hont A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for an inspection and/or test drive. Please call beforehand as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2016, Spiral mixer Diosna SP 120 D Dough capacity: 120 kg Flour capacity: 75 kg Hjdpfx Aoz A Sb Hop Hont Timer control system Two timers Two speed settings Reverse operation Movable with locking mechanism

Condition: excellent (used), Year of construction: 2018, operating hours: 2,006 h, functionality: fully functional, working width: 1,045 mm, area performance: 16,550 m²/h, overall weight: 2,635 kg, warranty duration: 12 months, tank capacity: 180 l, water tank capacity: 300 l, noise level: 92 dB, We offer a ride-on scrubber dryer Karcher B 300 R I D for sale. Catalogue number: 1.480-235.2 Year of manufacture: 2018 Operating hours: 2,006 h The machine is in very good condition—both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully operational and ready for immediate use. Every machine we offer is presented using actual photos—you buy exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical specifications: Drive type: Diesel Hjdpfxow A Aw De Ap Hont Traction drive: Traction motor Working width (brushes) (mm): 1,045 Working width / suction (mm): 1,440 Water tank: clean/dirty (l): 300 / 300 Debris tank (l): 180 Theoretical area performance (m²/h): 16,550 Practical area performance (m²/h): 12,400 Battery supply (V/Ah): 12 / 80 Gradeability (%): 12 Brush speed (rpm): 460 - 460 Brush pressure (kg): 25 - 150 Water consumption (l/min): max. 12 Sound pressure level (dB(A)): 92 Permissible total weight (kg): 2,635 Dimensions (L x W x H) (mm): 2,490 x 1,570 x 1,860