Used Wurster & Dietz Trimming And Wet Cutting Machine for sale (72,734)

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Lrjdpfx Ajv I D Shehker Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Lrsdpjvfxw Hsfx Ahker Equipment: cutting thickness 40 mm

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Lrodszv N Hpjpfx Ahkjr Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Lrsdpfxszu Avzs Ahker Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Cutting disc diameter: 254 mm Cutting capacity: 65 mm diameter Cutting table: 345 x 155 mm Table travel: 160 mm Drive motor: 2800 rpm, 2.2 kW Power connection: 3 phases, 400 V Footprint: 790 x 700 x 460 mm Ljdpfxszi Suie Ahkjrr Weight (approx.): 80 kg

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right Lsdezv Sa Ejpfx Ahksrr - Sliding roof + Nozzle changer

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Ledpfjzu Akrjx Ahkorr Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) Lodpfxezt A H Rj Ahksrr 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Lredpfxezut Axe Ahker It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Diameter 1070 mm Lrsdou Ni Iuepfx Ahksr 4 axes variable 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. Lrsdpfx Aoxwlthehksr A video of the machine can be sent via WhatsApp.

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades Lodpfoqpdi Ujx Ahkerr with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife. Lodpfxozt H S Ds Ahkerr

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Lsdpfx Ahewcfvpoksrr

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Lrjdpfx Ahozg D I Askor NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, Wursten & Dietz mechanical nailer. Prepared for nailing skates. Ledpfx Ahjlvripsksrr The machine is sold as is.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm Ledpozur Hpefx Ahkerr – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C12302A210I-D, total length: 4,550 mm, total height: 2,500 mm, power of the servo motor: 35,000 W, overall weight: 6,000 kg, product height (max.): 2,500 mm, input voltage: 380 V, For sale: industrial automatic paper cutting machine YYS-I-1750, year 2023. Excellent condition, high-performance (51 kW), suitable for high-productivity paper roll processing. Includes an additional brand-new spare blade. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale. Lrsdpfx Ahezik Dpeker

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Lrodpfx Ajzv Nlfohksr Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer Lrodszv Nk Uopfx Ahksr – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) Lredpfxoztb Els Ahksr - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Ledpfjztn N Djx Ahkorr Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Lrodpezizkysfx Ahker Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, This Lissmac stone cutting machine, manufactured in 2019, will be auctioned online as part of our industrial auction / machine auction, inventory clearance sale by Schnelle & Co. Ebi GmbH – construction equipment, power tools, accessories. Lrodpfxjzv Sb Ao Ahkor You can find this and many other items on our platform.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Lredszt H Tnopfx Ahkjr Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.