Used Wmw Niles, Czech Republic Made Heavy Duty, Floor Lathe ,Cnc (2020) for sale (32,235)

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Dcodezww R Sopfx Albol

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Dcedpfx Aleztff Nsbjl Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: excellent (used), 1600 MM 6000 MM chuck 1400 MM Dodozvaihepfx Albecl Swing over cross slide: 1,350 mm Spindle bore: Ø153 mm

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm Djdsyy Nx Njpfx Albecl - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle Dcodpfxox Hp Iwj Albel 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Year of construction: 2023, machine/vehicle number: 1811058641, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a wire erosion machine manufactured by WEISSER, model: Univertor 8C. TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 34 kVA Control voltage: 24 V DC Dcsdpfxjzy Ukhs Albsl Magnet voltage: 24 V DC Rated machine current: 49 A Main connection fuse: 100 A Short-circuit withstand current: 50 kA

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system Dcodozp Iqaspfx Albel A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Inspection and further information The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Dedpslbgfcjfx Albecl Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, Used pallet racking systems from SSI Schäfer are among the most sought-after solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses as well as industrial and logistics companies that require sturdy and long-lasting racking for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with high weights. Buying used here means you get certified brand quality at a highly attractive price – immediately available for new construction, redesign, or extension of your existing racking system. Individually adaptable: The frame uprights (Type P120) can be refitted to your desired height – professionally and precisely in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor positions - Design: Used SSI Schäfer PR600 - Availability: Immediately ex-stock, multiple units available INCLUDED IN DELIVERY: - 06 × frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × beams approx. 270 cm (INP100 or CE110) - 40 × safety pins Price: 1080.00 € net Dedpfxszy H Ncs Albecl 1285.20 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner freight company – freight costs dependent on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new builds, reconfiguration, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us at our showroom! On site, you can get a comprehensive overview of our pallet racks, storage racks, and further solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are available for any questions and individual consultations – we look forward to your visit! Haven’t found what you’re looking for yet? Visit our website for a quick overview of many offers & variants of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 08:00 to 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations that require robust and durable storage racks for Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used in this context means: tested brand quality at a particularly attractive price – available immediately for new installations, conversions, or extensions of your existing racking system. Customizable: The racking frames (type P120) can be adapted to your desired height – precisely and professionally in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS: - Height: approx. 490 cm - Depth: approx. 105 cm Dedpfx Alozy H Iljbocl - Length: approx. 3090 cm - Shelf load: 3000 / 3500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam color: blue - Frame type: P120, galvanized, pre-assembled - Levels: floor + 2 - Pallet spaces: 99 including floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 12 × frames, approx. 4.90 × 1.05 m, galvanized, pre-assembled - 44 × beams, approx. 270 cm (INP100 or CE110) - 88 × locking pins Price: €2,232.00 net €2,656.08 gross You will receive an invoice including VAT. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery throughout Germany via our partner carriers – freight costs depend on postcode - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation tailored to your specific requirements. Whether for new builds, conversions, or extensions – we offer professional advice for your racking configuration. SHOWROOM: You are very welcome to visit our showroom! On site you can get a comprehensive impression of our pallet racking systems, storage racks, and other solutions. Many systems are assembled and can be experienced directly. Our specialists are available to answer your questions and provide personalized consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Dodpfexddvnox Albscl Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition Dcodpfx Aljxn Tz Iebsl

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Djdezpfgfepfx Albecl Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies * Dsdox Ngzyopfx Albecl

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Dcodpfx Alsy S Duvsbsl Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Dsdpfx Aou T Dryolbecl Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm Dsdpszy Iknofx Albscl MACHINE DETAILS Control system: Hurco WinMax V11 Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps Dcodpjzxlwcjfx Albsl tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *

Condition: good (used), Year of construction: 2002, Control: Siemens Sinumerik 840D Center distance max.: 5000 mm Swing diameter over bed max.: 890 mm Turning diameter max.: 820 mm Spindle bore: 122 mm Spindle diameter in front bearing: 240 mm Spindle nose: A15 / DIN 55026 Main drive power: 80 kW (100% ED) / 105 kW (40% ED) Number of axes: 4 (X, Y, Z, C)C-axis: yes, max. torque 5000 Nm Tool system: Vert./Hor. head, Capto C8 (Sandvik) Milling spindle: 28 kW / 267 Nm (100% ED) Tool magazine: 100 positions, max. tool length 650 mm Travel X: -10 / +490 mm Travel Y: -130 / +300 mm Dodpfx Aozv Hw Sslbocl Travel Z: +180 / +5038 mm Rapid traverse X / Z: 15 m/min, Y: 10 m/min Tailstock: yes, quill diameter 160 mm, taper MK 6 2 steady rests (one of them programmable) Chip conveyor and paper belt filter system Dimensions approx. (L x W x H): 16000 x 4900 x 3300 mm Weight approx.: 35.000 kg

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support). Djdpfxetp Dhpo Albscl  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, Punching machine brand: CCCP ROMENS weight: approx. 5,200 kg table diameter: 630 mm Dcodpfxsykmfys Albsl stroke: 320 mm

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Dedpozwgntofx Albecl Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 610 mm, turning diameter: 350 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 650 mm, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,620 mm, total length: 2,750 mm, total width: 1,535 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 24 m/min, type of input current: three-phase, overall weight: 5,000 kg, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, This machine comes from a training organization and can be seen in operation at our location! Additional options & accessories: - Measuring arm - High-pressure coolant pump - Electronic handwheel - Various 25x25 mm and drill chucks - Foot pedal - 3-jaw chuck, Ø210mm - Original Feeler + FANUC documentation. Weight & dimensions: Dcodpszy Nc Eofx Albsl 5000 kg 2750x1535x1620 mm (LxWxH)

Condition: used, turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Specifications Turning length (mm) 5000 Max. turning diameter (mm) 4000 Max. turning diameter at offset (mm) 5000 Speed ??1.4 - 71 (18x) kW 30 Voltage 380V Hz 50 Dcedsyqtgdjpfx Albol Including: 4-jaw faceplate Ø 3150 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm Dedpfxoxdmgvs Albjcl CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm