Used Weiss Uv200Sb 200 Liter for sale (20,589)

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate Iedjxdl Ixepfx Akxeia 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Iedewc Rk Espfx Akxeia Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) Isdpfjy Dd Nqjx Akxjia (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Iiodpfxsy Dclwo Akxea Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Ijdpey Dclqefx Akxjia Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Iodpfx Aksy Dck Toxoia Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Iiodpjy Dciisfx Akxoa Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 30 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, total width: 2,600 mm, total length: 1,800 mm, grinding diameter: 100 mm, workpiece weight between centers: 30,000 g, distance between centers: 400 mm, type of input current: AC, spindle speed (max.): 1,000 rpm, spindle speed (min.): 90 rpm, grinding spindle motor power: 3,700 W, grinding spindle speed: 2,000 rpm, overall weight: 2,000 kg, pivoting range: 30 °, input voltage: 400 V, Equipment: rotational speed infinitely variable, incl. swiveling internal grinding attachment General Diameter over table: 200 mm Distance between centers (ABC): 400 mm Grinding length: 400 mm Grinding diameter (max. / min. OD): 100 / 6 mm Grinding diameter (max. / min. ID): 85 / 6 mm Max. weight between centers: 30 kg Max. weight incl. chuck: 10 kg Grinding spindle Grinding wheel size: 350 x 127 x 50 mm Minimum usable grinding wheel size: 300 mm Spindle speed: 1800 – 2000 rpm Spindle motor power: 3.7 kW (Peripheral) speed: 33 m/sec Rapid traverse: 40 mm Rapid traverse with handwheel: 20 mm Max. automatic infeed on diameter: 1.7 [3.4] mm Minimum diameter increment: 0.001 mm Infeed speed on diameter (coarse/fine): 0.015 – 6 / 0.015 – 3 mm/min Table Table speed: 0.1 – 5 m/min Table stroke: 450 mm Minimum travel: 2 mm Maximum table swivel range: -2° to +30° Work spindle Taper bore: MT-4 Spindle speed: 90 – 1000 rpm Spindle motor power (2-stage): 0.28/0.37 kW Including complete set of Schaublin collets DM 2.5 – 20 Ijdpfjycg A Asx Akxeia Incl. 3-jaw chuck Incl. flange with grinding wheel

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests Iiedpfeyxm Ulsx Akxsa The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Iiedpfxoytr Swj Akxja Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Iodoygum Depfx Akxsia Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Year of construction: 2022, condition: excellent (used), White Type: T/800/70/10 Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Isdpevxrwgjfx Akxeia Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Ijdovzz A Repfx Akxoia Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Iiedpfx Akelgux Aoxoa Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Iijdpfjq Dpzyex Akxea Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm Iijdpexg Hrksfx Akxoa - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: Isdpfx Ajxxuytokxeia - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Iedpfx Akev Edd Sexeia 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Iiedpfxotmqcwj Akxsa Workpiece diameter: max. 200 mm Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Price, delivery time and equipment of the machine according to agreement.

Condition: used, tank capacity: 200 l, GENERAL Design: rectangular Overall width: 835 mm Overall height: 410 mm Overall length: 1,235 mm Top: open Other: Material: HD-PE Manufacturer: asecos General Building Authority Approval Iiodpsyci Hdsfx Akxea Approval No.: Z-40.22-252 Load capacity: 500 kg with evenly distributed load Internal height: 280 mm Weight: 26 kg/each Type plate missing for 6 units Tubs can be nested when empty Individual tubs may have minor damage on the corners (see photos) Location: Bremen Type plate: Volume: 200 liters Product-contact material: plastic Condition: used FEATURES Outlet: not available

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Remarks: Internal dimensions approx. 1,000 x 1,000 mm; internal height approx. 190 mm (slight slope towards outlet); small dents in the bottom (see photos) Total width: 1,400 mm Total height: 250 mm Total length: 1,380 mm Top: open Location: Bremen Volume: 200 litres Ijdpfx Aksyck I Asxsia Product contact material: V2A 1.4301 (AISI304) Condition: used EQUIPMENT Outlet: DN50 DIN 11851

Condition: used, tank capacity: 200 l, GENERAL Design: upright Remarks: Drum lid made of 1.4541 (V2A); lid partially with connection approx. 6 mm diameter (see photos); drums partly with minor dents Internal diameter: 560 mm Total height: 900 mm Top head: removable / hinged top head Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 860 mm Previous use: pharmaceutical EQUIPMENT Outlet: not available MATERIAL PROPERTIES Iiodoyci S Tepfx Akxea Top head material: AISI304 (V2A) 1.4541

Condition: used, tank capacity: 200 l, GENERAL Equipment: disc valve Design type: horizontal Notes: 4-legged chassis made from V2A; internal dimensions at the top approx. 700 x 1105 mm; internal height approx. 360 mm; 1 tank with 2 dents; hand levers for the disc valves are missing Overall width: 750 mm Overall height: 1,020 mm Overall length: 1,250 mm Top: open Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used TANK Mounting: mobile frame Number of feet: 4 pcs EQUIPMENT Outlet: 35 mm Note: slight residues/adherences MATERIAL SPECIFICATION Isdpfxjycli Ue Akxeia Feet material: stainless steel

Condition: used, tank capacity: 200 l, GENERAL Equipment: Disc valve, spray head, control cabinet (no guarantee) Design: upright Notes: According to the previous operator’s label, the tank has a max. operating pressure of 1.1 bar; 1 dent in the insulation jacket; insulation cover of the lower bottom and counterweight of the lid made from steel; hand lever of the outlet valve is missing Speed: 16.5 / 32 rpm Outer diameter: 920 mm Inner diameter: 790 mm Total height: 1,700 mm Insulation: available Power: 0.88 / 1.3 kW Top: removable / hinged top cover Agitator: anchor agitator Mounting: mobile on castors Location: Bremen Nameplate: Volume: 200 liters Condition: used Cylindrical height: 580 mm Last application: pharmaceuticals TANK Lower bottom: flat bottom with slope Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Material of insulation jacket: stainless steel EQUIPMENT Outlet: 45 mm MATERIAL SPECIFICATION Material, top cover: AISI304 (V2A) 1.4301 Material, cylinder: AISI316 (V4A) 1.4401 Iiedpfx Asxqc Naekxea Material, lower bottom: AISI316 (V4A) 1.4401 Material, feet: stainless steel AGITATOR 1 Voltage: 380 Volt Interference suppressor: Agitator mounting: bottom

Condition: new, Year of construction: 2026, 200L cutter trolley completely made of stainless steel New item Fixed price: 330 euros per unit Currently 50 units in stock Isdeyzrwqspfx Akxsia Intermediate sale reserved Sale without warranty, no returns