Used Weda Autoclude M1000 for sale (83)

Condition: used, Control for cleaning system Dcodpfxob Uhtwj Akcog -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Dcodpfx Aksygxi Njcsg Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Dedpjxhduxsfx Akcocg Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: new, Year of construction: 2025, Programmable adhesive tape dispenser. Activation: Manually at the touch of a button or Automatically via a light barrier. Tape length can be individually adjusted to the millimeter. Dcodpfswbrw Rjx Akceg For adhesive rolls up to 5 cm wide. Hardened knife blades.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Dedpfjym N Nmsx Akcjcg Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Dcsdpfx Akew Ry U Ijceg

Condition: ready for operation (used), * Brand: Humboldt-Wedag Dodpfsywm Uisx Akcocg * Type: PALLA 50 U. * Without: drive.

Condition: excellent (used), Complete Grinding Room for bandsaw blades Dcedekx E Sdjpfx Akcjg

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Quantity: 1 pc Djdpfeik Hbzox Akcocg Price/pc

Condition: used, Scope of delivery see photos Dcsdpjvucgqofx Akcjg Technical data see PDF file *

Condition: new, Semi-automated nailing machine for pallet legs. How does it work? The magazines are manually fed with blocks and boards where after the machine automatically nails the parts together. The machine is equipped with three channels for blocks and a magazine for boards. Easily adjustable It’s easy to produce various types of pallet legs with OM-1000. The machine has three channels for inserting blocks. The cassettes in the channels are changed in order to fit the size of the blocks. The cassettes are easy and fast to readjust. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Asssembled leg size: Min / max length: 600 mm - 1 600 mm Width min / max: 16 mm - 150 mm Leg boards: Min / max length: 600 mm - 1 600 mm Width min / max: 75 mm - 150 mm Thickness: 16mm - 28mm Blocks: Material: Solid wood or pressed blocks Dimension: 70 -100mm Width: 75 -150mm Specifications Operators | 1 Length 2,0 m Width 2,5 m excluding platform ladder Height Djdpjwdutaofx Akcecg 3,6 m Power Electric: 6 kW, 3x400 V+N, Hydraulic: 15 kW, 3x400 V+N Pneumatic system 7 bar compressed dried air: 300 L/min Should be filled and controlled Container for lubricating oil Machine capacity 12 legs/min Standard equipment 3 channels with motorized adjustment 3 cassettes, manually adjustable for block sizes 1 cassette, manually adjustable for board length Operators terminal for production control Program for saving nail positioning Nailing system Electric or hydraulic beam nailing 1 nail box (9 nails) 9 nailing hammerheads Individual nail picking nail indication system Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification Dodendk N Aepfx Akcecg - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 251 cm³, total length: 4,650 mm, total width: 1,450 mm, total height: 2,050 mm, overall weight: 4,600 kg, type of input current: DC, input frequency: 50 Hz, input voltage: 460 V, For sale is an injection molding machine from Battenfeld, model HM1000-75 131426-100. The machine is in excellent condition and is ready for immediate use. Technical Data: Model / Type: HM 100/750 S Year of manufacture: 2008 Total weight: 4,600 kg Hydraulic operating pressure: 275 bar Pneumatic operating pressure: 6 bar Rated voltage: 400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HMB6S131426-100 Rated current: 120 A Max. pre-fuse gL: 100 A Clamping force: 1,000 kN Clear tie bar spacing: 420 x 420 mm Screw diameter: 40 mm Shot volume: 251 cm³ Max. shot weight: 228 g Length: 4,650 mm Width: 1,450 mm Height: 2,050 mm Transport and loading can be arranged across Europe upon request, at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Dcjdpfx Aoy En Sfekcjg Trade-in or exchange is possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell one? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, clamping force: 1,000 kN, clearance between the columns: 420 mm, displacement volume: 192 cm³, type of input current: DC, input frequency: 50 Hz, input current: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical data: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HM B4500028412 0 Dcsdpfx Akoy Enh Tjcjg Max. main fuse: 80 A (1st power supply) / 50 A (2nd power supply) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Maximum shot volume: approx. 192 cm³ Total input current: 63 A or 80 A Transport and loading can be organised Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Trade / Purchase BUYING & SELLING PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2001, operating hours: 126 h, Manufacturer: Wirtgen Dedpfowlimwox Akcscg Type: WM 1000 Year of construction: 2001 Hours: 126 Power: 165 kW Weight: 16,500 kg machine 24,800 kg machine including trailer module Volume: Concrete: 25 m³ Water: 11 m³ Transport dimensions: L: 11.60 m W: 2.55 m H: 4.00 m

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, total width: 1,050 mm, total length: 1,175 mm, total height: 1,600 mm, input frequency: 50 Hz, input current: 10 A, empty load weight: 300 kg, electrical fuse: 16 A, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, type of input current: three-phase, cone rounder Model: KCM 1000 Output max. 1200 pieces/hour Stainless steel version with flour Teflon-coated cones and troughs Effective path approx. 3.5 m Knitting channels adjustable for dough weight from 300 to 1200 g machine mobile Connection 400V, 0.75 kW, 16A-CEE plug Dimensions approx: 1050 x 1150 x 1600 mm, WxDxH Used machine overhauled with 6 months warranty Dsdpfx Ajh H Sq Tskcscg Visit our large sales warehouse with over 400 bakery machines!

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 Dedpfx Akovt Dwbjcscg - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm Dsdovgmlnopfx Akcocg 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: new, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: 828D + Shopmill, total height: 2,800 mm, total length: 2,700 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, table load: 1,200 kg, overall weight: 6,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 850 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Including equipment such as: robust roller guides on all axes, spindle cooling system (oil cooling), fast double-arm tool changer with preselection and vertical magazine with 30 tool positions, hinged belt chip conveyor, coolant through the spindle with 20 bar high-pressure pump, air blast through the spindle, coolant gun, portable electronic handwheel. Dcodpfjyglfqjx Akcsg

Year of construction: 2018, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Dcjdpfoxdangox Akceg Other information Delivery terms: EXW Production country: IT Additional information Please contact Sales Department Collé Sittard for more information

Condition: used, Year of construction: 1974, turning diameter over bed 1320 mm turning diameter over slide rest 820 mm turning length 4400 mm faceplate 1200 mm bed width 800 mm spindle passage 167 mm steady 480 control IMS total power requirement 76 kW Maschinen Nr.: 3987 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Dodpsyqu Szjfx Akcecg Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, machine/vehicle number: 590.067, functionality: fully functional, power: 18 kW (24.47 HP), input current: 63 A, input frequency: 50 Hz, stroke length: 265 mm, table height: 850 mm, throat depth: 250 mm, oil tank capacity: 200 l, total length: 3,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 7,800 kg, controller manufacturer: HÄMMERLE, working width: 2,100 mm, bending force (max.): 100 t, back gauge: 600 mm, control type: manual, degree of automation: semi-automatic, back gauge adjustment: manual, number of axes: 2, type of crowning: manual, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, The machine is fully functional, in working condition, with all main mechanical, hydraulic, and electrical components operating correctly. The press brake was used in industrial production and serviced regularly. Main specifications: Dcjdpsx Tf I Hsfx Akceg Maximum bending force: 100 t Working length: 2,100 mm Ram stroke: 265 mm Throat depth: 250 mm Total power: 18 kW Power supply: 400/230 V, 50 Hz Machine weight: approx. 7,800 kg The press features a robust industrial design, suitable for continuous series as well as small batch sheet metal processing. Control is standard (not CNC). The back gauge is manually adjustable. Essential safety systems are included, such as emergency stop and foot pedal control. The machine is available immediately and can be inspected under power. Assistance with loading can be arranged. Documentation is available upon request.

Condition: excellent (used), Year of construction: 2009, L & Z Lathe (used) Manufacturer: Knuth Model: DM 1000 A Year of manufacture: 2009 Centre height: 180 mm Centre distance: 1000 mm Swing over bed: 360 mm Swing over cross slide: 240 mm Swing in gap: 600 mm Spindle bore: 56 mm Spindle speed range: 30 – 1600 rpm Tailstock taper: MT 4 Quill diameter: 60 mm Quill stroke: 130 mm Motor power (spindle motor): 5.5 kW Bed width: 290 mm Dcedpfx Ajy Axwgekceg Machine weight: 1,500 kg Space requirements approx. L 2200 mm x W 1000 mm x H 1600 mm 3-jaw chuck 250 mm incl. jaws Multifix toolpost, size B incl. insert 3-axis digital readout (Knuth) Chip tray Coolant system Faceplate Fixed steady Travelling steady Machine feet The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Location of the machine: 48477 Hörstel

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. Djdpfsumvnhex Akcecg The machine is ready for painting and is already equipped with1 Bings Marple 8/25 high-pressure pump (up to 175 bar)and 4 Sames-Kremlin AVX Airmix spray guns. The machine is fitted with a changeover valve for quick paint changes, a lever switchable toa maximum of 3 paint circuits and 1 flushing agent pump (options) The machine is in an explosion-proof version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Dodpfx Aoy Amg Ajkcscg Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.