Used Weber Weber Ds 8.5 Pvc Pipe Line Up To 160 Mm for sale (96,184)

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Ksdsvryhyjpfx Ah Esdt Battenfeld R200/6 Battenfeld V125

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Kdodpfsq Ulh Hjx Ah Eot Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Kjdpfx Ahjt Rcn Ne Eodt Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Kdedpfxeyhcabj Ah Est Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Kdjdpezrt Ensfx Ah Eot Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1979, operating hours: 216 h, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Kdodpfsyhcc Aox Ah Eet Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Kdsdpfx Ahozu Nl As Eet Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD Kodpfxozxr Uue Ah Esdt - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Kedpfsw Snu Sjx Ah Eedt Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: used, Year of construction: 2007, machine/vehicle number: CCS 904-7096, total length: 4,900 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 3,650 kg, input voltage: 400 V, track width: 470 mm, construction width: 2,000 mm, input frequency: 50 Hz, Complete Slicing Line The individual modules form an automated slicing and portioning line, from product infeed to transfer to downstream equipment. The exact configuration of this system is documented by the matching serial numbers CCS/CCW/CCR/CCA 904-7096. Weber CCS 904 Slicer No. CCS 904-7096 Year of manufacture: 07/2007 Plastic infeed belt, 3 x 70 mm belt width Outfeed/string belt, 470 mm wide Approx. 4,900 x 2,000 x 2,300 mm Weber CCW Checkweigher No. CCW 904-7096 Year of manufacture: 07/2007 CCW belt width 470 mm Dimensions approx. 600 x 900 x 1,400 mm Weber CCR Line/Diverter Unit No. CCR 904-7096 Year of manufacture: 07/2007 Belt width 470 mm Approx. 500 x 900 x 1,400 mm Weber CCA Depositor No. CCA 904-7096 Year of manufacture: 07/2007 Belt width 590 mm Dimensions approx. 8,600 x 1,450 x 1,700 mm Additionally, a pallet with spare parts is included. Inspection is possible at any time after prior arrangement. Kdjdpfxszwk Evs Ah Ejt

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Ksdpfx Ahjzuk Hbo Eedt Screw diameter: 87 mm Connected load: 90 kW

Condition: used, Year of construction: 2009, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: ABC123, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, overall weight: 15,000 kg, control cabinet width: 6,000 mm, control cabinet length: 400 mm, control cabinet height: 800 mm, For sale: professional Diosna DSP 300 AF industrial dough mixer, manufactured in Germany and in excellent working condition. This is a high-capacity mixer designed for industrial bakeries and large-scale dough production. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Kdsdpfxjx Ta U Uo Ah Eet Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 2 VON HEIN 160 pipe saws Year of manufacture: 1995 and 1996 Kodpoyxqlnefx Ah Eodt With chipping jaws Application: Cutting and chamfering Smallest diameter: 30 mm Largest diameter: 160 mm For PE, PP, and PVC pipes Also suitable for short lengths from 10 mm Condition: Very good, the pipe saws are ready for use The saws are my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: excellent (used), Year of construction: 1995, 3 HEIN TVP 160 PIPE SAWS in stock Year of manufacture: 1995 With chip jaws Application: Cutting and chamfering PE, PP, and PVC pipes: Smallest diameter: 30 mm Largest diameter: 160 mm Ksdpfxsvwm N Ue Ah Eodt Also suitable for short lengths from 10 cm Condition: The pipe saw is operational The saw is my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional Kdsdpfsza Hidex Ah Eet The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Kdedpfxou D Dhxo Ah Ejt Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SCI-H21113, • Circumferential cutting by knife • From Ø32 up to 125 mm • For PVC and PE pipes • Centralized pneumatic clamping • Electric carriage movement • Pneumatic knife clamping • Up to 15 m/min Kdodjyn Rdzopfx Ah Est

Condition: excellent (used), DOUBLE SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Kdodpjywr Tdefx Ah Eet Screw diameter: 104.7 mm and 104.8 mm

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Kdodpfx Ahjzvx Dko Eot Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine Kdedpfx Ahoyv Hzgs Est *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Kdedpex Apckjfx Ah Eot

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Kodpfx Ajttlfksh Ejdt Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: good (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – automatic bandsaw for tubes and profiles, year 2015 Kdedpsz Di Rnsfx Ah Eet We offer for sale a fully automatic bandsaw, the BLM Group ADIGE-SYS EM 80, designed for efficient cutting of tubes and profiles in series production. The machine is equipped with Siemens SINUMERIK CNC control and an automatic material feeding system. This makes it suitable for repetitive production of larger series, with an emphasis on productivity and accuracy. Key technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment and accessories: automatic material feeding system fully automatic working cycle multiple working / tool positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters supply and feeding section of the line Siemens SINUMERIK CNC control technical documentation in German complete electrical documentation The machine is particularly suitable for series production of shorter parts from tubes and profiles, where high repeatability, cutting accuracy and automated operation are important. Machine condition The current owner purchased the machine approximately two years ago for a planned production project, which was ultimately not realized. For this reason, the machine has not been used in regular production since its purchase. The seals of the hydraulic brake on the machine bed have been overhauled. The offer also includes the accessories and set of clamping jaws shown in the photos. The machine can be inspected by prior arrangement.

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Kdedpot H Rrzjfx Ah Eet Location: Pirmasens We will be happy to send you further information on request.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport. Kdsdewplgbepfx Ah Eet