Used Weber 1117033 04.07 Schraubautomat 438612/Kw - Länge: 48Cm for sale (35,913)

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Iiedpezu Ht Refx Abnjf

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A Iiodpfswh Nu Tjx Abnef 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: good (used), Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler Iijdpji En Dqefx Abnef -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Iijdpfx Abezuzctenef Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Ijdpozkmfxjfx Abnoif

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm Iedpozu Nl Aefx Abnjif • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Iijdpfx Absua Eu Nonof Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W Iiodpfxoyimqws Abnof 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Iedpfx Abozttnfonjif Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: ready for operation (used), Year of construction: 2006, A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible. Isdpfxozli Ufe Abnjif

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Iodpfjzli T Iox Abnjif

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Iiodjzli T Ujpfx Abnsf

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Iiedpfx Ajxc Ni Rebnjf

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Iiedpjyx H E Dsfx Abnof

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Iisdpfxszli Ule Abnef

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Serial number: DS 85 777 Isdpfx Aszuk Hbobnoif Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Condition: excellent (used), functionality: fully functional, Due to the closure of our sawmill, we have various machines and accessories for sale (see pictures). If you are interested, please do not hesitate to contact us. - 45 kW motor for Hacker (models 1-3) - New knife set for root reducer (no pictures available) Iodpfx Aoyi Erpjbnsif - Gear wheels / brake discs for Heden forklift trucks (4+5) – forklift trucks are not for sale.

Condition: as good as new (ex-display), All parts from picture come with machine. Iiodegrafkspfx Abnsf

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, rotational speed (min.): 2,982 rpm, input voltage: 500 V, ABB electric motor, 132 kW 50 Hz, 2982 rpm 500 V Iiodpfx Ajv I Ervjbnjf 6-month warranty

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, rotational speed (min.): 1,490 rpm, input voltage: 400 V, input frequency: 50 Hz, 200 kW electric motor IE4 efficiency class Year of manufacture: 2024 Isdpfxon Tntqe Abnsif 6-month warranty 400 V 1490 rpm 315 l

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Isdpszrt Enefx Abneif Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos. Iedpfozphcpsx Abnjif

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Iiedpszpbufsfx Abnef Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Iodjzn N T Tepfx Abnsif Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. Iiedpezn N Auefx Abnef The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F