Used Weber & Uniplast/Greiner Ds 7.22 & Cal-Vak-4P & Cat-Pul-2D for sale (6,961)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Nlodpfxjyhcabs Ahkef Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Nedpfx Ahszwgiqjkslf

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: Nlsdpfx Ahet Rcn Nekjf 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: good (used), WEBER tube extrusion line including: Njdpfx Ahjvryhyjkslf WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Nodpfxex Apcko Ahkelf

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Nledezuk Hbspfx Ahkjf Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Nsdsyhcc Aopfx Ahkelf Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Year of construction: 2007, machine/vehicle number: CCS 904-7096, total length: 4,900 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 3,650 kg, input voltage: 400 V, track width: 470 mm, construction width: 2,000 mm, input frequency: 50 Hz, Complete Slicing Line The individual modules form an automated slicing and portioning line, from product infeed to transfer to downstream equipment. The exact configuration of this system is documented by the matching serial numbers CCS/CCW/CCR/CCA 904-7096. Nsdpfx Ahszwk Evskjlf Weber CCS 904 Slicer No. CCS 904-7096 Year of manufacture: 07/2007 Plastic infeed belt, 3 x 70 mm belt width Outfeed/string belt, 470 mm wide Approx. 4,900 x 2,000 x 2,300 mm Weber CCW Checkweigher No. CCW 904-7096 Year of manufacture: 07/2007 CCW belt width 470 mm Dimensions approx. 600 x 900 x 1,400 mm Weber CCR Line/Diverter Unit No. CCR 904-7096 Year of manufacture: 07/2007 Belt width 470 mm Approx. 500 x 900 x 1,400 mm Weber CCA Depositor No. CCA 904-7096 Year of manufacture: 07/2007 Belt width 590 mm Dimensions approx. 8,600 x 1,450 x 1,700 mm Additionally, a pallet with spare parts is included. Inspection is possible at any time after prior arrangement.

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm Nodpfx Ahezu Nl Askelf • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Nedpfxozvx Dkj Ahkolf Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Njdpfx Aezrt Enohkslf Condition: used

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Nodpfx Ast H Rrzjhkjlf Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request.

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Nsdpfx Ahjhlvm Nokjlf

Condition: excellent (used), functionality: fully functional, power: 67 kW (91.09 HP), operation weight: 9,800 kg, Year of construction: 2005, machine/vehicle number: CAT0432DKWEP01798, excellent condition Nljdsylmkxepfx Ahksf

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E Nodjytx Skopfx Ahkslf motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!

Year of construction: 2023, condition: used, functionality: fully functional, empty load weight: 874 kg, total length: 1,925 mm, construction height: 1,361 mm, construction width: 1,120 mm, Other Technical Condition: New Nsdpezvi Uyjfx Ahkjlf Description: The CAT DE65E0 is an emergency generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideal for providing power during power outages and for mobile and stationary use. Durable, versatile, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. We also offer aerial work platforms and telehandlers for rent and sale. Our equipment is continuously serviced and inspected. Rental, sales, service & repair. You can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with competent and personalized advice.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MzCBP01, overall weight: 1,500 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,900 mm, space requirement length: 3,800 mm, space requirement width: 1,200 mm, space requirement height: 2,000 mm, power: 1.5 kW (2.04 HP), fuel type: electric, fuel consumption per hour: 20 l/h, operating pressure: 1 bar, pressure (max.): 0.6 bar, type of cooling: air, Equipment: CE marking, Automatic cartoning machine is suitable for pharmaceuticals, food, cosmetics, commodities etc.It can open box, fill products into box, then close box with tuck-in or hot-melt sealing. The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It can connect with the Blister Machine, Pillow Packaging Machine, Shrink-Wrapper, etc., to form a Packaging Line. It is the best choice for mass production. Nedpfx Ahexu Aamjkelf

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Nodpfx Ahevzav Nekjlf Subject to changes, prior sale and errors. - .

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Nedpfxszvnbxo Ahkolf Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES Nlsdpfxsywr Tdj Ahkjf SCREW NUMBER: 014.185605 r.920 S

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Nodpfsumvb Iox Ahkjlf Condition (Technical): New Description: The CAT DE110E2 is an emergency power generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideally suited for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this device, we also offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program Nsdpfx Ahozuzctokelf ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2001, This Weber wide belt sanding machine, type: LCE-2000-S-S1350, is being auctioned off in our industrial auction / machinery auction for woodworking machines – edge banding machines – wide belt sanding machines – panel dividing saws – glue application machines, online. Nodpfx Ahszv Rdvjkslf You can find this and many other items on our platform.

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. Nedpfexby Sgox Ahkjlf The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Nledpfx Ahjy Sub Hekof Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).