Used Wanzke Bm153 / Gm3 for sale (43)

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide Lrsdpfxou Icxqo Aftop - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever Lrjdpfxexw Rcuo Aftop - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Year of construction: 1990, Decoiler Coil weight: 2,5 ton Lsdpeuqdhkefx Aftsrp Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min Standard configuration DREHER - Model WAV-MD-25, YOM 2000Electronic universal roller feedSheet width max. 510 mm Sheet thickness max. 6.5 mm Number of feed rollers 2 Diameter of feed rollers 125 mm Feed speed 137 m / min Feed length 0 - 9999.99 mm Feed accuracy +/- 0.05 Drive power 5.5 kW

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm Ledpe N Hcgefx Aftorp total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Lsdpfjhgiyiex Aftjrp Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Lrjdpfshgiwnsx Aftjp Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Lrjdpfx Aocdrmioftep - motorized double-turn coiler - newly painted

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 Lrodpeup Skwofx Aftjp year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Ledpfxsttbd Te Aftjrp

Condition: good (used), Year of construction: 1992, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg Lsdpfx Aey N Anpefterp -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg

Condition: good (used), Year of construction: 1988, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley Lodex Ikcropfx Aftorp -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg

Condition: used, Van Aerzen blower GMA 10.0, 1.77 m3/min GLA 10.0, 3 m3/min GM3S, 2.82 m3/min Lrjdpfx Afjzcfd Eetsp See our other listings VMA Wekerom

Year of construction: 2020, condition: like new (used), For sale GM 3 S and GM 4 S unused perfect condition Gm 3S - 2 pieces Lsdswr Tzrspfx Aftjrp GM 4 S - 6 pieces

Condition: ready for operation (used), Year of construction: 1994, Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible. Ljdpowydghefx Aftjrp

Condition: excellent (used), Wild Heerbrugg M3 – professional stereo microscope Ljdpfxozagaps Afterp I am offering a high-quality stereo microscope from the renowned Swiss company Wild Heerbrugg. This device is suitable for use in laboratories, quality control, electronics, jewelry making, watchmaking, and precision work. Technical specifications: • Manufacturer: Wild Heerbrugg • Model: M3 • Country of manufacture: Switzerland • Binocular head • Focus adjustment • Sturdy laboratory stand • High-quality optics Condition: Used item. Visually in good condition, with normal signs of use. Sold exactly as shown in the photos.

Condition: good (used), mileage: 647,350 km, power: 251 kW (341.26 HP), first registration: 08/2016, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,200 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,660 mm, total width: 2,550 mm, total height: 3,760 mm, loading space length: 8,530 mm, loading space width: 2,470 mm, loading space height: 2,480 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Short cab - Tail lift - LED lamp - Manual - Radio/cassette - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8325 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 600 liters, 2nd diesel tank, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling force: 2 tons, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Heated mirrors, Type of lighting: LED lamp, Lane departure warning system, Climate control, Bluetooth, Engine power: 251 kW (337 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of tail lift: 3000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 175 x 253 = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 9 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 10 mm; Suspension: Air suspension Weights Unladen weight: 8,325 kg Payload: 10,675 kg GVW: 19,000 kg Functional Tail lift: Dhollandia, Rear door, 3000 kg Height of loading area: 120 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 Ljdpsznubvsfx Aftorp = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Lrodezn U S Ispfx Aftep Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Production capacity: up to 90 cans per minute Tooling for approx.: 153 mm Lrjdpfxjt Dhv Se Aftep

Condition: used, High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch Lrjdpfoghnfzjx Aftsp -Manufacturer: Fema Honeywell, pressure switch for fuel gases unused OVP -Type: DGM 310A -Number: 2x pressure switches available -Price: per piece -Dimension box: 160/90/H65 mm -Weight: 0.6 kg/piece

Condition: good (used), collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 Lrsdpfjvm S Ibjx Aftop -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

Year of construction: 2018, condition: new, NEW PLATE SHEAR! MSE HILALSAN AGM-3006 MSE machines has established itself as a reputable name in the field of service and retrofitting for press brakes and shears. For some time now, MSE has been offering used press brakes and shears. These machines are often upgraded with a new Delem control system and PLC to meet modern standards, ensuring years of trouble-free operation. Recently, we have started offering new press brakes, plate shears, and profiling shears. Due to our many years of experience with sheet metal processing machines and the relevant technical knowledge, we are convinced of the quality of the HILALSAN brand. HILALSAN AGM-3006 Cutting capacity: cutting length 3100mm, sheet thickness up to 6mm Equipped with the following options: Elgo P40T CNC cutting clearance adjustment CNC cutting length adjustment CNC cutting angle adjustment AC servo motor for ball screw spindle on the back gauge Rear safety guard Finger guard along the entire length, foldable We can also offer you: Lrodegbkvgjpfx Aftjp Shears with a cutting length of up to 8100mm and a sheet thickness of 20mm. Press brakes with a bending length of up to 6100mm and a pressing force of 1250 tons. Tandem configuration is also an option. Profiling shears with single or double cylinders, allowing operations to be performed simultaneously by two people. Up to 175 tons of pressing force. Various options are available for all machines.

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Lrsdpsvvxumofx Aftsp

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE Ledpfx Afeu Habmstorp - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] Lrodsu Habgopfx Aftep * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Combing unit - Recessing : Push over - Parts catcher - Chips conveyor - Coolant tank - Bar loader : Pietro Cucchi - Oil mist extractor : Donaldson

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: an Edertal meat tenderizer/steak machine, model GM 35, 400V, manufactured in 1998. Lredpfxszcxhkj Aftop The machine is in good condition. Further details upon request! Payment by cash or advance payment. Sale only to business customers; no guarantee, no warranty.